Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Mechanical Engineering Department

Programme of Work




MED21 : Diamond Core And Waterwell Drilling


  • Scope : Formulation of standards for surface exploratory drilling rigs and equipment including diamond core drilling/non-core drilling and geotechnical, and water well drilling rigs including their accessories. It also includes codes of practice for drilling and boring operations.
  • Liaison :
    ISO/TC 82 - Mining - Participating (P)

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 10208 : 1982
ISO 3551-1
Reviewed In : 2022
Specification for diamond core drilling equipment
January, 2022
2
Indigenous
2.
 IS 11189 : 2020
Methods of Tubewell Development ( First Revision )
-
-
Indigenous
3.
 IS 11312 (Part 1) : 1985
Reviewed In : 2022
Specification for external upset drill pipe assemblies for use in water well drilling: Part 1 screwed on joints drill pipe
January, 2022
1
Indigenous
4.
 IS 11632 : 2020
Code of Practice of Rehabilitation of Tubewells ( First Revision )
-
-
Indigenous
5.
 IS 11672 : 1986
Reviewed In : 2022
Specification for tungsten carbide buttons and inserts for use in down - The - Hole (DTH) bits
January, 2022
-
Indigenous
6.
 IS 11710 (Part 1) : 2005
Reviewed In : 2020
Selection and design of diamond core drills - Code of practice: Part 1 mechanical drive (First Revision)
August, 2020
-
Indigenous
7.
 IS 11710 (Part 2) : 2005
Reviewed In : 2020
Selection and design of diamond core drills - Code of practice: Part 2 top drive hydraulic (First Revision)
August, 2020
-
Indigenous
8.
 IS 11830 (Part 1) : 1991
Reviewed In : 2022
Waterwell drilling - Down - The - Hole hammer rigs: Part 1 general requirements for hydraulic rigs (With Or Without Rotary Mode) (First Revision)
January, 2022
-
Indigenous
9.
 IS 11830 (Part 2) : 1989
Reviewed In : 2019
Water - Well drilling - Down - The - Hole hammer rigs: Part 2 general requirements for pneumatic rigs
September, 2019
-
Indigenous
10.
 IS 12214 : 1987
Reviewed In : 2022
General requirements for rotary hose for water - Well drilling equipment
January, 2022
-
Indigenous
11.
 IS 12629 : 1989
Reviewed In : 2019
Water well drilling - Rotary hose for rotary drilling - Recommended practice for care and use
September, 2019
-
Indigenous
12.
 IS 12635 : 2000
Reviewed In : 2020
Water well drilling and blast hole drilling - Rock roller bit with non - Sealed ball and roller bearing arrangement - Technical supply conditions (First Revision)
August, 2020
-
Indigenous
13.
 IS 12682 : 1989
Reviewed In : 2019
Water well drilling - Percussion drilling rigs - General requirements
September, 2019
-
Indigenous
14.
 IS 15028 : 2001
Reviewed In : 2022
Hoisting swivel for use with diamond core drilling - Requirements
January, 2022
1
Indigenous
15.
 IS 15029 : 2001
Reviewed In : 2022
Recovery taps for use with diamond core drilling - Requirements
January, 2022
-
Indigenous
16.
 IS 15083 : 2001
Reviewed In : 2022
Water swivel for use with diamond core drilling - Requirements
January, 2022
-
Indigenous
17.
 IS 15145 : 2002
Reviewed In : 2019
Round kelly for direct rotary water well drilling rig - Requirements
May, 2019
-
Indigenous
18.
 IS 15481 (Part 1) : 2004
ISO 10097-1
Reviewed In : 2021
Wireline diamond core drilling equipment - System A: Part 1 metric units
March, 2021
-
Identical under dual numbering
19.
 IS/ISO 18758-1 : 2018
IS/ISO 18758-1:2018
Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 1: Vocabulary Adoption of ISO 18758
-
Identical under single numbering
20.
 IS/ISO 18758-2 : 2018
IS/ISO 18758-2: 2018
Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 2: Safety requirements Adoption of ISO 18758-2:2018
-
Identical under single numbering
21.
 IS 2800 : 2019

Reviewed In : 2024
Code of practice for construction and testing of tubewells
March, 2024
-
Indigenous
22.
 IS 4097 : 2019

Reviewed In : 2024
Specification for material (Gravel) for use as filter pack in tubewells (First Revision)
March, 2024
-
Indigenous
23.
 IS 7156 : 1974
Reviewed In : 2022
General requirements for reverse circulation drilling rigs
January, 2022
1
Indigenous
24.
 IS 7206 (Part 1) : 1986
Reviewed In : 2022
General requirements for direct circulation rotary drilling rigs: Part 1 with rotary table (First Revision)
January, 2022
1
Indigenous
25.
 IS 7209 : 1974
ISO 722
Reviewed In : 2022
General requirements for blast hole drilling rigs
January, 2022
-
Indigenous
26.
 IS 8110 : 2019

Reviewed In : 2024
Water well screens and slotted pipes - Specification (Third Revision)
March, 2024
1
Indigenous
27.
 IS 8986 : 2022
Hexagonal Integral Drill Steel and Extension Rods and Hollow Round Drill Steel in Bar Form Dimensions Second revision
-
Indigenous
28.
 IS 9026 : 2004
ISO 1720
Reviewed In : 2020
Rope threaded percussive long - Hole drilling equipments - Specification (First Revision)
August, 2020
-
Indigenous
29.
 IS 9439 : 2022
Glossary of Terms Used in Water-well Drilling Technology
-
Indigenous

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
No Records Found

Preliminary Draft Standards

SI. No.
Doc No
TITLE
1
MED 21 (25863)
LOCATION OPERATION AND MAINTENANCE OF TUBEBORE WELLS - Code of Practice

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
1
MED 21 (21462)
Revision of: IS 11830:1991
Water well drilling Part 1 General requirements for hydraulic rigs Down-the-hole hammer or mud rotary drilling

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
MED 21 (19130)
Revision of: IS 7206:1986
Drilling Rigs With Rotary Table Specification
2
MED 21 (19131)
Revision of: IS 11312:1985
External Upset Drill Pipe Assemblies For Use In Water Well Drilling Specification Part 1 Screwed On Joints Drill Pipe
3
MED 21 (21463)
Revision of: IS 12097:1994
Classification and selection of drilling rigs for water well drilling
4
MED 21 (22232)
Revision of: IS 11672:1986
Tungsten Carbide Buttons and Inserts for Use in Down-The-Hole DTH Bits Specification
5
MED 21 (22768)
Revision of: IS 11830:1989
Water well drilling Specification Part 2 General requirements for pneumatic rigs Down-the-hole hammer or mud rotary drilling
6
MED 21 (25065)
Revision of: IS 2800:2019
CONSTRUCTION AND TESTING OF TUBEWELLS CODE OF PRACTICE

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
1
MED 21 (19255)
Revision of: IS 10208:1982
Diamond core drilling equipment Specification First Revision

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
1
MED 21 (18992)

Revision of: IS 15028:2001
Hoisting swivel for use with diamond core drilling Specification
2
MED 21 (18993)

Revision of: IS 15029:2001
Recovery taps for use with diamond core drilling Specification
3
MED 21 (19184)

Revision of: IS 15481:2004
Wireline Diamond Core Drilling Equipment System A Part 1 Metric Units
4
MED 21 (22231)

Revision of: IS 7156:1974
General requirements for reverse circulation drilling rigs - first revision
5
MED 21 (22767)

Revision of: IS 11830:1991
Water well drilling Specification Part 1 General requirements for hydraulic rigs Down-the-hole hammer or mud rotary drilling
6
MED 21 (25062)

Revision of: IS 12682:1989
WATER WELL DRILLING PERCUSSION DRILLING RIGS GENERAL REQUIREMENTS
7
MED 21 (25063)

Revision of: IS 11710:2005
SELECTION OF DIAMOND CORE DRILLS CODE OF PRACTICE PART 1 MECHANICAL DRIVE Second Revision of IS 11710 Part 1
8
MED 21 (25064)

Revision of: IS 11710:2005
SELECTION OF DIAMOND CORE DRILLS CODE OF PRACTICE PART 1 MECHANICAL DRIVE Second Revision of IS 11710 Part 2


Aspect Wise Report

 
 Product:   17
 Code of Practices :    6
 Methods of Test :   0
 Terminology :   3
 Dimensions :   1
 System Standard :   0
 Safety Standard :   1
 Others :    1
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 11180 : 1985
Reviewed In : 2017
Specification for kellys for direct rotary drilling Part 1 square and hexagonal kellys
2.
 IS 12090 : 1987
Reviewed In : 2022
Dimensions of rotary tables for direct rotary drilling equipment
3.
 IS 12097 : 1994
Reviewed In : 2019
Classification and selection of Drilling rigs for water well drilling First Revision
4.
 IS 12194 : 1987
Dimensions for Rock Roller Bits and Blade Drag Bits for Rock Drilling Equipment
5.
 IS 2800 (Part 1) : 1991
Reviewed In : 2017
Code of Practice for Construction and Testing of Tubewells Borewells - Part 1 Construction
6.
 IS 2800 (Part 2) : 1979
Reviewed In : 2014
Code of Practice Construction and Testing - Part II Testing


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 10208 : 1982
ISO 3551-1
Reviewed In : 2022
Specification for diamond core drilling equipment
2.
 IS 11312 (Part 1) : 1985
Reviewed In : 2022
Specification for external upset drill pipe assemblies for use in water well drilling Part 1 screwed on joints drill pipe
3.
 IS 11672 : 1986
Reviewed In : 2022
Specification for tungsten carbide buttons and inserts for use in down - The - Hole DTH bits
4.
 IS 11830 (Part 1) : 1991
Reviewed In : 2022
Waterwell drilling - Down - The - Hole hammer rigs Part 1 general requirements for hydraulic rigs With Or Without Rotary Mode First Revision
5.
 IS 11830 (Part 2) : 1989
Reviewed In : 2019
Water - Well drilling - Down - The - Hole hammer rigs Part 2 general requirements for pneumatic rigs
6.
 IS 12214 : 1987
Reviewed In : 2022
General requirements for rotary hose for water - Well drilling equipment
7.
 IS 12682 : 1989
Reviewed In : 2019
Water well drilling - Percussion drilling rigs - General requirements
8.
 IS 15028 : 2001
Reviewed In : 2022
Hoisting swivel for use with diamond core drilling - Requirements
9.
 IS 15029 : 2001
Reviewed In : 2022
Recovery taps for use with diamond core drilling - Requirements
10.
 IS 15083 : 2001
Reviewed In : 2022
Water swivel for use with diamond core drilling - Requirements
11.
 IS 15145 : 2002
Reviewed In : 2019
Round kelly for direct rotary water well drilling rig - Requirements
12.
 IS 4097 : 2019

Reviewed In : 2024
Specification for material Gravel for use as filter pack in tubewells First Revision
13.
 IS 7156 : 1974
Reviewed In : 2022
General requirements for reverse circulation drilling rigs
14.
 IS 7206 (Part 1) : 1986
Reviewed In : 2022
General requirements for direct circulation rotary drilling rigs Part 1 with rotary table First Revision
15.
 IS 7209 : 1974
ISO 722
Reviewed In : 2022
General requirements for blast hole drilling rigs
16.
 IS 8110 : 2019

Reviewed In : 2024
Water well screens and slotted pipes - Specification Third Revision
17.
 IS 9026 : 2004
ISO 1720
Reviewed In : 2020
Rope threaded percussive long - Hole drilling equipments - Specification First Revision