BUREAU OF INDIAN STANDARDS
Programme of Work
MTD4 : Wrought Steel Products Sectional Committee
- Scope : Standardization in the field of steel and wrought steel products including classification, designation and coding of steels
-
Liaison :ISO/TC 17 - Steel - Participating (P)
ISO/TC 17/SC 10 - Steel for pressure purposes - Participating (P)
ISO/TC 17/SC 12 - Continuous mill flat rolled products - Participating (P)
ISO/TC 17/SC 17 - Steel wire rod and wire products - Participating (P)
ISO/TC 17/SC 17/WG 10 - Non-parallel steel wire and cords for tyre reinforcement
ISO/TC 17/SC 17/WG 20 - Revision of ISO 16650
ISO/TC 17/SC 20 - General technical delivery conditions, inspection documents and sampling for mechanical testing - Participating (P)
ISO/TC 17/SC 3 - Steels for structural purposes - Participating (P)
ISO/TC 17/SC 4 - Heat treatable and alloy steels - Participating (P)
ISO/TC 17/SC 4/SG 1 - Abrasion resistant steels
ISO/TC 17/SC 9 - Tinplate and blackplate - Participating (P)
ISO/TC 17/WG 28 - Guideline for smart manufacturing in iron and steel industry
IEC TC 68 - Magnetic alloys and steels - Participating (P)
IS 10181 : 1982 Reviewed In : 2022 |
Method for determination of magnetic permeability of iron and steel
|
March, 2022
|
-
|
Indigenous
|
|
IS 10206 : 1982 Reviewed In : 2024 |
Methods of sampling steel wires
|
March, 2024
|
-
|
Indigenous
|
|
IS 1029 : 1970 Reviewed In : 2024 |
Specification for hot-rolled steel strip (Baling) (First Revision)
|
March, 2024
|
3
|
Indigenous
|
|
IS 10340 : 1982 Reviewed In : 2024 |
Glossary of terms for cold-reduced tinplate and cold-reduced blackplate
|
March, 2024
|
1
|
Indigenous
|
|
IS/ISO 10474 : 2013 ISO 10474:2013 |
Steel And Steel Products — Inspection--Documents
|
-
|
Identical under dual numbering
|
||
IS 10748 : 2004 Reviewed In : 2021 |
Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)
|
November, 2021
|
2
|
Indigenous
|
|
IS 1079 : 2017 Reviewed In : 2022 |
Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)
|
March, 2022
|
-
|
Indigenous
|
|
IS 10794 : 1984 Reviewed In : 2022 |
Specification for mild steel wire for cotter pins
|
March, 2022
|
-
|
Indigenous
|
|
IS 1136 : 2008 Reviewed In : 2024 |
Preferred sizes for wrought metal products (Third Revision)
|
March, 2024
|
-
|
Indigenous
|
|
IS 1148 : 2009 Reviewed In : 2021 |
Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes
|
November, 2021
|
1
|
Indigenous
|
|
IS 11513 : 2017 Reviewed In : 2022 |
Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)
|
March, 2022
|
1
|
Indigenous
|
|
IS 11587 : 1986 Reviewed In : 2022 |
Specification for structural weather resistant steels
|
March, 2022
|
1
|
Not Equivalent
|
|
IS/ISO 11951 : 2016 ISO 11951 : 2016 Reviewed In : 2021 |
Cold - Reduced tinmill products - Blackplate (First Revision)
|
November, 2021
|
-
|
Identical under single numbering
|
|
IS 12262 : 1988 Reviewed In : 2022 |
Specification for trapezoidal steel wire for spring washers
|
March, 2022
|
-
|
Indigenous
|
|
IS 12367 : 1988 Reviewed In : 2022 |
Specification for cold - Rolled carbon steel strips/coils for manufacture of welded tubes
|
March, 2022
|
-
|
Indigenous
|
|
IS 12457 : 1988 Reviewed In : 2022 |
Code of practice for evaluation, repairs and acceptance limits of surface defects in steel plates and wide flats
|
March, 2022
|
-
|
Not Equivalent
|
|
IS 12591 : 2018 ISO 11950 : 2016 Reviewed In : 2023 |
Cold - Reduced tinmill products - Electrolytic chromium / chromium oxide - Coated steel (Second Revision)
|
July, 2023
|
-
|
Identical under dual numbering
|
|
IS 13566 : 1992 Reviewed In : 2022 |
Recommended practice of pickling by H2so4 levelling and oiling of lpg sheets
|
March, 2022
|
-
|
Indigenous
|
|
IS 13752 : 1993 Reviewed In : 2024 |
Guidelines for reporting sequence of elements in steel and pig iron and mechanical properties in steels
|
March, 2024
|
-
|
Indigenous
|
|
IS 1387 : 1993 Reviewed In : 2024 |
General requirements for the supply of metallurgical materials (Second Revision)
|
March, 2024
|
-
|
Indigenous
|
|
SP 14 : 1976 Reviewed In : 2019 |
Index to steel designations
|
March, 2019
|
-
|
Indigenous
|
|
IS 14246 : 2024 |
CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND STRIPS - SPECIFICATION Second Revision
|
-
|
Indigenous
|
||
IS/ISO 14284 : 1996 Reviewed In : 2021 |
Steel and iron - Sampling and preparation of samples for the determination of chemical composition
|
November, 2021
|
-
|
Identical under single numbering
|
|
IS 14650 : 2023 |
UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)
|
-
|
Indigenous
|
||
IS 14650 : 1999 Reviewed In : 2021 |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation
|
November, 2021
|
1
|
Indigenous
|
|
IS 15103 : 2002 Reviewed In : 2024 |
Fire resistant steel - Specification
|
March, 2024
|
1
|
Indigenous
|
|
IS 15391 : 2003 Reviewed In : 2024 |
Cold rolled non - Oriented electrical steel sheet and strip-semi-processed type - Specification
|
March, 2024
|
3
|
Not Equivalent
|
|
IS 15647 : 2006 Reviewed In : 2021 |
Hot rolled steel narrow width strip for welded tubes and pipes
|
November, 2021
|
-
|
Indigenous
|
|
IS 15911 : 2010 Reviewed In : 2021 |
Structural steel (Ordinary Quality) - Specification
|
November, 2021
|
-
|
Indigenous
|
|
IS 15914 : 2011 Reviewed In : 2021 |
High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification
|
September, 2021
|
1
|
Indigenous
|
|
IS 15961 : 2012 Reviewed In : 2022 |
Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)
|
March, 2022
|
3
|
Not Equivalent
|
|
IS 15962 : 2012 Reviewed In : 2022 |
Structural steels for buildings and structures with improved seismic resistance
|
March, 2022
|
-
|
Not Equivalent
|
|
IS 15965 : 2012 Reviewed In : 2022 |
Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet (Plain)
|
March, 2022
|
-
|
Indigenous
|
|
IS/ISO 16124 : 2015 ISO 16124:2015 |
Steel Wire Rod - Dimensions and Tolerances
|
-
|
Identical under dual numbering
|
||
IS/ISO 16160 : 2012 ISO 16160:2012 |
Hot-rolled steel sheet products Dimensional and shape tolerances
|
-
|
Identical under single numbering
|
||
IS/ISO 16162 : 2012 ISO 16162 : 2012 Reviewed In : 2022 |
Cold - Rolled steel sheet products - Dimensional and shape tolerances (First Revision)
|
March, 2022
|
-
|
Identical under single numbering
|
|
IS/ISO 16163 : 2012 ISO 16163 : 2012 Reviewed In : 2022 |
Continuously hot - Dipped coated steel sheet products - Dimensional and shape tolerances (First Revision)
|
March, 2022
|
-
|
Identical under single numbering
|
|
IS 16585 : 2023 |
MAGNETIC MATERIALS SPECIFICATIONS FOR INDIVIDUAL MATERIALS Fe-BASED AMORPHOUS STRIP DELIVERED IN THE SEMI-PROCESSED STATE
|
-
|
Modified/Technically Equivalent
|
||
IS 16586 : 2024 IEC 60404-16:2018 |
Magnetic materials - Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester first revision
|
-
|
Identical under dual numbering
|
||
IS 1673 : 1984 Reviewed In : 2021 |
Spectfication for mild steel wire, cold heading quality (Second Revision)
|
November, 2021
|
2
|
Indigenous
|
|
IS 16732 : 2019 Reviewed In : 2024 |
Galvanized structural steel - Specification
|
January, 2024
|
-
|
Indigenous
|
|
IS 16998 : 2018 ISO 7452 : 2013 Reviewed In : 2023 |
Hot - Rolled steel plates - Tolerances on dimensions and shape
|
September, 2023
|
-
|
Identical under dual numbering
|
|
SP 17 : 1979 Reviewed In : 2019 |
Glossary of terms relating to iron and steel
|
March, 2019
|
-
|
Indigenous
|
|
IS 17404 : 2020 |
Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips — Specification
|
-
|
Indigenous
|
||
IS 1762 (Part 1) : 1974 Reviewed In : 2024 |
Code for designation of steels: Part 1 based on letter symbols (First Revision)
|
March, 2024
|
1
|
Indigenous
|
|
IS 1812 : 1982 Reviewed In : 2022 |
Specification for carbon steel wire for the manufacture of wood screws (Second Revision)
|
March, 2022
|
1
|
Indigenous
|
|
IS 18316 : 2023 |
HOT ROLLED AND COLD ROLLED STEEL STRIPS INTENDED FOR PROCESSING OF SEMIFULLY PROCESSED NON-GRAIN ORIENTED ELECTRICAL STEEL OR FULLY PROCESSED GRAIN ORIENTED ELECTRICAL STEEL SPECIFICATION
|
-
|
Indigenous
|
||
IS 1835 : 1976 Reviewed In : 2022 |
Specification for round steel wire for ropes (Third Revision)
|
March, 2022
|
3
|
Indigenous
|
|
IS 18384 : 2023 |
Hot-Rolled Steel Strip, Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems � Specification
|
-
|
Indigenous
|
||
IS 18385 : 2023 |
Hot- Dip galvanized/galvannealed Steels Sheet and strips for Automotive Applications- Specification
|
-
|
Indigenous
|
||
IS 18513 : 2023 |
Hot-Dip Zinc- Aluminium-Magnesium Alloy Coated Steel Sheets Plates and Strips - Specification
|
-
|
Not Equivalent
|
||
IS 1852 : 1985 Reviewed In : 2022 |
Specification for rolling and cutting tolerances for hot - Rolled steel products (Fourth Revision)
|
March, 2022
|
2
|
Not Equivalent
|
|
IS 1875 : 1992 Reviewed In : 2021 |
Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)
|
November, 2021
|
2
|
Indigenous
|
|
IS 18809 : 2024 |
Wear and abrasion resistant steel sheet and plate � Specification
|
-
|
Indigenous
|
||
IS 1956 (Part 2) : 2018 Reviewed In : 2023 |
Glossary of terms relating to iron and steel: Part 2 steel making (Second Revision)
|
November, 2023
|
-
|
Not Equivalent
|
|
IS 1956 (Part 3) : 2019 Reviewed In : 2024 |
Glossary of terms relating to iron and steel: Part 3 long products (Including Bars, Rods, Sections And Wires) (Second Revision)
|
January, 2024
|
1
|
Indigenous
|
|
IS 1956 (Part 4) : 2013 Reviewed In : 2024 |
Glossary of terms relating to iron and steel: Part 4 flat products (Second Revision)
|
March, 2024
|
-
|
Not Equivalent
|
|
IS 1990 : 2009 Reviewed In : 2021 |
Steel rivet and stay bars for boilers (Second Revision)
|
November, 2021
|
-
|
Indigenous
|
|
IS 1993 : 2018 ISO 11949 : 2016 Reviewed In : 2023 |
Cold - Reduced tinmill products - Electrolytic tinplate (Fifth Revision)
|
June, 2023
|
-
|
Identical under dual numbering
|
|
IS 2002 : 2009 Reviewed In : 2024 |
Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)
|
March, 2024
|
1
|
Indigenous
|
|
IS 2002 : 2024 |
Steel Plate for Pressure Vessel for Intermediate and High Temperature Service Including Boilers — Specification (Fourth Revision)
|
-
|
Indigenous
|
||
IS 2041 : 2024 |
Steel Plates and Strips for Pressure Vessels Used at Moderate and Low Temperature — Specification (Fourth Revision)
|
-
|
Indigenous
|
||
IS 2041 : 2009 Reviewed In : 2024 |
Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision)
|
March, 2024
|
-
|
Indigenous
|
|
IS 2049 : 1978 Reviewed In : 2024 Decision taken to Reaffirm and Archive |
Colour code for the identification of wrought steels for general engineering purposes (First Revision)
|
March, 2024
|
1
|
Indigenous
|
|
IS 2062 : 2011 Reviewed In : 2021 |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)
|
November, 2021
|
1
|
Not Equivalent
|
|
IS 2100 : 1970 Reviewed In : 2022 |
Specification for steel billets, bars and sections for boilers (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
IS 2255 : 1977 Reviewed In : 2022 |
Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)
|
March, 2022
|
2
|
Indigenous
|
|
IS 2385 : 1977 Reviewed In : 2022 |
Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)
|
March, 2022
|
2
|
Indigenous
|
|
IS 2507 : 1975 Reviewed In : 2021 |
Specification for cold - rolled steel strips for springs (First Revision)
|
November, 2021
|
2
|
Indigenous
|
|
IS 2549 : 2023 |
Processed Ferrous Scrap - Code for Classification ( Second Revision)
|
-
|
Indigenous
|
||
IS 2589 : 1975 Reviewed In : 2022 |
Specificaiton for hard drawn steel wire for upholstery springs (First Revision)
|
March, 2022
|
1
|
Indigenous
|
|
IS 2591 : 1982 Reviewed In : 2022 |
Dimensions for hot rolled steel bars for threaded components (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
IS 277 : 2018 Reviewed In : 2022 |
Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)
|
September, 2022
|
1
|
Indigenous
|
|
IS 279 : 1981 Reviewed In : 2021 |
Specification for galvanized steel wire for telegraph and telephone purposes (Third Revision)
|
November, 2021
|
2
|
Indigenous
|
|
IS 280 : 2006 Reviewed In : 2021 |
Mild steel wire for general engineering purposes (Fourth Revision)
|
November, 2021
|
1
|
Not Equivalent
|
|
IS 2830 : 2012 Reviewed In : 2022 |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)
|
March, 2022
|
1
|
Indigenous
|
|
IS 2831 : 2012 Reviewed In : 2022 |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)
|
March, 2022
|
-
|
Indigenous
|
|
IS 2879 : 1998 Reviewed In : 2024 |
Mild steel for metal arc welding electrodes - Specification (Third Revision)
|
March, 2024
|
2
|
Indigenous
|
|
IS 3024 : 2015 Reviewed In : 2021 |
Grain oriented electrical steel sheet and strip (Third Revision)
|
November, 2021
|
2
|
Not Equivalent
|
|
IS 3039 : 2024 |
STRUCTURAL STEEL FOR CONSTRUCTION OF SHIPS - SPECIFICATION (Third revision)
|
-
|
Indigenous
|
||
IS 3195 : 1992 Reviewed In : 2022 |
Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision)
|
March, 2022
|
2
|
Indigenous
|
|
IS 3298 : 1981 Reviewed In : 2022 |
Specification for mild steel rivet bars for ship building (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
IS 3502 : 2009 Reviewed In : 2021 |
Steel chequered plates (Third Revision)
|
November, 2021
|
1
|
Indigenous
|
|
IS 3885 (Part 1) : 1992 Reviewed In : 2022 |
Steel for the manufacture of laminated springs (Railway Rolling Stock): Part 1 flat sections - Specification (Second Revision)
|
March, 2022
|
2
|
Indigenous
|
|
IS 3885 (Part 2) : 1992 Reviewed In : 2022 |
Steel for the manufacture of laminated springs (Railway Rollingstock): Part 2 rib and groove sections (Second Revision)
|
March, 2022
|
2
|
Indigenous
|
|
IS 3975 : 1999 Reviewed In : 2021 |
Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)
|
November, 2021
|
-
|
Indigenous
|
|
IS 4072 : 1975 Reviewed In : 2022 |
Specification for steel for spring washers (First Revision)
|
March, 2022
|
2
|
Indigenous
|
|
IS 412 : 1975 Reviewed In : 2022 |
Specification for expanded metal steel sheets for general purposes (Second Revision)
|
March, 2022
|
1
|
Indigenous
|
|
IS 4223 : 1975 Reviewed In : 2022 |
Steel Wire For Umbrella Ribs
|
March, 2022
|
1
|
Indigenous
|
|
IS 4224 : 1972 Reviewed In : 2022 |
Specification for steel wire for staples, pins and clips (First Revision)
|
March, 2022
|
2
|
Indigenous
|
|
IS 4397 : 1999 Reviewed In : 2024 |
Cold - Rolled carbon steel strips for ball and roller bearing cages retainers - Specification (Second Revision)
|
March, 2024
|
1
|
Indigenous
|
|
IS 4454 (Part 1) : 2001 Reviewed In : 2021 |
Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)
|
November, 2021
|
-
|
Not Equivalent
|
|
IS 4454 (Part 2) : 2001 Reviewed In : 2021 |
Steel wire for mechanical springs - Specification february 2001: Part 2 oil hardened and tempered steel wire (Second Revision)
|
November, 2021
|
-
|
Not Equivalent
|
|
IS 4824 : 2022 |
Bead wires for tyres - Specification
|
-
|
Indigenous
|
||
IS 4882 : 1979 Reviewed In : 2019 |
Specification for low carbon steel wire for rivets for use in bearing industry (First Revision)
|
April, 2019
|
3
|
Indigenous
|
|
IS 513 (Part 1) : 2016 Reviewed In : 2021 |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)
|
November, 2021
|
2
|
Indigenous
|
|
IS 513 (Part 2) : 2016 Reviewed In : 2021 |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)
|
November, 2021
|
1
|
Indigenous
|
|
IS 5478 : 1969 Reviewed In : 2024 |
Specification for thermostat metal sheet and strip
|
March, 2024
|
-
|
Indigenous
|
|
IS 5872 : 1990 Reviewed In : 2021 |
Cold rolled steel strips (Box Strappings) - Specification
|
November, 2021
|
-
|
Indigenous
|
|
IS 5986 : 2017 Reviewed In : 2021 |
Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)
|
November, 2021
|
-
|
Indigenous
|
|
IS 6240 : 2008 Reviewed In : 2024 |
Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)
|
March, 2024
|
-
|
Not Equivalent
|
|
IS 648 : 2022 |
Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification Sixth Revision
|
-
|
Not Equivalent
|
||
IS 649 : 1997 Reviewed In : 2024 |
Methods of testing steel sheets for magnetic circuits of power electrical apparatus (Second Revision,)
|
March, 2024
|
5
|
Not Equivalent
|
|
IS 6902 : 1973 Reviewed In : 2022 |
Specification for steel wire for spokes
|
March, 2022
|
3
|
Indigenous
|
|
IS 6967 : 1973 Reviewed In : 2022 |
Specification for steels for electrically welded round link chains
|
March, 2022
|
1
|
Indigenous
|
|
IS 7226 : 1974 Reviewed In : 2022 |
Specification for cold - Rolled medium, high carbon and low alloy steel strip for general engineering purposes
|
March, 2022
|
-
|
Indigenous
|
|
IS 7283 : 1992 Reviewed In : 2022 |
Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)
|
March, 2022
|
2
|
Indigenous
|
|
IS 7557 : 1982 Reviewed In : 2022 |
Specification for steel wire (Up To 20 Mm) for the manufacture of cold - Forged rivets (First Revision
|
March, 2022
|
1
|
Indigenous
|
|
IS 7598 : 1990 Reviewed In : 2024 |
Classification of steels (First Revision)
|
March, 2024
|
-
|
Not Equivalent
|
|
IS 7887 : 1992 Reviewed In : 2022 |
Mild steel wire rod for general engineering purposes - Specification (First Revision)
|
March, 2022
|
2
|
Indigenous
|
|
IS 7904 : 2018 Reviewed In : 2023 |
High carbon steel wire rods - Specification (Second Revision)
|
May, 2023
|
-
|
Indigenous
|
|
IS 8052 : 2006 Reviewed In : 2022 |
Steel ingots,billets and blooms for the production of springs, rivets and screws for general engineering applications - Specification (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
IS 8510 (Part 13) : 1977 Reviewed In : 2022 |
Specification for tinned steel wire for banding of armatures and rotors
|
March, 2022
|
1
|
Indigenous
|
|
IS 8563 : 1977 Reviewed In : 2022 |
Specification for half round mild steel wlRe for the manufacture of split pins
|
March, 2022
|
-
|
Indigenous
|
|
IS 8564 : 1977 Reviewed In : 2022 |
Specification for steel wire for nipples for spokes
|
March, 2022
|
-
|
Indigenous
|
|
IS 8565 : 1977 Reviewed In : 2022 |
Specification for heald wire
|
March, 2022
|
-
|
Indigenous
|
|
IS 8566 : 1977 Reviewed In : 2022 |
Specification for steel wire for reeds
|
March, 2022
|
-
|
Indigenous
|
|
IS 8910 : 2022 ISO 404:2013 |
General technical delivery requirements for steel and steel products
|
-
|
Identical under dual numbering
|
||
IS 8917 : 1978 Reviewed In : 2022 |
Specification for steel plates for galvanizing pots
|
March, 2022
|
-
|
Indigenous
|
|
IS 8951 : 2001 Reviewed In : 2021 |
Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision)
|
November, 2021
|
-
|
Indigenous
|
|
IS 8952 : 1995 Reviewed In : 2021 |
Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)
|
November, 2021
|
-
|
Indigenous
|
|
IS 9442 : 1980 Reviewed In : 2022 |
Specification for hot-rolled steel plates, sheets and strips for manufacture of agricultural tillage discs
|
March, 2022
|
-
|
Indigenous
|
|
IS 9476 : 1980 Reviewed In : 2022 |
Specification for cold-rolled steel strips for carbon steel razor blades
|
March, 2022
|
-
|
Indigenous
|
|
IS 9485 : 1980 Reviewed In : 2022 |
Specification for cold - Reduced and hot - Rolled carbon steel sheet for porcelain enamelling
|
March, 2022
|
-
|
Indigenous
|
|
IS 9550 : 2024 |
Bright Steel Bars — Specification (Second Revision)
|
-
|
Not Equivalent
|
||
IS 9550 : 2001 Reviewed In : 2021 |
Bright steel bars - Specification (First Revision)
|
November, 2021
|
2
|
Not Equivalent
|
|
IS 9962 : 1981 Reviewed In : 2022 |
Specification for steel wire for needles
|
March, 2022
|
2
|
Indigenous
|
No Records Found |
MTD 4 (26191)
Revision of: IS 2062:2011 |
Structural Steel Part 1 Hot rolled medium and high tensile non-alloy steel |
|
MTD 4 (26223)
Revision of: IS 2507:1975 |
Cold Reduced Medium and High Carbon Steel Strip |
|
MTD 4 (26252)
Revision of: IS 1875:1992 |
Steel Ingots Billets Blooms Slabs and Bars For Forging Specification Sixth Revision |
|
MTD 4 (26552)
|
Structural Steel Part 2 Hot rolled Quenched and tempered steel plates and wide flats |
|
MTD 4 (26626)
|
Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi fully Processed Non-Grain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel Specification Amendment - 1 |
MTD 4 (26204) |
Pre-Painted Zinc-Aluminium-Magnesium Alloy Coated Steel Strip And Sheet |
|
MTD 4 (26473) |
Grain oriented electrical steel sheet and strip Third Revision Amendment - 3 |
MTD 4 (22804)
Revision of: IS 15961:2012 |
HOT DIP ALUMINIUM-ZINC ALLOY METALLIC COATED STEEL STRIP AND SHEET - SPECIFICATION first revision |
|
MTD 4 (22826)
Revision of: IS 15965:2012 |
PRE-PAINTED ALUMINIUM ZINC ALLOY METALLIC COATED STEEL STRIP AND SHEET -Specification first revision |
|
MTD 4 (24300)
|
Mild steel wire for general engineering purposes Fourth Revision Amendment - 2 |
|
MTD 4 (24663)
Revision of: IS/ISO 14284:1996 |
Steel and iron Sampling and preparation of samples for the determination of chemical composition First Revision |
|
MTD 4 (24672)
|
General technical delivery requirements for steel and steel products Amendment - 1 |
|
MTD 4 (26183)
Revision of: IS 5872:1990 |
Steel strapping for packaging |
|
MTD 4 (26249)
|
Specification for cold - Rolled medium high carbon and low alloy steel strip for general engineering purposes Amendment - 1 |
|
MTD 4 (26436)
|
Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification Sixth Revision Amendment - 1 |
|
MTD 4 (26438)
|
Galvanized steel strips and sheets Plain And Corrugated - Specification Seventh Revision Amendment -2 |
No Records Found |
MTD 4 (23958)
|
Magnetic materials Specification for individual materials Thin electrical steel strip and sheet for use at medium frequencies |
|
IS 10787 : 1984 Reviewed In : 1990 |
Hot-rolled micro-alloyed steel plate sheet and strip for manufacture of low pressure liquifiable gas cylinders |
|
IS 1149 : 1982 Reviewed In : 2009 |
High tensile steel rivet bars for structural purposes |
|
IS/ISO 11951 : 1995 |
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium chromium oxide-coated steel |
|
IS 12313 : 1988 Reviewed In : 2022 |
Specification for hot - Dip terne coated carbon steel sheets |
|
IS 13954 : 2001 |
Double Cold-reduced Electrolytic Tinplate Sheet |
|
IS 13955 : 1994 |
Double Cold Reduced Electrolytic Tinplate Coil For Subsequent Cutting Into Sheets |
|
IS 14491 : 1997 Reviewed In : 2022 |
Low carbon high strength cold rolled steel sheets and coils for cold forming - Specification |
|
IS 1956 (Part 5) : 1976 Reviewed In : 2019 |
Glossary of terms relating to iron and steel Part V bright steel bar and steel wire First Revision |
|
IS 1977 : 1996 |
Low Tensile Structural Steels |
|
IS 1993 : 2006 Reviewed In : 2011 |
Cold-reduced Electrolytic Tinplate |
|
IS 2040 : 1962 |
Steel Bars For Staus |
|
IS 2073 : 1970 |
Carbon steel black bars for production of machined parts for general engineering purposes |
|
IS 226 : 1975 |
Structural steel Standard quality |
|
IS 2517 : 1963 |
Bright bars for threaded components |
|
IS 3422 : 1966 Reviewed In : 1997 |
Code of practice for packaging of steel and steel products for export purposes |
|
IS 3503 : 1966 Reviewed In : 1997 |
Steel for marine boilers pressure vessels and welded machinery structures |
|
IS 3747 : 1982 |
Hot rolled steel plates and sheets for flanging and pressing |
|
IS 3835 : 1966 Reviewed In : 1997 |
Aluminized Steel Core Wire For Aluminium Conductors acsr |
|
IS 3945 : 1966 Reviewed In : 1997 |
Steel for naval purposes |
|
IS 4030 : 1973 |
Cold rolled carbon steel strip for general engineering purposes |
|
IS 4454 (Part 3) : 1975 Reviewed In : 1997 |
Part 3 Oil hardened and tempered steel wiresalloyed |
|
IS 4855 : 1968 |
Bright steel bars for machining |
|
IS 5239 : 1969 Reviewed In : 1997 |
Wire rod for the manufacture of aluminized steel core wire for aluminium conductors |
|
IS 5272 : 1969 |
Carbon steel sheets for integral coaches |
|
IS 597 : 1978 |
Pack-rolled tinplate and pack rolled black plate |
|
IS 5993 : 1970 Reviewed In : 1997 |
Aluminized steel wire for telegraph and telephone purposes |
|
IS 6914 : 1978 |
Cast billets ingots and continuously cast billets for rolling into structural steel standard quality |
|
IS 6915 : 1978 Reviewed In : 2002 |
Cast billet ingots and continuously cast billets for rolling into structural steel oartdinary quality |
|
IS 727 : 1964 |
Hard drawn carbon steel wire for springs for general engineering purposes revised |
|
IS 7270 : 1974 |
Bright Bars standard Quality |
|
IS 7271 : 1974 |
Bright Bars ordinary commerical Quality |
|
IS/ISO 7452 : 2002 Reviewed In : 2013 |
Hot-Rolled structural steel plates - tolerances on dimensions and shape |
|
IS 7904 : 1995 Reviewed In : 2012 |
High Carbon Steel Wire Rods |
|
IS 8051 : 1976 Reviewed In : 2010 |
Steel ingots and billets for the production of volute helical and laminated springs for automotive suspension |
|
IS 8053 : 1976 |
Steel Ingots and Billets for the Production of Steel Wire for the Manufacture of Wood Screws |
|
IS 8054 : 1976 Reviewed In : 2006 |
Steel ingots and billets for production of laminated springs railway rolling stock |
|
IS 8055 : 1976 |
Steel ingots and billets for the production of spring washers |
|
IS 8056 : 1976 Reviewed In : 2001 |
Steel ingots and billets for the production of hard drawn steel wire for upholstry springs |
|
IS 8057 : 1976 Reviewed In : 2001 |
Steel ingots and billets for the production of wire rod for the manufacture of machine screws bart cold heading process |
|
IS 8500 : 1991 |
Structural Steel - Microalloyed Medium and High Strength Qualities |
|
IS 9025 : 1993 ISO 1111-2 Reviewed In : 1998 |
Single Cold-reduced Tinplate and Single Cold-reduced Blackplate - Electrolytic Tinplate Coil and Blackplate Coil for Subsequent Cutting into Sheet For |
|
IS 9467 : 1980 |
Steel ingots and billets for production of rivet bars for structural purposes |
|
IS 9468 : 1980 |
Steel ingots and billets for production of mild steel rivet bars for ship building |
|
IS 9477 : 1980 |
Specification for apparatus for aggregate impact value Second Revision |
|
IS 961 : 1975 |
Structural steel high tensile |
IS 1029 : 1970 Reviewed In : 2024 |
Specification for hot-rolled steel strip Baling First Revision |
|
IS 10748 : 2004 Reviewed In : 2021 |
Hot - Rolled steel strip for welded tubes and pipes - Specification Second Revision |
|
IS 1079 : 2017 Reviewed In : 2022 |
Hot rolled carbon steel sheet plate and strip - Specification Seventh Revision |
|
IS 10794 : 1984 Reviewed In : 2022 |
Specification for mild steel wire for cotter pins |
|
IS 1148 : 2009 Reviewed In : 2021 |
Steel Rivet Bars medium And High Tensile --For Structural Purposes--For Structural Purposes |
|
IS 11513 : 2017 Reviewed In : 2022 |
Hot rolled carbon steel strip for cold rolling purposes - Specification Second Revision |
|
IS 11587 : 1986 Reviewed In : 2022 |
Specification for structural weather resistant steels |
|
IS 12262 : 1988 Reviewed In : 2022 |
Specification for trapezoidal steel wire for spring washers |
|
IS 12367 : 1988 Reviewed In : 2022 |
Specification for cold - Rolled carbon steel strips coils for manufacture of welded tubes |
|
IS 12591 : 2018 ISO 11950 : 2016 Reviewed In : 2023 |
Cold - Reduced tinmill products - Electrolytic chromium chromium oxide - Coated steel Second Revision |
|
IS 14246 : 2024 |
CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND STRIPS - SPECIFICATION Second Revision |
|
IS 14650 : 2023 |
UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION First Revision |
|
IS 15103 : 2002 Reviewed In : 2024 |
Fire resistant steel - Specification |
|
IS 15391 : 2003 Reviewed In : 2024 |
Cold rolled non - Oriented electrical steel sheet and strip-semi-processed type - Specification |
|
IS 15647 : 2006 Reviewed In : 2021 |
Hot rolled steel narrow width strip for welded tubes and pipes |
|
IS 15911 : 2010 Reviewed In : 2021 |
Structural steel Ordinary Quality - Specification |
|
IS 15914 : 2011 Reviewed In : 2021 |
High tensile strength flat rolled steel plate Up To 6 Mm sheet and strip for the manufacture of welded gas cylinder - Specification |
|
IS 15961 : 2012 Reviewed In : 2022 |
Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet Plain |
|
IS 15962 : 2012 Reviewed In : 2022 |
Structural steels for buildings and structures with improved seismic resistance |
|
IS 15965 : 2012 Reviewed In : 2022 |
Pre - Painted aluminium zinc alloy metallic coated steel strip and sheet Plain |
|
IS/ISO 16162 : 2012 ISO 16162 : 2012 Reviewed In : 2022 |
Cold - Rolled steel sheet products - Dimensional and shape tolerances First Revision |
|
IS 16585 : 2023 |
MAGNETIC MATERIALS SPECIFICATIONS FOR INDIVIDUAL MATERIALS Fe-BASED AMORPHOUS STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
|
IS 1673 : 1984 Reviewed In : 2021 |
Spectfication for mild steel wire cold heading quality Second Revision |
|
IS 16732 : 2019 Reviewed In : 2024 |
Galvanized structural steel - Specification |
|
IS 17404 : 2020 |
Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips Specification |
|
IS 1812 : 1982 Reviewed In : 2022 |
Specification for carbon steel wire for the manufacture of wood screws Second Revision |
|
IS 18316 : 2023 |
HOT ROLLED AND COLD ROLLED STEEL STRIPS INTENDED FOR PROCESSING OF SEMIFULLY PROCESSED NON-GRAIN ORIENTED ELECTRICAL STEEL OR FULLY PROCESSED GRAIN ORIENTED ELECTRICAL STEEL SPECIFICATION |
|
IS 1835 : 1976 Reviewed In : 2022 |
Specification for round steel wire for ropes Third Revision |
|
IS 18384 : 2023 |
Hot-Rolled Steel Strip Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems Specification |
|
IS 18385 : 2023 |
Hot- Dip galvanized galvannealed Steels Sheet and strips for Automotive Applications- Specification |
|
IS 18513 : 2023 |
Hot-Dip Zinc- Aluminium-Magnesium Alloy Coated Steel Sheets Plates and Strips - Specification |
|
IS 1852 : 1985 Reviewed In : 2022 |
Specification for rolling and cutting tolerances for hot - Rolled steel products Fourth Revision |
|
IS 1875 : 1992 Reviewed In : 2021 |
Carbon steel billets blooms slabs and bars for forgings - Specification Fifth Revision |
|
IS 18809 : 2024 |
Wear and abrasion resistant steel sheet and plate Specification |
|
IS 1990 : 2009 Reviewed In : 2021 |
Steel rivet and stay bars for boilers Second Revision |
|
IS 2002 : 2024 |
Steel Plate for Pressure Vessel for Intermediate and High Temperature Service Including Boilers Specification Fourth Revision |
|
IS 2041 : 2024 |
Steel Plates and Strips for Pressure Vessels Used at Moderate and Low Temperature Specification Fourth Revision |
|
IS 2062 : 2011 Reviewed In : 2021 |
Hot rolled medium and high tensile structural steel - Specification Seventh Revision |
|
IS 2100 : 1970 Reviewed In : 2022 |
Specification for steel billets bars and sections for boilers First Revision |
|
IS 2255 : 1977 Reviewed In : 2022 |
Specification for mild steel wire rod for the manufacture of machine screws By Cold Heading Process Second Revision |
|
IS 2385 : 1977 Reviewed In : 2022 |
Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate First Revision |
|
IS 2507 : 1975 Reviewed In : 2021 |
Specification for cold - rolled steel strips for springs First Revision |
|
IS 2589 : 1975 Reviewed In : 2022 |
Specificaiton for hard drawn steel wire for upholstery springs First Revision |
|
IS 277 : 2018 Reviewed In : 2022 |
Galvanized steel strips and sheets Plain And Corrugated - Specification Seventh Revision |
|
IS 279 : 1981 Reviewed In : 2021 |
Specification for galvanized steel wire for telegraph and telephone purposes Third Revision |
|
IS 280 : 2006 Reviewed In : 2021 |
Mild steel wire for general engineering purposes Fourth Revision |
|
IS 2830 : 2012 Reviewed In : 2022 |
Carbon steel cast billet ingots billets blooms and slabs for re-rolling into steel for general structural purposes - Specification Third Revision |
|
IS 2831 : 2012 Reviewed In : 2022 |
Carbon steel cast billet ingots billets blooms and slabs for re-rolling into structural steel Ordinary Quality - Specification Fourth Revision |
|
IS 2879 : 1998 Reviewed In : 2024 |
Mild steel for metal arc welding electrodes - Specification Third Revision |
|
IS 3024 : 2015 Reviewed In : 2021 |
Grain oriented electrical steel sheet and strip Third Revision |
|
IS 3039 : 2024 |
STRUCTURAL STEEL FOR CONSTRUCTION OF SHIPS - SPECIFICATION Third revision |
|
IS 3195 : 1992 Reviewed In : 2022 |
Steel for the manufacture of volute and helical springs For Railway Rolling Stock - Specification Third Revision |
|
IS 3298 : 1981 Reviewed In : 2022 |
Specification for mild steel rivet bars for ship building First Revision |
|
IS 3502 : 2009 Reviewed In : 2021 |
Steel chequered plates Third Revision |
|
IS 3885 (Part 1) : 1992 Reviewed In : 2022 |
Steel for the manufacture of laminated springs Railway Rolling Stock Part 1 flat sections - Specification Second Revision |
|
IS 3885 (Part 2) : 1992 Reviewed In : 2022 |
Steel for the manufacture of laminated springs Railway Rollingstock Part 2 rib and groove sections Second Revision |
|
IS 3975 : 1999 Reviewed In : 2021 |
Low carbon galvanized steel wires formed wires and tapes for armouring of cables - Specification Third Revision |
|
IS 4072 : 1975 Reviewed In : 2022 |
Specification for steel for spring washers First Revision |
|
IS 412 : 1975 Reviewed In : 2022 |
Specification for expanded metal steel sheets for general purposes Second Revision |
|
IS 4223 : 1975 Reviewed In : 2022 |
Steel Wire For Umbrella Ribs |
|
IS 4224 : 1972 Reviewed In : 2022 |
Specification for steel wire for staples pins and clips First Revision |
|
IS 4397 : 1999 Reviewed In : 2024 |
Cold - Rolled carbon steel strips for ball and roller bearing cages retainers - Specification Second Revision |
|
IS 4454 (Part 1) : 2001 Reviewed In : 2021 |
Steel wire for mechanical springs - Specification Part 1 cold drawn unalloyed steel wire Third Revision |
|
IS 4454 (Part 2) : 2001 Reviewed In : 2021 |
Steel wire for mechanical springs - Specification february 2001 Part 2 oil hardened and tempered steel wire Second Revision |
|
IS 4824 : 2022 |
Bead wires for tyres - Specification |
|
IS 4882 : 1979 Reviewed In : 2019 |
Specification for low carbon steel wire for rivets for use in bearing industry First Revision |
|
IS 513 (Part 1) : 2016 Reviewed In : 2021 |
Cold reduced carbon steel sheet and strip Part 1 cold forming and drawing purpose Sixth Revision |
|
IS 513 (Part 2) : 2016 Reviewed In : 2021 |
Cold reduced carbon steel sheet and strip Part 2 high tensile and multi - Phase steel Sixth Revision |
|
IS 5478 : 1969 Reviewed In : 2024 |
Specification for thermostat metal sheet and strip |
|
IS 5872 : 1990 Reviewed In : 2021 |
Cold rolled steel strips Box Strappings - Specification |
|
IS 5986 : 2017 Reviewed In : 2021 |
Hot rolled steel sheet plate and strip for forming and flanging purposes - Specification Fourth Revision |
|
IS 6240 : 2008 Reviewed In : 2024 |
Hot rolled steel plate Up To 6 Mm sheet and strip for the manufacture of low pressure liquefiable gas cylinders Fourth Revision |
|
IS 648 : 2022 |
Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification Sixth Revision |
|
IS 6902 : 1973 Reviewed In : 2022 |
Specification for steel wire for spokes |
|
IS 6967 : 1973 Reviewed In : 2022 |
Specification for steels for electrically welded round link chains |
|
IS 7226 : 1974 Reviewed In : 2022 |
Specification for cold - Rolled medium high carbon and low alloy steel strip for general engineering purposes |
|
IS 7283 : 1992 Reviewed In : 2022 |
Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification First Revision |
|
IS 7557 : 1982 Reviewed In : 2022 |
Specification for steel wire Up To 20 Mm for the manufacture of cold - Forged rivets First Revision |
|
IS 7887 : 1992 Reviewed In : 2022 |
Mild steel wire rod for general engineering purposes - Specification First Revision |
|
IS 8052 : 2006 Reviewed In : 2022 |
Steel ingots billets and blooms for the production of springs rivets and screws for general engineering applications - Specification Second Revision |
|
IS 8510 (Part 13) : 1977 Reviewed In : 2022 |
Specification for tinned steel wire for banding of armatures and rotors |
|
IS 8563 : 1977 Reviewed In : 2022 |
Specification for half round mild steel wlRe for the manufacture of split pins |
|
IS 8564 : 1977 Reviewed In : 2022 |
Specification for steel wire for nipples for spokes |
|
IS 8565 : 1977 Reviewed In : 2022 |
Specification for heald wire |
|
IS 8566 : 1977 Reviewed In : 2022 |
Specification for steel wire for reeds |
|
IS 8917 : 1978 Reviewed In : 2022 |
Specification for steel plates for galvanizing pots |
|
IS 8951 : 2001 Reviewed In : 2021 |
Steel cast billet ignots billets and blooms for production of high carbon steel wire rods - Specification First Revision |
|
IS 8952 : 1995 Reviewed In : 2021 |
Steel ingots blooms and billets for production of mild steel wire rods for general engineering purposes - Specification First Revision |
|
IS 9442 : 1980 Reviewed In : 2022 |
Specification for hot-rolled steel plates sheets and strips for manufacture of agricultural tillage discs |
|
IS 9476 : 1980 Reviewed In : 2022 |
Specification for cold-rolled steel strips for carbon steel razor blades |
|
IS 9485 : 1980 Reviewed In : 2022 |
Specification for cold - Reduced and hot - Rolled carbon steel sheet for porcelain enamelling |
|
IS 9550 : 2024 |
Bright Steel Bars Specification Second Revision |
|
IS 9962 : 1981 Reviewed In : 2022 |
Specification for steel wire for needles |