Programme of work

BUREAU OF INDIAN STANDARDS

Metallurgical Engineering Department

Programme of Work

MTD3 : Mechanical Testing of Metals Sectional Committee

Scope : Standardization in the field of mechanical testing of metals
Liaison :

ISO/TC 164 - Mechanical testing of metals - Participating (P)
ISO/TC 164/ SC 1 - Uniaxial testing - Participating (P)
ISO/TC 164/SC 2 - Ductility testing - Participating (P)
ISO/TC 164/SC 3 - Hardness testing - Participating (P)
ISO/TC 164/SC 4 - Fatigue, fracture and toughness testing - Participating (P)
ISO TC 164/SC 1/WG 2 - Creep and stress relaxation testing
ISO TC 164/SC 1/WG 4 - Conventional quasi static tensile test
ISO TC 164/SC 4/WG 2 - Pendulum impact toughness
ISO TC 164/SC 4/WG 3 - Fracture toughness
ISO TC 164/SC 4/WG 4 - Advanced apparatus and analysis
ISO TC 164/SC 4/WG 5 - Fatigue testing: general conditions
ISO TC 164/SC 1/ SG 1 - Continuous force calibration - Participating (P)

Published Standards

SI. No.	IS No.	Title	Reaffirmation Details	No. of Amendments	Degree of Equivalence
1.	IS 10166 : 1982 Reviewed In : 2022 Reaffirmed but not taken up for revision	Method for calibration of standardized test block for verification of scleroscope hardness testing equipments	March, 2022	-	Indigenous
2.	IS 10167 : 1982 Reviewed In : 2022	Method for upsetting test on metallic materials	March, 2022	-	Indigenous
3.	IS 10175 : 2018 ISO 20482:2013 Reviewed In : 2023	Metallic materials - Sheet and strip - Erichsen cupping test (Third Revision)	August, 2023	-	Identical under dual numbering
4.	IS 10180 : 1982 Reviewed In : 2022	Method for plane strain fracture toughness testing of metals	March, 2022	-	Indigenous
5.	IS 10623 : 2023	Drop Weight Tear Test on Ferritic Steels and Line Pipe ? Method of Test		-	Indigenous
6.	IS 10636 (Part 1) : 1983 Reviewed In : 2022 Reaffirmed but not taken up for revision	Methods for measurement of abrasive wear properties of metallic material: Part 1 test method for gouging abrasion resistance (Jaw Crusher Test)	March, 2022	-	Indigenous
7.	IS 10636 (Part 2) : 1983 Reviewed In : 2022 Reaffirmed but not taken up for revision	Method for measurement of abrasive wear properties of metalliC material: Part 2 test method for high stress abrasion	March, 2022	-	Indigenous
8.	IS 10636 (Part 3) : 1983 Reviewed In : 2022 Reaffirmed but not taken up for revision	Methods for measurement of abrasive wear properties of metallic material: Part 3 test methods for low stress abrasion	March, 2022	-	Indigenous
9.	IS 11083 : 1984 Reviewed In : 2022 Reaffirmed but not taken up for revision	Method for evaluation of friction and wear properties of materials against steel surface	March, 2022	-	Indigenous
10.	IS 11240 : 1985 Reviewed In : 2022	Method for falling weight test on metallic materials	March, 2022	-	Indigenous
11.	IS 11999 : 2022 ISO 10113:2020	METALLIC MATERIALS SHEET AND STRIP DETERMINATION OF PLASTIC STRAIN RATIO (Second Revision)		-	Identical under dual numbering
12.	IS 12260 : 2018 ISO 8495 : 2013 Reviewed In : 2023	Metallic Materials - Tube - Ring - Expanding test (First Revision)	August, 2023	-	Identical under dual numbering
13.	IS 12261 : 1987 Reviewed In : 2020	Method for reverse torsion test for metallic wire	February, 2020	-	Not Equivalent
14.	IS 12278 : 2018 ISO 8496:2013 Reviewed In : 2023	Metallic Materials - Tube - Ring tensile test (Second Revision)	August, 2023	-	Identical under dual numbering
15.	12872 : 2021 ISO 9513 : 1999	Metallic Materials - Calibration of Extensometer Systems Used in Uniaxial Testing ( Second Revision )		-	Identical under dual numbering
16.	IS 13237 : 1991 Reviewed In : 2020	Metallic foil - Tension testing	February, 2020	-	Indigenous
17.	IS 13838 : 2023	MECHANICAL TESTING OF METALS- DETERMINATION OF POISSONS RATIO		-	Indigenous
18.	IS 1403 (Part 1) : 1993 ISO 7799:1985 Reviewed In : 2020	Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test	February, 2020	1	Identical under dual numbering
19.	IS 1500 (Part 1) : 2019 ISO 6506-3 : 2014 Reviewed In : 2024	Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)	January, 2024	-	Identical under dual numbering
20.	IS 1500 (Part 2) : 2021 ISO 6506-2 : 2014	Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines		-	Identical under dual numbering
21.	IS 1500 (Part 3) : 2019 ISO 6506-3 : 2014 Reviewed In : 2024	Metallic materials - Brinell hardness test: Part 3 calibration of reference blocks (Fifth Revision)	January, 2024	-	Identical under dual numbering
22.	IS 1500 (Part 4) : 2019 6506-4 : 2014 Reviewed In : 2024	Metallic materials - Brinell hardness test: Part 4 table of hardness values (Fifth Revision)	January, 2024	-	Identical under dual numbering
23.	IS 1501 (Part 1) : 2020 ISO 6507-1 : 2018	Metallic Materials — Vickers Hardness Test Part 1 Test Method ( Fifth Revision )	-	-	Identical under dual numbering
24.	IS 1501 (Part 2) : 2020 ISO 6507-2 : 2018	Metallic Materials — Vickers Hardness Test Part 2 Verification and Calibration of Testing Machines ( Fifth Revision )	-	-	Identical under dual numbering
25.	IS 1501 (Part 3) : 2020 ISO 6507-3 : 2018	Metallic Materials — Vickers Hardness Test Part 3 Calibration of Reference Blocks ( Fifth Revision )	-	-	Identical under dual numbering
26.	IS 1501 (Part 4) : 2020 ISO 6507-4 : 2018	Metallic Materials — Vickers Hardness Test Part 4 Tables of Hardness Values ( Fifth Revision )	-	-	Identical under dual numbering
27.	IS 15420 : 2003 Reviewed In : 2021	Metallic materials - Charpy pendulum impact test - Preparation and characterization of charpy V reference test pieces for verification of test machines	March, 2021	-	Indigenous
28.	IS 15756 : 2022 ISO 10275:2020	Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent		-	Identical under dual numbering
29.	IS 1586 (Part 1) : 2018 Reviewed In : 2023	Metallic materials - Rockwell hardness test: Part 1 test method (Fifth Revision)	May, 2023	-	Identical under dual numbering
30.	IS 1586 (Part 2) : 2018 ISO 6508-2 : 2015 Reviewed In : 2023	Metallic materials - Rockwell hardness test: Part 2 verification and calibration of testing machines and indenters (Fifth Revision)	May, 2023	-	Identical under dual numbering
31.	IS 1586 : 2018 ISO 6508-3:2015 Reviewed In : 2023	METALLIC MATERIALS - ROCKWELL HARDNESS TEST PART 3 CALIBRATION OF REFERENCE BLOCKS	June, 2023	-	Identical under dual numbering
32.	IS 1598 : 1977 Reviewed In : 2020	Method for izod impact test of metals (First Revision)	February, 2020	-	Indigenous
33.	IS 1599 : 2023 ISO 7438 : 2020	Metallic materials Bend test		-	Identical under dual numbering
34.	IS 1608 (Part 1) : 2022 ISO 6892-1 : 2019	Metallic materials - Tensile testing - Part 1 : Method of test at room temperature		-	Identical under dual numbering
35.	IS 1608 (Part 2) : 2020 ISO 6892-2 : 2018	Metallic Materials - Tensile Testing Part 2 Method of Test at Elevated Temperature ( Fourth Revision )		-	Identical under dual numbering
36.	IS 1608 (Part 3) : 2018 ISO 6892-3 : 2015 Reviewed In : 2023	Metallic materials - Tensile testing: Part 3 method of test at low temperature	August, 2023	-	Identical under dual numbering
37.	IS 16842 : 2022 ISO 12108 : 2018	Metallic materials - Fatigue testing - Fatigue crack growth method		-	Identical under dual numbering
38.	IS 16843 : 2018 ISO 12111 : 2011 Reviewed In : 2023	Metallic materials - Fatigue testing - Strain - Controlled thermomechanical fatigue testing method	November, 2023	-	Identical under dual numbering
39.	IS 17143 : 2023 ISO 1352 : 2021	Metallic materials Torque-controlled fatigue testing		-	Identical under dual numbering
40.	IS 17144 (Part 1) : 2019 ISO 14577-1 : 2015 Reviewed In : 2024	Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 1 test method	January, 2024	-	Identical under dual numbering
41.	IS 17144 (Part 2) : 2019 ISO 14577-2 : 2015 Reviewed In : 2024	Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 2 verification and calibration of testing machines	January, 2024	-	Identical under dual numbering
42.	IS 17144 (Part 3) : 2019 ISO 14577-3 : 2015 Reviewed In : 2024	Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 3 calibration of reference blocks	January, 2024	-	Identical under dual numbering
43.	IS 17144 (Part 4) : 2019 ISO 14577-4 : 2016 Reviewed In : 2024	Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 4 test method for metallic and Non - Metallic coatings	January, 2024	-	Identical under dual numbering
44.	IS 17145 (Part 1) : 2019 ISO 12110-1 : 2013 Reviewed In : 2024	Metallic materials - Fatigue testing - Variable amplitude fatigue testing: Part 1 general principles, test method and reporting requirements	January, 2024	-	Identical under dual numbering
45.	IS 17145 (Part 2) : 2019 ISO 12110-2 ; 2013 Reviewed In : 2024	Metallic materials - Fatigue testing - Variable amplitude fatigue testing: Part 2 cycle counting and related data reduction methods	January, 2024	-	Identical under dual numbering
46.	IS 17146 (Part 1) : 2023 ISO 12004-1 : 2020	Metallic materials Determination of forming-limit curves for sheet and strip Part 1: Measurement and application of forming-limit diagrams in the press shop		-	Identical under dual numbering
47.	IS 17146 (Part 2) : 2022 ISO 12004-2:2021	Metallic materials Determination of forming-limit curves for sheet and strip Part 2: Determination of forming-limit curves in the laboratory		-	Identical under dual numbering
48.	IS 17147 : 2019 ISO 12107 : 2012 Reviewed In : 2024	Metallic materials - Fatigue testing - Statistical planning and analysis of data	January, 2024	-	Identical under dual numbering
49.	IS 17149 (Part 1) : 2019 ISO 16859-1 : 2015 Reviewed In : 2024	Metallic materials - Leeb hardness test: Part 1 test method	January, 2024	-	Identical under dual numbering
50.	IS 17149 (Part 2) : 2019 ISO 16859-2 : 2015 Reviewed In : 2024	Metallic materials - Leeb hardness test: Part 2 verification and calibration of the testing devices	January, 2024	-	Identical under dual numbering
51.	IS 17149 (Part 3) : 2019 ISO 16859-3 : 2015 Reviewed In : 2024	Metallic materials - Leeb hardness test: Part 3 calibration of reference test blocks	January, 2024	-	Identical under dual numbering
52.	IS 17151 : 2023 ISO 12135 : 2021	Metallic materials Unified method of test for the determination of quasistatic fracture toughness		-	Identical under dual numbering
53.	IS 1716 : 2023 ISO 7801:1984	Metallic materials Wire Reverse bend test		-	Identical under dual numbering
54.	IS 1717 : 2018 ISO 7800 : 2012 Reviewed In : 2023	Metallic materials - Wire - Simple torsion test (Fourth Revision)	August, 2023	-	Identical under dual numbering
55.	IS 17413 (Part 1) : 2020 ISO 26203-1 : 2018	Metallic Materials - Tensile Testing at High Strain Rates Part 1 Elastic-Bar-Type Systems		-	Identical under dual numbering
56.	IS 17413 (Part 2) : 2020 ISO 26203-2 : 2011	Metallic Materials - Tensile Testing at High Strain Rates Part 2 Servo-Hydraulic and Other Systems		-	Identical under dual numbering
57.	IS 17414 : 2020 ISO 16630 : 2017	Metallic Materials — Sheet and Strip — Hole Expanding Test		-	Identical under dual numbering
58.	IS 17415 : 2023 ISO 18338 : 2021	Metallic materials Torsion test at room temperature		-	Identical under dual numbering
59.	IS 17416 : 2024 ISO 14556 : 2023	Metallic Materials â€” Charpy V-Notch Pendulum Impact Test â€” Instrumented Test Method (First Revision)		-	Identical under dual numbering
60.	IS 17417 (Part 1) : 2020 ISO 4965-1 : 2012	Metallic Materials - Dynamic Force Calibration for Uniaxial Fatigue Testing Part 1 Testing Systems		-	Identical under dual numbering
61.	IS 17417 (Part 2) : 2020 ISO 4965-2 : 2012	Metallic Materials - Dynamic Force Calibration for Uniaxial Fatigue Testing Part 2 Dynamic Calibration Device ( DCD ) Instrumentation		-	Identical under dual numbering
62.	IS 17418 : 2020 ISO 16842 : 2014	Metallic Materials - Sheet and Strip - Biaxial Tensile Testing Method Using a Cruciform Test Piece		-	Identical under dual numbering
63.	IS 17419 : 2020 ISO 17340 : 2014	Metallic Materials - Ductility Testing - High Speed Compression Test for Porous and Cellular Metals		-	Identical under dual numbering
64.	IS 1755 : 2018 ISO 7802 : 2013 Reviewed In : 2023	Metallic Materials - Wire - Wrapping test (Second Revision)	August, 2023	-	Identical under dual numbering
65.	IS 1757 (Part 1) : 2020 ISO 148-1 : 2016 Reviewed In : 2020	Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision )	-	-	Identical under dual numbering
66.	IS 1757 (Part 2) : 2020 ISO 148-2 : 2016	Metallic Materials - Charpy Pendulum Impact Test Part 2 Verification of Testing Machines ( Fourth Revision )		-	Identical under dual numbering
67.	IS 1757 (Part 3) : 2020 ISO 148-3 : 2016	Metallic Materials - Charpy Pendulum Impact Test Part 3 Preparation and Characterization of Charpy V-notch Test Pieces for Indirect Verification of Pendulum Impact Machines ( Fourth Revision )		-	Identical under dual numbering
68.	IS 17679 : 2021 ISO 15653:2018	Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds		-	Identical under dual numbering
69.	IS 17795 : 2022 ISO 204:2018	Metallic materials- Uniaxial creep testing in tension - Method of test		-	Identical under dual numbering
70.	IS 17915 : 2022 ISO 20032 : 2013	Method for evaluation of tensile properties of metallic superplastic materials		-	Identical under dual numbering
71.	IS 17937 : 2022 ISO 13314 : 2011	Mechanical testing of metals Ductility testing Compression test for porous and cellular metals		-	Identical under dual numbering
72.	IS 1828 (Part 1) : 2022 ISO 7500-1 : 2018	METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM		-	Identical under dual numbering
73.	IS 1828 (Part 2) : 2015 IS 1828(Part 2):2014 / ISO 7500-2:2006 Reviewed In : 2020	Metallic materials - Verification of static uniaxial testing machines: Part 2 tension creep testing machines - Verification of the applied force (First Revision)	February, 2020	-	Identical under dual numbering
74.	IS 18733 : 2024 ISO 11531 : 2022	Metallic materials ï¿½ Sheet and strip ï¿½ Earing test		-	Identical under dual numbering
75.	IS 19024 : 2022 ISO 15363 : 2017	Metallic materials Tube ring hydraulic pressure test		-	Identical under dual numbering
76.	IS 2328 : 2018 ISO 8492 : 2013 Reviewed In : 2023	Metallic materials - Tube - Flattening test (Third Revision)	August, 2023	-	Identical under dual numbering
77.	IS 2329 : 2005 IS 2329:2005 / ISO 8491:1998 Reviewed In : 2022	Metallic materials - Tube (In Full Section) - Bend test (Second Revision)	January, 2022	-	Identical under dual numbering
78.	IS 2330 : 2018 8494:2013 Reviewed In : 2023	METALLIC MATERIALS - TUBE - FLANGING TEST	August, 2023	-	Identical under dual numbering
79.	IS 2335 : 2005 IS 2335:2005 / ISO 8493:1998 Reviewed In : 2022	Metallic Materials - Tube - Drift expanding test (Second Revision)	February, 2022	-	Identical under dual numbering
80.	IS 2854 : 1990 Reviewed In : 2022	Determination of young's modulus,tangent modulus and chord modulus - Test method	March, 2022	-	Indigenous
81.	IS 2855 : 1991 Reviewed In : 2020	Thermostat metals - Determinantion of flexivity (First Revision)	February, 2020	-	Indigenous
82.	IS 3394 : 2024	Electrical Resistance Alloys for Heating Elements ï¿½Accelerated Life Test ? Method of Test		-	Indigenous
83.	IS 3394 : 1985 Reviewed In : 2022	Method for accelerated life test of electrical resistance alloys for heating elements (First Revision)	March, 2022	-	Indigenous
84.	IS 3407 (Part 1) : 1983 Reviewed In : 2022	Method for creep testing of steel at elevated temperatures: Part 1 tensile creep testing (First Revision)	March, 2022	-	Indigenous
85.	IS 3407 (Part 2) : 1983 Reviewed In : 2022	Method for creep testing of steel at elevated temperatures: Part 2 tensile creep stress rupture testing (First Revision)	March, 2022	-	Indigenous
86.	IS 3410 : 1993 Reviewed In : 2020	Metallic materials - Determination of linear thermal expansion (First Revision)	February, 2020	-	Indigenous
87.	IS 3711 : 2020 ISO 377 : 2017	Steel and Steel Products — Location and Preparation of Samples and Test Pieces for Mechanical Testing ( Third Revision )	-	-	Identical under dual numbering
88.	IS 3803 (Part 1) : 2023 ISO 2566-1 : 2021	Steel - Conversion of elongation values: Part 1 carbon and low alloy steels		-	Identical under dual numbering
89.	IS 3803 (Part 2) : 2022 ISO 2566-2:2021	Steel Conversion of elongation values Part 2: Austenitic steels		-	Identical under dual numbering
90.	IS 4169 : 2014 ISO 18265:2003 Reviewed In : 2020	Metallic materials - Calibration of force proving instruments used for the verification of uniaxial testing machines (Second Revision)	February, 2020	-	Identical under dual numbering
91.	IS 4258 : 2018 ISO 18265:2013 Reviewed In : 2023	Metallic materials - Conversion of hardness values (Third Revision)	August, 2023	-	Identical under dual numbering
92.	IS 5069 : 2018 ISO 23718 : 2007 Reviewed In : 2023	Metallic Materials - Mechanical Testing - Vocabulary (Second Revision)	August, 2023	-	Identical under dual numbering
93.	IS 5070 : 1985 Reviewed In : 2022	Method for beam unnotched impact test for grey cast iron (First Revision)	March, 2022	-	Indigenous
94.	IS 5074 : 2023 ISO 1099 : 2017	Metallic materials -- Fatigue testing -- Axial force-controlled method		-	Identical under dual numbering
95.	IS 5075 : 2023 ISO 1143 : 2021	METALLIC MATERIALS - ROTATING BAR BENDING FATIGUE TESTING		-	Identical under dual numbering
96.	IS 5242 : 1979 Reviewed In : 2022	Method of test for determining shear strength of metals (First Revision)	March, 2022	-	Indigenous
97.	IS 6885 (Part 1) : 2020 ISO 4545-1 : 2017	Metallic Materials — Knoop Hardness Test Part 1 Test Method ( Second Revision )	-	-	Identical under dual numbering
98.	IS 6885 (Part 2) : 2020 ISO 4545-2 : 2017	Metallic Materials — Knoop Hardness Test Part 2 Verification and Calibration of Testing Machines ( Second Revision )	-	-	Identical under dual numbering
99.	IS 6885 (Part 3) : 2020 ISO 4545-3 : 2017	Metallic Materials — Knoop Hardness Test Part 3 Calibration of Reference Blocks ( Second Revision )	-	-	Identical under dual numbering
100.	IS 6885 (Part 4) : 2020 ISO 4545-4 : 2017	Metallic Materials — Knoop Hardness Test Part 4 Tables of Hardness Values ( Second Revision )	-	-	Identical under dual numbering
101.	IS 6886 : 1973 Reviewed In : 2022	Method of dynamic force calibration of axial load fatigue testing machines by means of a strain gauge technique	March, 2022	-	Indigenous
102.	IS 7096 : 1981 Reviewed In : 2022 Reaffirmed but not taken up for revision	Method for scleroscope hardness testing of metallic materials (first Revision)	March, 2022	-	Indigenous
103.	IS 7172 : 1984 Reviewed In : 2022 Reaffirmed but not taken up for revision	Method for verification of scleroscope hardness testing machines (First Revision)	March, 2022	-	Indigenous
104.	IS 8632 : 2023 ISO 3785:2006	Metallic materials Designation of test specimen axes in relation to product texture		-	Identical under dual numbering

Standards Under Develpoment

Projects Approved

SI. No.	Doc No	TITLE
No Records Found

Preliminary Draft Standards

SI. No.	Doc No	TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.	Doc No	TITLE
No Records Found

Draft Standards Completed WC Stage

SI. No.	Doc No	TITLE
1	MTD 3 (20807) Revision of: IS 10167:1982	Method for upsetting test on metallic materials
2	MTD 3 (25816) Revision of: IS 1586:2018	Metallic materials Rockwell hardness testPart 1 Test method
3	MTD 3 (25817) Revision of: IS 1586:2018	Metallic materials Rockwell hardness testPart 2 Verification and calibration of testing machines and indenters
4	MTD 3 (25818) Revision of: IS 1586:2018	Metallic materials Rockwell hardness testPart 3 Calibration of reference blocks
5	MTD 3 (25819) Revision of: IS 1501:2020	Metallic materials Vickers hardness test Part 1 Test method
6	MTD 3 (25830)	Metallic materials Ductility testing High speed compression test for porous and cellular metals
7	MTD 3 (25831) Revision of: IS 17795:2022	Metallic materials Uniaxial creep testing in tension Method of test
8	MTD 3 (25832) Revision of: IS 6885:2020	Metallic materials Knoop hardness test Part 1 Test method

Finalized Draft Indian Standard

SI. No.	Doc No	TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.	Doc No	TITLE
1	MTD 3 (20806) Revision of: IS 1598:1977	Izod Impact Test of Metals Method of Test Second Revision
2	MTD 3 (20809) Revision of: IS 6886:1973	Dynamic Force Calibration of Axial Load Fatigue Testing Machines by Means of a Strain Gauge Technique Method of Test
3	MTD 3 (24421)	Metallic Materials Fatigue Testing Axial-Strain-Controlled Method

Total Published Standards:102 Total Standards Under development : 11

Aspect Wise Report

Product:	0
Code of Practices :	3
Methods of Test :	97
Terminology :	1
Dimensions :	2
System Standard :	0
Safety Standard :	0
Others :	0
Service Specification :	0
Process Specification :	0
Unclassified :	0

Total :103

Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.	IS No.	Title
1.	IS 10175 (Part 1) : 1993 ISO 8490 Reviewed In : 2009	Mechanical testing of metals -Modified erichsen cupping test - sheet and strip Pt 1 Thickness upto 2 mm
2.	IS 10588 : 1983 Reviewed In : 2001	Tables of Brinell hardness values for use in test made on flat surfaces
3.	IS 10927 (Part 1) : 1984 Reviewed In : 1996	Tables of Vickers Hardness Values for Use in Tests Made on Flat Surfaces - Part 1 HV 5 to HV 100
4.	IS 10927 (Part 2) : 1984 Reviewed In : 1996	Tables of Vickers Hardness Values for Use in Tests Made on Flat Surfaces - Part 2 Hv 0 2 to Less Than Hv 5
5.	IS 10927 (Part 3) : 1991 Reviewed In : 1999	Tables of Vickers Hardness Values for use in Tests Made on Flat Surfaces - Part 3 Less than HV 0 2
6.	IS 12514 : 1988 ISO 9513 : 1999 Reviewed In : 2020	Method for torsional stress fatigue testing
7.	IS 1499 : 1977 Reviewed In : 2020	Method for charpy impact test U - Notch for metals First Revision
8.	IS 1500 : 2005 IS 1500(Part 1):2013 / ISO 6506-1:2005 Reviewed In : 2010	Method for Brinell Hardness Test for Metallic Materials
9.	IS 1501 : 2002 Reviewed In : 2007	Method For Vickers Hardness Test for Metallic Materials
10.	IS 1521 : 1972	Method for tensile testing of steel wire
11.	IS 1586 : 2000 Reviewed In : 2010	Method for Rockwell Hardness Test for Metallic Material Scales A-B-C-D-E-F-G-H-K 15N 30N 45N 15T 30T and 45T
12.	IS 1608 : 2005 IS 1608:2005 / ISO 6892:1998 Reviewed In : 2017	Mechanical testing of metals - Tensile Testing
13.	IS 1663 : 1972	Method for tensile testing of steel sheet and strip of thickness 0 5 mm to 3 mm
14.	IS 1663 (Part 2) : 1962	Tensile testing of steel sheet and strip Part 2 Steel sheet and strip of thickness above 3 mm
15.	IS 1692 : 1974	Method for simple bend testing of steel sheet and strip less than 3 mm thick
16.	IS 1754 : 2002 IS 1754:2002 / ISO 6507-2:1997 Reviewed In : 2020	Method for verification of vickers hardness testing machines Third Revision
17.	IS 1754 (Part 1) : 1986 Reviewed In : 1996	Method for Verification of Vickers Hardness Testing Machines Part I HV 0 2 to HV 100
18.	IS 1754 (Part 2) : 1986 Reviewed In : 1996	Method for Verification of Vickers Hardness Testing Machines Part 2 Less than HV 0 2
19.	IS 1756 : 1974	Methods of modified Erichsen cupping test for steel sheet and strip
20.	IS 1789 : 1961	Method for brinell hardness test for grey cast iron
21.	IS 1790 : 1961	Method for brinell hardness test for light metals and their alloys
22.	IS 1810 : 1961	Method for vickers hardness test for light metals and their alloys
23.	IS 1816 : 1979	Method for tensile test for light metals and their alloys
24.	IS 1894 : 1972	Criteria for earthquake resistant design of structures Fourth Revision
25.	IS 2078 : 1979	Method for tensile testing of grey cast iron
26.	IS 223 : 1950	Tensile Testing Of Metals ferrous
27.	IS 2281 : 2005 IS 2281:2005 / ISO 6506-2:1999 Reviewed In : 2011	Method for Verification of Brinell Hardness Testing Machines
28.	IS 2348 : 1963 Reviewed In : 2008	Method for drift expanding test on copper and copper alloy tubes
29.	IS 2654 : 1977	Method for tensile testing of copper and copper alloys
30.	IS 2655 : 1964	Method for tensile testing of copper and copper alloy tubes
31.	IS 2656 : 1964	Method for tensile testing of copper and copper alloy wires
32.	IS 2657 : 1964	Method for tensile testing of aluminium and aluminium alloy tube
33.	IS 2658 : 1964	Method for tensile testing for aluminium and aluminium alloy wire
34.	IS 2866 : 1968	Method for Vickers hardness test for copper and copper alloys
35.	IS 3054 : 1965	Method for Brinell hardness test for copper and copper alloys
36.	IS 3260 : 1965	Method For Bend Test For Copper And Copper Alloys
37.	IS 3388 : 1965	Method for wrapping test for copper and copper alloy wire
38.	IS 3408 : 1965	Method for non-interrupted creep testing of steel at elevated temperature
39.	IS 3409 : 1965	Method for creep stress rupture testing of steel of elevated temperature
40.	IS 3754 : 1988 Reviewed In : 1999	Method for calibration of standardized blocks to be used for Rockwell hardness testing machines Scales A-B-C-D-E-F-G-H-K
41.	IS 3766 : 1977 IS 3803(Part 1):1989 / ISO 2566-1 : 1984 Reviewed In : 2020	Method for calibration of pendulum impact testing machines for testing metals First Revision
42.	IS 3804 : 1988 Reviewed In : 1999	Method for calibration of Rockwell hardness testing machines Scales A-B-C-D-E-F-G-H-K
43.	IS 4132 : 2005 Reviewed In : 2011	Method for calibration of standardized blocks to be used for Brinell hardness teing machines
44.	IS 4133 : 2002 IS 4133:2002 / ISO 6507-3:1997 Reviewed In : 2012	Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines
45.	IS 4133 (Part 1) : 1986 Reviewed In : 1996	Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines - Part 1 HV 0 2 to HV 100
46.	IS 4168 : 1967	Method for wrapping test of aluminium and aluminium alloy wire
47.	IS 4176 : 1967	Method for simple torsion test of aluminium and aluminium alloy wire
48.	IS 4177 : 1967	Method for flattening test of aluminium and aluminium alloy tubes
49.	IS 4598 : 1968	Method for simple bend test for aluminium and aluminium alloy sheet and strip of thickness between 0 2 mm and 7 mm
50.	IS 4599 : 1968	Method For Drift Expanding Test On Aluminium And Aluminium Alloy Tubes
51.	IS 4713 : 1968	Method for determination of lower yield stress proof stress and proving test for steel at elevated temperatures
52.	IS 497 : 1953	Tensile testing of metals non-ferrous
53.	IS 5071 : 1969	Method for flattening test for copper and copper alloy tubes of circular section
54.	IS 5072 : 1988 Reviewed In : 1999	Method for Rockwell Superficial Hardness Test scale 15n 30n 45n 15t 30t and 45t
55.	IS 5073 : 1988 Reviewed In : 1999	Method for verification of Rockwell superficial hardness testing machines Scales 15N 30N 45N 15T 30T and 45T
56.	IS 5076 : 1988 Reviewed In : 1999	Method for calibration of standardized blocks to be used for rockwell superficial hardness testing machines Scales 15N 30N 45N 15T 30T and 45T
57.	IS 5619 : 1970	Recommendations for fatigue testing of metals
58.	IS 6253 : 1971	Method for simple torsion testing of copper and copper alloy wire
59.	IS 6520 : 1972	Method for the determination of K-values of a tensile testing system
60.	IS 6878 : 1973	Method of reverse bend testing of copper and copper alloy wire
61.	IS 6885 : 1973	Method for Knoop hardness testing of metals
62.	IS 7095 : 1973 Reviewed In : 2010	Method for verification of Knoop hardness testing machines
63.	IS 7097 : 1973 Reviewed In : 2010	Method for Calibration of Standardized Blocks for Verification of Knoop Hardness Testing Machines
64.	IS 8285 : 1976 Reviewed In : 1991	Method for tensile test of copper and copper alloy rolled flat product thickness less than 2 5 mm
65.	IS 9258 : 1979	Method for vickers micro-hardness testing of metals

Annexure-II :List of Indian Product Standards

SI. No.	IS No. & Year	Title
No Records Found