BUREAU OF INDIAN STANDARDS
Programme of Work
LITD2 : Dependability of Electronic, Electrical Components, Equipment and Systems
- Scope : To prepare national standards in the field of dependability, in electronics, electrical, electromechanical components, equipment and systems including those not normally dealt with by other LITD Technical Committees. Dependability is the ability to perform as and when required and is time dependent in application. Dependability can be expressed in terms of core attributes of availability, reliability, maintainability and supportability that are tailored to application-specific functional and service attributes. LITD 02 standards are related to products, processes and management activities. The standards provide systematic methods and tools for dependability assessment, technical risk assessment and management of services and systems throughout their life cycles. Dependability is managed through life cycle processes involving availability and its core performance attributes of reliability, availability, maintainability and maintainability support.
-
Liaison :IEC/TC 56 - Dependability - Participating (P)
|
IS 15037 : 2020 IEC 61078 : 2016 Reviewed In : 2023 |
Reliability Block Diagrams ( Second Revision )
|
September, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15038 : 2011 IEC 61164: 2004 Reviewed In : 2023 |
Reliability growth - Statistical test and estimation methods (First Revision)
|
September, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15444 (Part 1) : 2012 IEC 61163-1: 2006 Reviewed In : 2022 |
Reliability stress screening: Part 1 repairable assemblies Manufactured in lots (First Revision)
|
August, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 15444 (Part 2) : 2020 IEC 61163-2 : 2020 Reviewed In : 2023 |
Reliability Stress Screening Part 2 Components ( First Revision )
|
November, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15474 (Part 1) : 2019 IEC 60300-1 : 2014 Reviewed In : 2022 |
Dependability Management Part 1 Guidance for Management and Application
|
October, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 15474 (Part 3/Sec 1) : 2018 IEC 60300-3-1 : 2003 Reviewed In : 2021 |
Dependability management: Part 3 application guide: Sec 1 analysis techniques for dependability - Guide on methodology
|
October, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 15474 (Part 3/Sec 2) : 2018 IEC 60300-3-2 : 2004 Reviewed In : 2021 |
Dependability Management Part 3 Application Guide Selection 2 Collection of Depedability Data from the Field
|
May, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 15474 (Part 3/Sec 3) : 2021 IEC 60300-3-3: 2017 |
Dependability management Part 3 Application guide Section 3 Life cycle costing Superseding IS 15474 :2004
|
-
|
Identical under dual numbering
|
||
|
IS 15474 (Part 3/Sec 5) : 2018 IEC 60300-3-5 : 2001 Reviewed In : 2021 |
Dependability Management Part 3 Application Guide Section 5 Reliability Test Conditions and Statistical Test Principles
|
May, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 15474 (Part 3/Sec 10) : 2018 IEC 60300-3-10 : 2001 Reviewed In : 2021 |
Dependability Management Part 3 Application Guide Section 10 Maintainability
|
May, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 15474 (Part 3/Sec 11) : 2014 IEC 60300-3-11 : 2009 Reviewed In : 2023 |
Dependability Management Part 3 Application Guide Section 11 Reliability Centred Maintenance
|
September, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15474 (Part 3/Sec 14) : 2019 IEC 60300-3-14 : 2004 Reviewed In : 2022 |
Dependability Management Part 3 Application Guide Section 14 Maintenance and maintenance support
|
October, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 15474 (Part 3/Sec 15) : 2021 IEC 60300-3-15 : 200 |
Dependability Management Part 3 Application guide Section 1 Engineering of system dependability Superseding IS 15613 :2005
|
-
|
Identical under dual numbering
|
||
|
IS 16957 : 2018 IEC 61882 : 2016 Reviewed In : 2021 |
Hazard and operability studies (Hazop Studies) - Application guide
|
June, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 16958 : 2018 IEC 61882 : 2016 Reviewed In : 2019 |
Obsolescence management - Application guide
|
October, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 1885 (Part 192) : 2021 IEC 60050-192: 2015 |
Electrotechnical Vocabulary Part 192 Dependability (Superseding IS 1885 Part 39 :1999 )
|
-
|
Identical under dual numbering
|
||
|
IS/IEC 60605-6 : 2007 IEC 60605-6 : 2007 Reviewed In : 2022 |
Equipment Reliability Testing Part 6 Tests for the Validity and Estimation of the Constant Failure Rate and Constant Failure Intensity
|
August, 2022
|
-
|
Identical under single numbering
|
|
|
IS/IEC 60706-2 : 2006 IEC 60706-2: 2006 Reviewed In : 2022 |
Maintainability of equipment Part 2 Maintainability requirements and studies during the design and development phase
|
August, 2022
|
-
|
Identical under single numbering
|
|
|
IS/IEC 60706-3 : 2006 IEC 60706-3 : 2006 Reviewed In : 2022 |
Maintainability of Equipment Part 3 Verification and Collection, Analysis and Presentation of Data
|
August, 2022
|
-
|
Identical under single numbering
|
|
|
IS/IEC 60706-5 : 2007 IEC 60706-5 : 2007 Reviewed In : 2022 |
Maintainability of Equipment Part 5 Testability and Diagnostic Testing
|
August, 2022
|
-
|
Identical under single numbering
|
|
|
IS/IEC 60812 : 2018 IEC 60812 : 2018 Reviewed In : 2023 |
Failure Modes and Effects Analysis ( FMEA and FMECA )
|
November, 2023
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61025 : 2006 IEC 61025 : 2006 Reviewed In : 2023 |
Fault Tree Analysis ( FTA )
|
November, 2023
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61123 : 2019 61123: 2019 |
Reliability testing - Compliance test plans for success ratio Superseding IS 8161 Part 5: 2011
|
-
|
Identical under single numbering
|
||
|
IS/IEC 61124 : 2012 Reviewed In : 2022 |
Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity
|
October, 2022
|
-
|
Identical under dual numbering
|
|
|
IS/IEC 62506 : 2013 IEC 62506: 2013 |
Product Accelerated Testing � Methods
|
-
|
Identical under single numbering
|
||
|
IS/IEC 62508 : 2010 IEC 62508 : 2010 |
Guidance on human aspects of dependability Superseding IS 11743:1986
|
-
|
Identical under single numbering
|
||
|
IS/IEC 62628 : 2012 IEC 62628 : 2012 |
Guidance on software aspects of dependability
|
-
|
Identical under single numbering
|
||
|
IS 7354 (Part 3) : 2011 IEC 60319: 1999 Reviewed In : 2023 |
Guide on reliability of electronic and electrical items: Part 3 presentation and specification of reliability data for electronic components (Second Revision)
|
November, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 8161 (Part 2) : 2018 IEC 60605-2 : 1994 Reviewed In : 2021 |
Equipment reliability testing: Part 2 design of test cycles (First Revision)
|
June, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 8161 (Part 4) : 2018 NULL Reviewed In : 2021 |
Equipment reliability testing: Part 4 statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals (First Revision)
|
October, 2021
|
-
|
Identical under dual numbering
|
| No Records Found |
| No Records Found |
| No Records Found |
|
LITD 2 (23128)
|
Weibull Analysis |
|
|
LITD 2 (23129)
|
Equipment Reliability Reliability assessment methods |
|
|
LITD 2 (23130)
|
Obsolescence management Superseding IS 16958 2018 |
|
|
LITD 2 (23131)
|
Electric components Reliability Reference conditions for failure rates and stress models for conversion Superseding IS 7354 Part 3 2011 |
|
|
LITD 2 (23165)
|
Mathematical expressions for reliability availability maintainability and maintenance support terms |
|
|
LITD 2 (23166)
|
Reliability growth Stress testing for early failures in unique complex systems |
|
|
LITD 2 (23167)
|
Spare Parts Provisioning |
|
|
LITD 2 (23168)
|
Root cause analysis RCA |
| No Records Found | ||
| No Records Found |
|
|
IS 10052 (Part 3) : 1983 SEC 3 CISPR 16 Reviewed In : 1994 |
Electromagnetic Interference Measuring Apparatus And Measuring Methods Part 3 Radiation Measurement Of Electromagnetic Interference |
|
|
IS 10052 (Part 4) : 1984 SEC 5 CISPR 16 Reviewed In : 1996 |
Electromagnetic Interference Measuring Apparatus And Measuring Methods Part 4 Electromagnetic Interference Measuring Apparatus Having Detectors Other Than Quasi-Peak |
|
|
IS 10052 (Part 5) : 1986 SEC 9 CISPR 16 Reviewed In : 1996 |
Electromagnetic Interference Measuring Apparatus And Measuringmethods Part 5 Statistical Considerations In The Determination Of Limits Of Electromagnetic Interference |
|
|
IS 10052 (Part 6) : 1992 |
Electromagnetic Interference measuring apparatus and measurement methods Part 6 Measurement of the shielding efficiency of the coaxial cables having one or two braids in the metric wavelength range |
|
|
IS 10052 (Part 7) : 1993 |
Electromagnetic Interference Measuring Apparatus And Measuring Methods Part 7 Audio Frequency Interference Measurement |
|
|
IS 10139 : 1982 Reviewed In : 2019 |
Presentation of reliABility maintainABility and availABility predictions |
|
|
IS 10673 : 1983 IEC Pub 410 Reviewed In : 2019 |
Sampling plans and procedures for inspection by attributes for electronic items |
|
|
IS 11137 (Part 2) : 2012 IEC 60812: 2006 Reviewed In : 2019 |
Analysis techniques for system reliABility Part 2 procedure for failure mode and effects analysis Fmea First Revision |
|
|
IS 11743 : 1986 Reviewed In : 2019 |
Guide on human safety in design manufacture use and maintenance of electronic equipment |
|
|
IS 12708 : 1988 CISPR 20 Reviewed In : 1993 |
Measurement of the Immunity of Sound And Television Broadcast Receivers and Associated Equipment from Radio-sources Operating in the Frequency Range 1 5 Mhz to 30 Mhz by the Current Injection Method |
|
|
IS 13140 (Part 1) : 1991 |
Disturbances in supply systems caused by household appliances and similar electrical equipment Part 1 Definitions |
|
|
IS 13140 (Part 3) : 1993 |
Disturbances in supply systems caused by household appliances and similar electrical equipment Part 3 Voltage fluctuations |
|
|
IS 13149 : 1991 |
Flickermeter Functional and design specifications |
|
|
IS 15036 : 2001 Reviewed In : 2016 |
Dependability Management - Application Guide Analysis Techniques for Dependablility - Guide on Methodology |
|
|
IS 15474 : 2004 Reviewed In : 2019 |
DependABility management - Application guide - Life cycle costing |
|
|
IS 15474 (Part 3/Sec 6) : 2005 IEC 60300-3-6: 1997 Reviewed In : 2016 |
DependABility management - Part 3 application guide - Sec 6 software aspects of dependABility |
|
|
IS 15474 (Part 3/Sec 7) : 2005 IEC 60300-3-7: 1999 Reviewed In : 2019 |
DependABility management Part 3 application guide Sec 7 reliABility stress screening of electronic hardware |
|
|
IS 15613 : 2005 IEC 61713: 2000 Reviewed In : 2019 |
Software dependability through the software life - Cycle processes - Application guide |
|
|
IS 1885 (Part 3/Sec 3) : 1967 |
Electrotechnical vocabulary Part 3 - Acoustics Sec 3 - Sound recording and reproduction |
|
|
IS 1885 (Part 39) : 1999 Reviewed In : 2019 |
Electrotechnical vocabulary Part 39 dependABility of electronic and electrical items Second Revision |
|
|
IS 1885 (Part 64/Sec 1) : 1987 IEC 50(704) |
Electrotechnical vocabulary Part 64 Electromagnetic compatibility Sec 1 General terms |
|
|
IS 1885 (Part 64/Sec 2) : 1987 |
Electrotechnical vocabulary Part 64 Electromagnetic compatibility Sec 2 Specific terms |
|
|
IS 2106 (Part 1) : 1962 |
Environmental tests for electronic and electrical equipment Part 1 - General |
|
|
IS 2106 (Part 2) : 1962 |
Environmental tests for electronic and electrical equipment Part 2 - Damp heat cycling test |
|
|
IS 2106 (Part 3) : 1963 |
Environmental tests for electronic and electrical equipment Part 3 - Cold test |
|
|
IS 2106 (Part 4) : 1963 |
Environmental tests for electronic and electrical equipment Part 4 - Dry heat test |
|
|
IS 2106 (Part 5) : 1964 |
Environmental tests for electronic and electrical equipment Part 5 - Low air pressure test |
|
|
IS 2106 (Part 6) : 1965 |
Environmental tests for electronic and electrical equipment Part 6 - Rapid change of temperature |
|
|
IS 2106 (Part 7) : 1964 |
Environmental tests for electronic and electrical equipment Part 7 - Bump test |
|
|
IS 2106 (Part 8) : 1964 |
Environmental tests for electronic and electrical equipment Part 8 - Impact or shock test |
|
|
IS 2106 (Part 9) : 1964 |
Environmental tests for electronic and electrical equipment Part 9 - Drop test |
|
|
IS 2106 (Part 10) : 1965 |
Environmental tests for electronic and electrical equipment Part 10 - Water immersion test |
|
|
IS 2106 (Part 11) : 1965 |
Environmental tests for electronic and electrical equipment Part 11 - Water spray test |
|
|
IS 2106 (Part 12) : 1965 |
Environmental tests for electronic and electrical equipment Part 12 - Dust test |
|
|
IS 2106 (Part 13) : 1973 |
Environmental tests for electronic and electrical equipment Part 13 - Mould growth test |
|
|
IS 2106 (Part 14) : 1966 |
Environmental tests for electronic and electrical equipment Part 14 - Constant acceleration test |
|
|
IS 2106 (Part 15) : 1966 |
Environmental tests for electronic and electrical equipment Part 15 - Gas-tightness test |
|
|
IS 2106 (Part 16) : 1971 |
Environmental tests for electronic and electrical equipment Part 16 - Vibration test |
|
|
IS 2106 (Part 17) : 1973 |
Environmental tests for electronic and electrical equipment Part 17 - Stimulated solar radiation at ground level |
|
|
IS 2106 (Part 18) : 1973 |
Environmental tests for electronic and electrical equipment Part 18 - Salt mist test |
|
|
IS 589 : 1961 |
Basic climatic and mechanical durability tests for components for electronic and electrical equipment |
|
|
IS 6842 : 1997 |
Limits for electromagnetic Interference |
|
|
IS 6872 : 1972 |
Radio interference measuring apparatus for the frequency range 0 15 MHz to 1000 MHz |
|
|
IS 6873 (Part 6) : 1983 CISPR 16 Reviewed In : 1989 |
Methods of Measurement of Electromagnetic Interference - Part 6 From High Voltage Transmission Systems |
|
|
IS 7025 : 1973 |
Guidance On Solar Radiation Testing |
|
|
IS 7354 (Part 1) : 1975 Reviewed In : 2019 |
Guide on reliability of electronic and electrical items Part 1 Preliminary reliability considerations |
|
|
IS 7354 (Part 2) : 1984 Reviewed In : 2019 |
Guide on Reliability of Electronic and Electrical Items - Part 2 Reliability and Maintainability Management |
|
|
IS 7354 (Part 4) : 1974 Reviewed In : 2019 |
Guide on reliABility of electronic and electrical items Part 4 collection of reliABility availABility and maintainABility data from performance |
|
|
IS 7354 (Part 5) : 1975 Reviewed In : 2019 |
Guide on reliability of electronic and electrical items Part 5 Inclusion of lot-by-lot and periodic inspection procedures in specifications electronic and electrical components or parts |
|
|
IS 7354 (Part 6) : 1983 Reviewed In : 2019 |
Guide on reliability of electronic and electrical items Part 6 Inclusion of reliability clauses into specifications for components or parts |
|
|
IS 7690 : 1975 Reviewed In : 2019 |
Mathematical guide to the terms and definitions for reliABility of electronic equipment and components Or Parts used therein |
|
|
IS 7805 : 1975 |
Guidance on mould growth testing redesignated as IS 9001 Part 10 |
|
|
IS 8145 : 1976 |
Test chambers of non-injection type for constant relative humidity |
|
|
IS 8161 (Part 1) : 1999 Reviewed In : 2019 |
Guide for equipment reliABility testing Part 1 principles and procedures First Revision |
|
|
IS 8161 (Part 3/Sec 1) : 1986 Reviewed In : 2019 |
Guide for Equipment Reliability Testing - Part 3 Preferred Test Conditions for Equipment Reliability Testing - Section 1 Indoor Portable Equipment Low Degree of Simulation |
|
|
IS 8161 (Part 3/Sec 2) : 1986 Reviewed In : 2019 |
Guide for Equipment Reliability Testing - Part 3 Preferred Test Conditions for Equipment Reliability Testing - Section 2 Equipment for Stationery Use in Weather Protected Locations High Degree of Simulation |
|
|
IS 8161 (Part 5) : 2011 IEC 61123: 1991 Reviewed In : 2022 |
Guide for equipment reliability testing Part 5 compliance test plans for success ratio First Revision |
|
|
IS 8161 (Part 6) : 1983 Reviewed In : 2015 |
Guide for equipment reliability testing Part 6 tests for validity of a constant failure rate assumption |
|
|
IS 8161 (Part 6/Sec 1) : 1983 Reviewed In : 2016 |
Guide for equipment reliABility testing Part 6 tests for validity of a constant failure rate assumption Sec 1 chi - Square test |
|
|
IS 8161 (Part 6/Sec 2) : 1987 Reviewed In : 2016 |
Guide for equipment reliABility testing Part 6 tests for validity of a constant failure rate assumption Sec 2 kolmogorov - Smirnov test |
|
|
IS 8161 (Part 7) : 2012 IEC 61124: 2006 Reviewed In : 2015 |
Guide for equipment reliABility testing Part 7 compliance tests for constant failure rate and constant failure intensity First Revision |
|
|
IS 8161 (Part 11) : 1983 Reviewed In : 2019 |
Guide for equipment reliability testing Part 11 flow chart describing preparations for and execution of reliability tests |
|
|
IS 8456 : 1977 |
Guidance on method of mounting of electronic and electrical items for dynamic tests |
|
|
IS 9185 (Part 1) : 1979 Reviewed In : 2019 |
Endurance Life test for electronic and electrical components Part 1 thermal endurance |
|
|
IS 9185 (Part 2) : 1979 Reviewed In : 2019 |
Endurance Life Test for electronic and electrical components Part 2 mechanical endurance |
|
|
IS 9186 : 1979 Reviewed In : 2019 |
Guide for screening of electronic and electrical items |
|
|
IS 9513 : 1979 CISPR 6 |
Audio frequency interference voltmeter |
|
|
IS 9615 : 1980 |
Guide on General Aspects of electromagnetic interference suppression |
|
|
IS 9692 (Part 1) : 1980 Reviewed In : 2019 |
Guide on maintainABility of equipment Part 1 introduction to maintainABility |
|
|
IS 9692 (Part 2) : 1980 Reviewed In : 2019 |
Guide on maintainABility of equipment Part 2 maintainABility requirements in specifications and contracts |
|
|
IS 9692 (Part 3) : 1981 Reviewed In : 2019 |
Guide on maintainABility of equipment Part 3 maintainABility programme |
|
|
IS 9692 (Part 4) : 1987 Reviewed In : 2016 |
Guide on maintainABility of equipment Part 4 test and diagnostic procedures |
|
|
IS 9692 (Part 5) : 1985 Reviewed In : 2019 |
Guide on maintainABility of equipment Part 5 maintainABility studies during the design phase |
|
|
IS 9692 (Part 6) : 1983 Reviewed In : 2019 |
Guide on maintainABility of equipment Part 6 maintainABility verification |
|
|
IS 9692 (Part 7) : 1984 Reviewed In : 2019 |
Guide on maintainABility of equipment Part 7 collection analysis and presentation of data related to maintainABility |
|
|
IS 9692 (Part 8/Sec 1) : 1988 Reviewed In : 2016 |
Guide on maintainABility of equipment Part 8 maintenance and maintenance support planning Sec 1 general |
|
|
IS 9692 (Part 8/Sec 2) : 1988 Reviewed In : 2016 |
Guide on maintainABility of equipment Part 8 maintenance and maintenance support planning Sec 2 maintenance support analysis |
|
|
IS 9692 (Part 8/Sec 3) : 1988 Reviewed In : 2016 |
Guide on maintainABility of equipment Part 8 maintenance and maintenance support planning Sec 3 maintenance planning analysis |
|
|
IS 9692 (Part 8/Sec 4) : 1988 Reviewed In : 2016 |
Guide on maintainABility of equipment Part 8 maintenance and maintenance supporting planning Sec 4 maintenance support resources requirements |