Programme of work

• Scope : STANDARDIZATION IN THE FIELD OF STRUCTURAL ENGINEERING USING STEEL/ALUMINIUM STRUCTURAL SECTIONS INCLUDING PIPELINES FOR GAS AND FORMULATION OF INDIAN STANDARDS ON DIMENSIONS/TOLERANCES OF VARIOUS HOT ROLLED/COLD FORMED SECTIONS, BARS AND FLAT PRODUCTS IN STEEL AND ALUMINIUM FOR STRUCTURAL AND GENERAL ENGINEERING APPLICATIONS.
• Liaison :
  ISO/TC 167 - Steel and aluminium structures - Participating (P)

SI. No.	IS No.	Title	Reaffirmation Details	No. of Amendments	Degree of Equivalence
1.	IS 10182 (Part 1) : 1982 Reviewed In : 2021	Dimensions and tolerances for hot rolled track shoe sections: Part 1: Sec TS - L1	January, 2021	-	Indigenous
2.	IS 10182 (Part 2) : 1985 Reviewed In : 2021	Dimensions and tolerances for hot rolled track shoe sections: Part 2: Sec TS - H1	January, 2021	-	Indigenous
3.	IS 10987 : 1992 Reviewed In : 2022	Code of Practice for Design, Fabrication, Testing and Installation of Under - Ground/Above - Ground Horizontal CylindricalSteel Storage Tanks for Petroleum Products (First Revision)	December, 2022	-	Indigenous
4.	IS 1173 : 1978 Reviewed In : 2024	Specfication for Hot Rolled and Slit Steel Tee Bars (Second Revision)	March, 2024	-
5.	IS 1252 : 1991 Reviewed In : 2022	Hot Rolled Steel Bulb Angles - Dimensions (First Revision)	December, 2022	-	Indigenous
6.	IS 12778 : 2004 Reviewed In : 2019	Hot rolled parallel flange steel sections for beams, columns and bearing piles - Dimensions and section properties		-	Indigenous
7.	IS 12779 : 1989 Reviewed In : 2024	Rolling and cutting tolerances for hot rolled parallel flange beam and column sections - Specification	March, 2024	-	Indigenous
8.	IS 12843 : 1989 Reviewed In : 2021	Tolerances for erection of steel structures	January, 2021	-
9.	IS 15663 (Part 1) : 2006 Reviewed In : 2021	Design and installation of natural gas pipelines - Code of Practice : Part 1 Laying of pipelines	July, 2021	-	Indigenous
10.	IS 15663 (Part 2) : 2006 Reviewed In : 2021	Design and installation of natural gas pipelines - Code of Practice : Part 2 Laying of pipelines in crossings	July, 2021	-	Indigenous
11.	IS 15663 (Part 3) : 2006 Reviewed In : 2021	Design and installation of natural gas pipelines - Code of Practice : Part 3 Pre-commissioning and commissioning of pipelines	July, 2021	-	Indigenous
12.	IS 1730 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision	Steel Plates, Sheets Strips and Flats for Structural and General Engineering Purposes - Dimensions (Second Revision)		-	Modified/Technically Equivalent
13.	IS 1732 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision	Steel Bars, Round and Square for Structural and General Engineering Purposes - Dimensions (Second Revision)		-
14.	IS 17740 : 2022	Isolated Towers, Masts and Poles using Structural Steel - Code of Practice		-	Indigenous
15.	IS 1863 : 1979 ISO 657-19 Reviewed In : 2024	Specification for Rolled Steel Bulb Flats (First Revision)	March, 2024	-	Identical under dual numbering
16.	IS 1864 : 1979 ISO 657-18 Reviewed In : 2024	Specification for Hot Rolled Steel 'L' Sections for Ship Building (First Revision)	March, 2024	-	Not Equivalent
17.	IS 2314 (Part 1) : 2023	Steel Sheet Piling Section — Specification Part 1 Hot Rolled Sheet Pile (Second Revision)		-	Indigenous
18.	IS 2314 (Part 2) : 2023	Steel Sheet Piling Section — Specification Part 2 Cold Formed Sheet Pile (Second Revision)		-	Indigenous
19.	IS 2713 (Part 1 to 3) : 1980 Reviewed In : 2022	Tubular Steel Poles for Overhead Power Lines	December, 2022	2
20.	IS 2750 : 1964 Reviewed In : 2021	Specification for steel scaffoldings	January, 2021	3	Indigenous
21.	IS 3443 : 1980 Reviewed In : 2019 Reaffirmed but not taken up for revision	SPecification for Crane Rail Sections (First Revision)		1
22.	IS 3908 : 1986 Reviewed In : 2022	Specification for Aluminium Equal Leg Angles (First Revision)	December, 2022	-
23.	IS 3909 : 1986 Reviewed In : 2022	Specification for Aluminium Unequal Leg Angles (First Revision)	December, 2022	-
24.	IS 3921 : 1985 Reviewed In : 2021	Specification for Aluminium Channels (First Revision)	January, 2021	-
25.	IS 3954 : 1991 Reviewed In : 2021 Reaffirmed but not taken up for revision	Hot Rolled Steel Channel Sections for General Engineering Purposes - Dimensions (First Revision)	January, 2021	-
26.	IS 3964 : 1980 Reviewed In : 2021 Reaffirmed but not taken up for revision	Specifiacation for Light Rails (First Revision)	January, 2021	1
27.	IS 4000 : 1992 Reviewed In : 2022	High strength bolts in steel structures - Code of practice (First Revision)	December, 2022	1	Indigenous
28.	IS 4014 (Part 1) : 1967 Reviewed In : 2021 Reaffirmed but not taken up for revision	Code of practice for steel tubular scaffolding: Part 1 definitions and materials	January, 2021	-	Indigenous
29.	IS 5384 : 1985 Reviewed In : 2021	Specification for Aluminium I-Beam (First Revision)	January, 2021	-
30.	IS 5488 : 1987 Reviewed In : 2021 Reaffirmed but not taken up for revision	Dimensions and Dimensional Tolerances for Hot Rolled Steel Plates for Ship's Hull Structure (First Revision)	January, 2021	-	Not Equivalent
31.	SP 6-4 : 1969	Isi handbook for structural engineers: Part 4 use of high strength friction grip bolts		-	Indigenous
32.	SP 6-5 : 1980	Handbook for structural engineers: Part 5 cold - Formed, light gauge steel structures		1	Indigenous
33.	SP 6-6 : 1972	Isi handbook for structural engineers: Part 6 application of plastic theory in design of steel structures: sec A		-	Indigenous
34.	IS 6445 : 1985 Reviewed In : 2021	Specification for Aluminium Tee - Sections (First Revision)	January, 2021	-	Indigenous
35.	IS 6449 : 1987 Reviewed In : 2024	Specification for Aluminium Bulb Angles for Marine Application (First Revision)	March, 2024	-	Indigenous
36.	IS 6475 : 1987 Reviewed In : 2024	Specification for Aluminium Tee bars for Marine Application (First Revision)	March, 2024	-	Indigenous
37.	IS 6476 : 1987 Reviewed In : 2024	Specification for Aluminium Bulb Plates for Marine Application (First Revision)	March, 2024	-	Indigenous
38.	IS 7205 : 1974 Reviewed In : 2021	Safety Code for Erection of Structural Steel Work	January, 2021	-	Indigenous
39.	IS 7215 : 1974 Reviewed In : 2021	Tolerances for fabrication of steel structures	January, 2021	1	Indigenous
40.	IS 800 : 2007 Reviewed In : 2022	General construction in steel - Code of practice (Third Revision)	December, 2022	2	Indigenous
41.	IS 801 : 1975 Reviewed In : 2021	Code of practice for use of cold - Formed light gauge steel structural members in general building construction (First Revision)	January, 2021	1	Indigenous
42.	IS 802 (Part 1/Sec 1) : 2015 Reviewed In : 2020	Use of structural steel in overhead transmission line towers - Code of practice: Part 1 materials, loads and design strengths: sec 1 materials and loads (Fourth Revision)	August, 2020	1	Indigenous
43.	IS 802 (Part 1/Sec 2) : 2016 Reviewed In : 2021	Use of Structural Steel in Overhead Transmission Line Towers - Code of Practice: Part 1 Material, Loads and Design Strengths: Sec 2 Design Strengths (Fourth Revision)	October, 2021	-	Indigenous
44.	IS 802 (Part 2) : 1978 Reviewed In : 2022	Code of practice for use of structural steel in overhead transmission line towers: Part 2 fabrication galvanizing, inspection and packing	December, 2022	1	Indigenous
45.	IS 802 (Part 3) : 1978 Reviewed In : 2022	Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 3 Testing	December, 2022	-
46.	IS 802 (Part 4) : 2023	Use of Structural Steel in Overhead Transmission Line Towers - Code of Practice Part 4 Requirements for Latticed Switchyard Structures		-	Indigenous
47.	IS 802 (Part 6) : 2022	Use of Structural Steel in Overhead Transmission Line Towers — Code of Practice Part 6 Tower Erection		-	Indigenous
48.	IS 803 : 1976 Reviewed In : 2022 Reaffirmed but not taken up for revision	Code of Practice for Design, Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks (First Revision)	December, 2022	1
49.	IS 804 : 1967 Reviewed In : 2022 Reaffirmed but not taken up for revision	Specification for Rectangular Pressed Steel Tanks (First Revision)	December, 2022	2	Indigenous
50.	IS 805 : 1968 Reviewed In : 2022 Reaffirmed but not taken up for revision	Code of practice for use of steel in gravity water tanks	December, 2022	-	Indigenous
51.	IS 806 : 1968 Reviewed In : 2022	Code of Practice for Use of Steel Tubes in General Building Construction (First Revision)	December, 2022	1	Indigenous
52.	IS 808 : 2021	Hot Rolled Steel Beam, Column, Channel and Angle Sections — Dimensions and Properties (Fourth Revision)		-	Indigenous
53.	IS 8081 : 1976 Reviewed In : 2021 Reaffirmed but not taken up for revision	Specification for slotted sections	January, 2021	1	Indigenous
54.	IS 811 : 1987 Reviewed In : 2024	Specification for cold formed light gauge structural steel sections (Second Revision)	March, 2024	1	Indigenous
55.	IS 8147 : 1976 Reviewed In : 2021	Code of practice for use of aluminium alloys in structures	January, 2021	-	Indigenous
56.	IS 8640 : 1977 Reviewed In : 2021 Reaffirmed but not taken up for revision	Recommendations for dimensional parameters for industrial buildings	January, 2021	-	Indigenous
57.	IS 9964 (Part 1) : 1981 Reviewed In : 2021	Recommendations for maintenance and operation of petroleum storage tanks: Part 1 preparation of tank for safe entry and work	January, 2021	-	Indigenous
58.	IS 9964 (Part 2) : 1981 Reviewed In : 2021	Recommendations for maintenance and operation of petroleum storage tanks: Part 2 inspection	January, 2021	-	Indigenous

SI. No.	Doc No	TITLE
No Records Found

SI. No.	Doc No	TITLE
No Records Found

SI. No.	Doc No	TITLE
No Records Found

SI. No.	Doc No	TITLE
No Records Found

SI. No.	Doc No	TITLE
No Records Found

SI. No.	Doc No	TITLE
1	CED 7 (22216) Revision of: IS 1173:1978	Hot Rolled and Slit Steel Tee Bars Dimensions and Properties
2	CED 7 (22217) Revision of: IS 1252:1991	Hot Rolled Steel Sections for Shipbuilding Dimensions and Tolerances
3	CED 7 (22225) Revision of: IS 3908:1986	Aluminium Beam Channel and Angle Sections Dimensions and Properties
4	CED 7 (24910)	Use of structural steel in overhead transmission line towers - Code of practice Part 1 material loads and design strengths sec 2 Design strengths Fourth Revision Amendment - 1

Product:   20  Code of Practices :    19  Methods of Test :   0  Terminology :   0  Dimensions :   12  System Standard :   0  Safety Standard :   1  Others :    6  Service Specification :    0  Process Specification :    0  Unclassified :    0

SI. No.	IS No.	Title
1.	IS 1731 : 1971	Dimensions for steel flats for structural and general engineering purposes
2.	IS 2314 : 1986 Reviewed In : 2017	Steel Sheet Piling Sections
3.	SP 38 : 1987	Handbook of Typified Designs for Structures With Steel Roof Trusses With and Without Cranes Based on IS Codes
4.	SP 40 : 1987	Handbook on Structures With Steel Portal Frames Without Cranes
5.	SP 47 : 1988	Handbook on Structures with Steel Lattice Portal Frames Without Cranes
6.	SP 6-1 : 1964	Handbook for Structural Engineers - Part-1 Structural Steel Sections
7.	SP 6-2 : 1962	Handbook for Structural Engineers -Part-2 Steel Beams and Plate Girders
8.	SP 6-3 : 1962	Handbook on Structural Engineers - Part-3 Steel Columns and Struts
9.	SP 6-7 : 1972 Reviewed In : 2010	ISI Handbook for Structural Engineers - Part 7 Simple Welded Girders

SI. No.	IS No. & Year	Title
1.	IS 1173 : 1978 Reviewed In : 2024	Specfication for Hot Rolled and Slit Steel Tee Bars Second Revision
2.	IS 1863 : 1979 ISO 657-19 Reviewed In : 2024	Specification for Rolled Steel Bulb Flats First Revision
3.	IS 1864 : 1979 ISO 657-18 Reviewed In : 2024	Specification for Hot Rolled Steel 39 L 39 Sections for Ship Building First Revision
4.	IS 2314 (Part 1) : 2023	Steel Sheet Piling Section Specification Part 1 Hot Rolled Sheet Pile Second Revision
5.	IS 2314 (Part 2) : 2023	Steel Sheet Piling Section Specification Part 2 Cold Formed Sheet Pile Second Revision
6.	IS 2713 (Part 1 to 3) : 1980 Reviewed In : 2022	Tubular Steel Poles for Overhead Power Lines
7.	IS 2750 : 1964 Reviewed In : 2021	Specification for steel scaffoldings
8.	IS 3908 : 1986 Reviewed In : 2022	Specification for Aluminium Equal Leg Angles First Revision
9.	IS 3909 : 1986 Reviewed In : 2022	Specification for Aluminium Unequal Leg Angles First Revision
10.	IS 3921 : 1985 Reviewed In : 2021	Specification for Aluminium Channels First Revision
11.	IS 3964 : 1980 Reviewed In : 2021 Reaffirmed but not taken up for revision	Specifiacation for Light Rails First Revision
12.	IS 5384 : 1985 Reviewed In : 2021	Specification for Aluminium I-Beam First Revision
13.	IS 6445 : 1985 Reviewed In : 2021	Specification for Aluminium Tee - Sections First Revision
14.	IS 6449 : 1987 Reviewed In : 2024	Specification for Aluminium Bulb Angles for Marine Application First Revision
15.	IS 6475 : 1987 Reviewed In : 2024	Specification for Aluminium Tee bars for Marine Application First Revision
16.	IS 6476 : 1987 Reviewed In : 2024	Specification for Aluminium Bulb Plates for Marine Application First Revision
17.	IS 804 : 1967 Reviewed In : 2022 Reaffirmed but not taken up for revision	Specification for Rectangular Pressed Steel Tanks First Revision
18.	IS 8081 : 1976 Reviewed In : 2021 Reaffirmed but not taken up for revision	Specification for slotted sections
19.	IS 811 : 1987 Reviewed In : 2024	Specification for cold formed light gauge structural steel sections Second Revision