BUREAU OF INDIAN STANDARDS
Programme of Work
PGD25 : Engineering Metrology
- Scope : Formulation of standards on limits and fits and on gauges for plain and threaded work pieces; precision measuring equipment; surface finish and other allied items.
-
Liaison :ISO/TC 213/WG 10 - Coordinate measuring machines
ISO/TC 213/WG 4 - Uncertainty of measurement and decision rules
ISO TC 213/SC /WG - Dimensional and geometrical product specifications and verification - Participating (P)
ISO/TC 213 - Dimensional and geometrical product specifications and verification - Participating (P)
|
IS 10216 : 1988 ISO 228-2 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Pipe threads where pressure - Tight joints are not made on the threads - Verification by means of limit gauges (First Revision)
|
January, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 10275 : 1982 Reviewed In : 2022 |
Methods For Assessment of circularity Error From Polar Graphs Obtained By Using Stylus-Type Form-Measuring Instrument
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 10649 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for ring gauges for drill chuck taper arbors of morse taper and jacob taper type
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 10685 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range Above M120 up to and including M200)
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 11103 : 1984 Reviewed In : 2020 |
Specification for cylindrical measuring pins (Size Range From 0.1 mm up to and including 20 mm)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 11498 : 2023 |
Geometrical Product Specifications GPS Dimensional Measuring Equipment: Dial Test Indicators Lever Type Design and Metrological Characteristics
|
-
|
Modified/Technically Equivalent
|
||
|
IS 12257 (Part 1) : 1987 Reviewed In : 2022 |
Specification for pneumatic length measurement comparators: Part 1 general information on principles and methods
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 12257 (Part 2) : 1992 Reviewed In : 2022 |
Pneumatic measurement: Part 2 design features of instruments working in high pressure range
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12257 (Part 3) : 1992 Reviewed In : 2022 |
Pneumatic measurement: Part 3 parameters of instruments working on high pressure
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12257 (Part 4) : 1992 Reviewed In : 2022 |
Pneumatic measurement - Specification: Part 4 general information and examples of application
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12257 (Part 5) : 1996 Reviewed In : 2022 |
Pneumatic measurement: Part 5 glossary of terms and definition
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12937 : 1990 Reviewed In : 2024 |
Engineering metrology - Methods of testing straightness, flatness and perpendicularity
|
November, 2024
|
1
|
Indigenous
|
|
|
IS 13907 : 1994 ISO 7863 Reviewed In : 2020 |
Height setting micrometers and rising blocks - Specification
|
January, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 14271 : 1995 Reviewed In : 2020 |
Engineering metrology - Dial snap gauges - Specification
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 15261 : 2002 ISO 3274 Reviewed In : 2023 |
Geometrical product specifications (GPS) - surface texture : profile method - Nominal characteristics of contact (Stylus) instruments
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15264 : 2002 ISO 8785 Reviewed In : 2023 |
Geometrical product specification (GPS) - surface imperfections - Terms, definitions and parameters
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15371 (Part 1) : 2023 ISO 14253-1:2017 |
Geometrical product specifications (GPS) � Inspection by measurement of workpieces and measuring equipment: Part 1 Decision rules for verifying conformity or nonconformity with specifications (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15371 (Part 2) : 2018 ISO 14253-2 : 2011 Reviewed In : 2023 |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 2 guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (First Revision)
|
March, 2023
|
1
|
Identical under dual numbering
|
|
|
IS 15371 (Part 3) : 2018 ISO 14253-3 : 2011 Reviewed In : 2023 |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 3 guidelines for achieving agreements on measurement uncertainty statements (First Revision)
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15371 (Part 4) : 2018 ISO/TS 14253-4 ; 2010 Reviewed In : 2023 |
Geometrical Product Specifications (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment Part 4 Background on functional Limits and Specification Limits in Decision Rules
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15371 (Part 5) : 2023 ISO 14253-5:2015 |
Geometrical product specifications (GPS) � Inspection by measurement of workpieces and measuring equipment: Part 5 Uncertainty in verification testing of indicating measuring instruments
|
-
|
Identical under dual numbering
|
||
|
IS 15371 (Part 6) : 2018 14253-6 : 2012 Reviewed In : 2023 |
Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment Part 6 Generalized Decision Rules for the Acceptance and Rejection of Instruments and Workpieces
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15373 : 2003 ISO 4291 Reviewed In : 2023 |
Method for the assessment of departure from roundness - Measurement of variations in radius
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15374 : 2003 ISO 4292 Reviewed In : 2019 |
Methods for the assessment of departure from roundness - Measurement by twoand three - Point methods
|
February, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 15421 (Part 1) : 2003 ISO 13565-1 Reviewed In : 2023 |
Geometrical product specifications (GPS) - Surface texture: profile method - surfaces having stratified functional properties: Part 1 filtering and general measurement conditions
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15422 : 2003 ISO 12085 Reviewed In : 2023 |
Geoivietrical product specifications (GPS) - Surface texture: profile method - motif parameters
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15423 (Part 1) : 2003 ISO 5436-1 Reviewed In : 2023 |
Geometrical product specifications (GPS) - Surface texture: profile method measurement standards: Part 1 material measures
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15423 (Part 2) : 2024 ISO 5436-2:2012 |
Geometrical Product Specifications (GPS)— Surface Texture — Profile Method — Measurement Standards: Part 2 Software Measurement Standards (first revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15423 (Part 2) : 2003 ISO 5436-2 : 2001 Reviewed In : 2019 |
Geometrical product specifications (GPS) - Surface texture: profile method; measurement standards Part 2 software measurement standards
|
February, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 15635 (Part 1) : 2006 ISO 10360 -1 Reviewed In : 2022 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 1 vocabulary
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 15635 (Part 2) : 2014 ISO 10360-2 : 2009 Reviewed In : 2021 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 2 CMMs used for measuring linear dimensions (First Revision)
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 15635 (Part 3) : 2006 ISO 10360-3 Reviewed In : 2022 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 3 CMMs with the axis of a rotary table as the fourth axis
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 15635 (Part 5) : 2024 ISO 10360-5:2020 |
Geometrical product specification (GPS)-- Acceptance and reverification tests for coordinate measuring systems CMS: Part 5 CMMs using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (second revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15635 (Part 6) : 2006 ISO 10360-6 Reviewed In : 2021 |
Geometrical product specifications (GPS) - acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 estimation of errors in computing gaussian associated features
|
March, 2021
|
1
|
Identical under dual numbering
|
|
|
IS 15635 (Part 7) : 2019 17.040.30 Reviewed In : 2023 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 7 CMMs equipped with imaging probing systems
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15635 (Part 8) : 2019 ISO 10360-8 : 2013 Reviewed In : 2023 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 8 CMMs equipped with optical distance sensors
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15635 (Part 9) : 2019 ISO 10360-9 : 2013 Reviewed In : 2023 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 9 CMMs with multiple probing systems
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15635 (Part 10) : 2023 ISO 10360-10:2021 |
Geometrical product specifications (GPS) � Acceptance and reverification tests for coordinate measuring systems (CMS): Part 10 Laser trackers
|
-
|
Identical under dual numbering
|
||
|
IS 15635 (Part 12) : 2023 ISO 10360-12:2016 |
Geometrical product specifications (GPS) � Acceptance and reverification tests for coordinate measuring systems (CMS): Part 12 Articulated arm coordinate measurement machines (CMM)
|
-
|
Identical under dual numbering
|
||
|
IS 15759 : 2023 ISO 12179:2021 |
Geometrical Product Specifications (GPS) � Surface Texture: Profile Method � Calibration of Contact (Stylus) Instruments
|
-
|
Identical under dual numbering
|
||
|
IS 16224 (Part 1) : 2014 ISO 12780-1 : 2011 Reviewed In : 2024 |
Geometrical Product Specifications (GPS) - Straightness Part 1 Vocabulary and Parameters of Straightness
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16224 (Part 2) : 2014 ISO 12780-2 : 201 Reviewed In : 2024 |
Geometrical product specifications (GPS) - Straightness: Part 2 specification operators
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16225 (Part 1) : 2014 ISO 12180-1 : 2011 Reviewed In : 2024 |
Geometrical product specifications (GPS) - Cylindricity: Part 1 vocabulary and parameters of cylindrical form
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16225 (Part 2) : 2014 ISO 12180-2 : 2011 Reviewed In : 2024 |
Geometrical product specifications (GPS) - Cylindricity: Part 2 specification operators
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16226 (Part 1) : 2014 ISO 12181-1 : 2011 Reviewed In : 2024 |
Geometrical product specifications (GPS) - Roundness: Part 1 vocabulary and parameters of roundness
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16226 (Part 2) : 2014 ISO 12181-2 : 2011 Reviewed In : 2024 |
Geometrical product specifications (GPS) - Roundness: Part 2 specification operators
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16294 (Part 2) : 2016 ISO 12781-2 : 2011 Reviewed In : 2021 |
Geometrical product specifications (GPS) - Flatness: Part 2 specification operators
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 16300 : 2014 ISO/TR 16015 : 2003 Reviewed In : 2024 |
Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influence
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16491 (Part 1) : 2016 ISO 13385-1 : 2011 Reviewed In : 2021 |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 1 calipers; design and metrological characteristics
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 16491 (Part 1) : 2024 ISO 13385-1:2019 |
Geometrical product specifications (GPS) � Dimensional measuring equipment: Part 1 Design and metrological characteristics of callipers (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 16491 (Part 2) : 2016 ISO 13385-2 : 2011 Reviewed In : 2021 |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 2 caliper depth gauges; design and metrological characteristics
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 16748 : 2018 ISO 13102 : 2012 Reviewed In : 2023 |
Geometrical Product Specifications (GPS)-Dimensional Measuring Equipment Electronic Digital-Indicator Gauge-Design and Metrological Characteristics
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 18164 : 2023 ISO 14978:2018 |
Geometrical product specifications (GPS) � General concepts and requirements for GPS measuring equipment
|
-
|
Identical under dual numbering
|
||
|
IS 18180 (Part 1) : 2023 ISO 17450-1:2011 |
Geometrical product specifications (GPS) � General concepts: Part 1 Model for geometrical specification and verification
|
-
|
Identical under dual numbering
|
||
|
IS 18180 (Part 2) : 2023 ISO 17450-2:2012 |
Geometrical product specifications (GPS) � General concepts: Part 2 Basic tenets, specifications, operators, uncertainties and ambiguities
|
-
|
Identical under dual numbering
|
||
|
IS 18180 (Part 3) : 2023 ISO 17450-3:2016 |
Geometrical product specifications (GPS) � General concepts: Part 3 Toleranced features
|
-
|
Identical under dual numbering
|
||
|
IS 18180 (Part 4) : 2023 ISO 17450-4:2017 |
Geometrical product specifications (GPS) � Basic concepts: Part 4 Geometrical characteristics for quantifying GPS deviations
|
-
|
Identical under dual numbering
|
||
|
IS 18229 (Part 1) : 2023 ISO 14405-1:2016 |
Geometrical product specifications (GPS) � Dimensional tolerancing: Part 1 Linear sizes
|
-
|
Identical under dual numbering
|
||
|
IS 18229 (Part 2) : 2023 ISO 14405-2:2018 |
Geometrical product specifications (GPS) � Dimensional tolerancing: Part 2 Dimensions other than linear or angular sizes
|
-
|
Identical under dual numbering
|
||
|
IS 18229 (Part 3) : 2023 ISO 14405-3:2016 |
Geometrical product specifications (GPS) � Dimensional tolerancing: Part 3 Angular sizes
|
-
|
Identical under dual numbering
|
||
|
IS 18231 : 2023 ISO/TS 17863:2013 |
Geometrical product specification (GPS) � Tolerancing of moveable assemblies
|
-
|
Identical under dual numbering
|
||
|
IS 18332 : 2023 ISO/TS 17865:2016 |
Geometrical product specifications (GPS) � Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 1) : 2023 ISO 16610-1: 2015 |
Geometrical product specifications GPS Filtration: Part 1 Overview and basic concepts
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 20) : 2023 ISO 16610-20:2015 |
Geometrical product specifications GPS Filtration: Part 20 Linear profile filters: Basic concepts
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 21) : 2023 ISO 16610-21:2011 |
Geometrical product specifications GPS Filtration: Part 21 Linear profile filters: Gaussian filters
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 22) : 2024 ISO 16610-22:2015 |
Geometrical product specifications GPS Filtration: Part 22 Linear profile filters: Spline filters
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 28) : 2024 ISO 16610-28 : 2016 |
Geometrical product specifications GPS Filtration : Part 28 Profile filters: End effects
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 29) : 2024 ISO 16610-29 : 2020 |
Geometrical product specifications GPS Filtration : Part 29 Linear profile filters: wavelets
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 30) : 2024 ISO 16610-30 : 2015 |
Geometrical product specifications (GPS) -- Filtration :Part 30 Robust profile filters: Basic concepts
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 31) : 2023 ISO 16610-31:2016 |
Geometrical product specifications GPS Filtration: Part 31 Robust profile filters: Gaussian regression filters
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 40) : 2024 ISO 16610-40 : 2015 |
Geometrical product specifications (GPS) -- Filtration : Part 40 Morphological profile filters: Basic concepts
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 41) : 2024 ISO 16610-41: 2015 |
Geometrical product specifications (GPS) Filtration : Part 41 Morphological profile filters: Disk and horizontal line-segment filters
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 49) : 2024 ISO 16610-49 : 2015 |
Geometrical Product Specifications (GPS)-- Filtration : Part 49 Morphological profile filters: Scale space techniques
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 60) : 2024 ISO 16610-60 : 2015 |
Geometrical product specification GPS Filtration : Part 60 Linear areal filters Basic concepts
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 61) : 2024 ISO 16610-61 : 2015 |
Geometrical product specification (GPS)-- Filtration : Part 61 Linear areal filters -- Gaussian filters
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 62) : 2024 ISO 16610-62 : 2023 |
Geometrical product specifications (GPS) -- Filtration : Part 62 Linear areal filters: spline filters
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 71) : 2024 ISO 16610-71 : 2014 |
Geometrical product specifications (GPS)-- Filtration : Part 71 Robust areal filters: Gaussian regression filters
|
-
|
Identical under dual numbering
|
||
|
IS 18430 (Part 85) : 2024 16610-85 : 2013 |
Geometrical product specifications (GPS) -- Filtration : Part 85 Morphological areal filters: Segmentation
|
-
|
Identical under dual numbering
|
||
|
IS 18431 (Part 73) : 2023 ISO 25178-73:2019 |
Geometrical product specifications GPS Surface texture: Areal: Part 73 Terms and definitions for surface defects on material measures
|
-
|
Identical under dual numbering
|
||
|
IS 18432 (Part 2) : 2023 ISO 21920-2:2021 |
Geometrical product specifications (GPS) � Surface texture: Profile: Part 2 Terms, definitions and surface texture parameters
|
-
|
Identical under dual numbering
|
||
|
IS 18432 (Part 3) : 2023 ISO 21920-3:2021 |
Geometrical product specifications GPS Surface texture: Profile: Part 3 Specification operators
|
-
|
Identical under dual numbering
|
||
|
SP 19 : 1980 Reviewed In : 2021 |
Guidelines for classification of quality of scraped surfaces
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 2092 : 1983 Reviewed In : 2019 |
Specification for plunger type dial gauges (First Revision)
|
February, 2019
|
1
|
Not Equivalent
|
|
|
IS 2103 : 1980 Reviewed In : 2022 |
SPECIFICATION FOR ENGINEER - SQUARES ( Second Revision )
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2220 : 1990 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Engineering metrology - Steel straightedges - Specification (First Revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 2251 : 1986 Reviewed In : 2022 |
Specification for plug and ring gauges for self holding tapers (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2285 : 2003 ISO 8512-1 Reviewed In : 2024 |
Engineering metrology - Measuring equipment - Cast iron surface plates - Specification (Third Revision)
|
July, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 2334 : 2001 ISO 1502 Reviewed In : 2023 |
ISO general purpose metric screw threads - Gauges and gauging (Second Revision)
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 2554 : 1971 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for cast iron angle plates (First Revision)
|
January, 2020
|
1
|
Indigenous
|
|
|
IS 2921 : 2016 ISO 13225 : 2012 Reviewed In : 2021 |
Geometrical product specifications (GPS) - Dimensional measuring equipment; height gauges - Design and metrological characteristics (Second Revision)
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2949 : 1992 Reviewed In : 2022 |
Engineering metrology - Plain V - Blocks for inspection purposes - Specification (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2966 : 1964 Reviewed In : 2019 |
Specification for internal micrometers (Including Stick Micrometers)
|
February, 2019
|
1
|
Indigenous
|
|
|
IS 2967 : 1983 Reviewed In : 2019 |
Specification for external micrometer (First Revision)
|
February, 2019
|
-
|
Not Equivalent
|
|
|
IS 2984 : 2003 ISO 3650 Reviewed In : 2019 |
Slip gauges - Specification [ISO title : geometrical product specifications (GPS) - length standards : gauge blocks] (Second Revision)
|
February, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 3073 : 1967 Reviewed In : 2021 |
Assessment of surface roughness
|
March, 2021
|
4
|
Indigenous
|
|
|
IS 3179 : 1990 Reviewed In : 2020 |
Engineering metrology - Feeler gauges (second revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 3179 : 2024 |
Feeler Gauges — Specification (third revision)
|
-
|
Indigenous
|
||
|
IS 3455 : 1971 Reviewed In : 2020 |
Gauging practice for plain workpieces (First Revision)
|
January, 2020
|
4
|
Not Equivalent
|
|
|
IS 3455 (Part 1) : 1985 Reviewed In : 2020 |
Gauging practice for plain workpieces: Part 1 inspection of plain workpieces with indicative measuring instruments
|
January, 2020
|
1
|
Not Equivalent
|
|
|
IS 3485 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for plain and master setting ring gauges (Size Range From 1 Up To And Including 315 Mm) (Second Revision)
|
February, 2019
|
1
|
Indigenous
|
|
|
IS 3510 : 1990 Reviewed In : 2020 |
Engineering Metrology - Toolmaker Flats - Specification ( First Revision )
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 3512 : 1966 Reviewed In : 2019 |
Specification for Toolmakers Straightedges
|
February, 2019
|
1
|
Indigenous
|
|
|
IS 4210 : 1967 Reviewed In : 2024 |
Specification for strip feeler gauges for electrical purposes
|
November, 2024
|
1
|
Indigenous
|
|
|
IS 4211 : 1993 Reviewed In : 2019 |
Gauges - Thread pitch gauges for ISO metric screw threads (Pitch Range 0.4 To 6 Mm) - Specification (First Revision)
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 4239 : 2023 |
Bevel protractors -- Specification (second revision)
|
-
|
Indigenous
|
||
|
IS 4241 : 1990 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Engineering metrology - Engineer Parallels - Specification ( First Revision )
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 4349 : 1987 Reviewed In : 2024 |
Specification for cylindrical setting masters (First Revision)
|
November, 2024
|
-
|
Indigenous
|
|
|
IS 4440 : 1996 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Engineering metrology - Precision equipment - Slip gauge accessories (First Revision)
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 4492 : 1968 IEC 153-1 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for welded V - Blocks (Diameter Range 300 To 2000 Mm)
|
February, 2019
|
1
|
Indigenous
|
|
|
IS 4563 : 1987 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for block squares (First Revision)
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 4960 : 1968 Reviewed In : 2020 |
Specification for universal and elongated type V - Blocks
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 4966 (Part 1) : 1969 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauges for serrations: Part 1 for gauging external serrations
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 4966 (Part 2) : 1969 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauges for serrations: Part 2 for gauging internal serrations
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 5268 (Part 1) : 1991 Reviewed In : 2022 |
Engineering metrology - Straightedges: Part 1 cast iron straightedges (bow shaped or camel back type and 1-Section or parallel type) (First Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 5273 : 1969 Reviewed In : 2019 |
Specification for radius gauges
|
February, 2019
|
2
|
Indigenous
|
|
|
IS 5359 : 1987 Reviewed In : 2019 |
Specification for sine bars (First Revision)
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 5388 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for hexagon handles for plain and threaded plug gauges (Second Revision)
|
February, 2019
|
1
|
Indigenous
|
|
|
IS 5440 : 1969 Reviewed In : 2020 |
Specification for optical flats
|
January, 2020
|
1
|
Indigenous
|
|
|
IS 5939 : 1970 Reviewed In : 2022 |
Specification for single angle sine tables
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 5943 : 1970 Reviewed In : 2022 |
Specification for compound angle sine tables
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 5979 : 1981 Reviewed In : 2022 |
Specification for sine centres (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 5980 : 1978 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for bench centres (Firsf Revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 6137 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision)
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 6150 : 1971 Reviewed In : 2019 |
Specification for ISO metric screw thread measuring prisms
|
February, 2019
|
1
|
Indigenous
|
|
|
IS 6231 : 1971 Reviewed In : 2019 |
Specification for prismatic angle gauges
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 6232 : 1971 Reviewed In : 2019 |
Specification for cast iron box angle plates
|
February, 2019
|
1
|
Indigenous
|
|
|
IS 6244 : 1980 Reviewed In : 2022 |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 40 To 120 mm) (First Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 6246 : 1980 Reviewed In : 2022 |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 120 Up To And Including 250 mm) (First Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 6311 : 1978 Reviewed In : 2020 |
Specification for ISO metric screwthread measuring cylinders (First Revision)
|
January, 2020
|
1
|
Indigenous
|
|
|
IS 6952 : 1990 Reviewed In : 2022 |
Engineering metrology - Cylindrical squares - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 6973 : 1973 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for precision angle plates
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 6985 : 1973 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for precision box angle plates
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 6987 : 1973 Reviewed In : 2020 |
Specification for steel precision polygons
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 7014 : 1973 Reviewed In : 2020 |
Specification for length bars
|
January, 2020
|
1
|
Indigenous
|
|
|
IS 7018 (Part 1) : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Technical supply conditions for gauges: part 1 general (First Revision)
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 7018 (Part 2) : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision)
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 7018 (Part 3) : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Technical supply conditions for gauges: Part 3 assembly and identification of screw plug gauges for ISO metric screw threads (Size Range Form M1 Upto And Including M200) (First Revision)
|
February, 2019
|
1
|
Indigenous
|
|
|
IS 7327 : 2003 ISO 8512-2 Reviewed In : 2023 |
Engineering metrology - Measuring equipment - Granite surface plates - Specification (Second Revision)
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 7599 (Part 1) : 1975 Reviewed In : 2022 |
General requirements for engineer's comparators with stands:Part I engineer's comparators
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 7599 (Part 2) : 1975 Reviewed In : 2022 |
General Requirements for Engineer's Comparators With Stand - Part II : Comparator Standard
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 7604 : 1975 Reviewed In : 2022 |
Specification for length bar accessories
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 7606 : 1982 Reviewed In : 2022 |
Specification for plain adjustable snap gauges (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 7859 : 1975 Reviewed In : 2020 |
Gauge allowances and manufacturing tolerances for plain gauges for inside measurements for ISO fit sizes (Nominal Size Up To 500 mm)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 7876 : 1975 Reviewed In : 2020 |
Gauge allowances and manufacturing tolerances for plain gauges for outside measurements for ISO fit sizes (Nominal Size Up To 500 mm)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 8023 : 1991 Reviewed In : 2020 |
Gauges - Single ended progressive type plate snap gauges (Up to 160 mm) - Specification (First Revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 8823 : 1978 Reviewed In : 2020 |
Specification for triangular straightedges
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 8999 : 2003 ISO 7-2 Reviewed In : 2023 |
Pipe threads where pressure - Tight joints are made on the threads - Verification by means of limit gauges (First Revision)
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 9475 : 1986 Reviewed In : 2022 |
Specification for plug and ring gauges for self release 7/24 tapers (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 9483 : 1993 Reviewed In : 2020 |
Measuring instruments - Micrometer heads - Specification (First Revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 9529 : 1980 Reviewed In : 2022 |
Specification for taper plug gauges and taper ring gauges to check taper bore of gauge handles and taper shanks of gauging members
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 9608 : 1985 Reviewed In : 2020 |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size range above M40 up to and Including M120) (First Revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 9610 : 1985 Reviewed In : 2020 |
Specification for go and no go screw ring gauges for ISO metric screw threads (Size range from M1 up to and including M100) (First Revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 9631 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range From M1 up to and Including M40) (First Revision)
|
February, 2019
|
1
|
Indigenous
|
|
|
IS/ISO/IEC GUIDE 99 : 2007 ISO/IEC Guide 99:2007 Reviewed In : 2022 |
International vocabulary of metrology � Basic and general concepts and associated terms (VIM)
|
March, 2022
|
-
|
Identical under single numbering
|
|
PGD 25 (26960)
Revision of: IS 5359:1987 |
Sine Bars -- Specifications Second Revision |
|
PGD 25 (26360)
Revision of: IS 6232:1971 |
Cast Iron Box Angle Plates Specification |
|
|
PGD 25 (26370)
Revision of: IS 6231:1971 |
Prismatic Angle Gauges Specification First Revision |
PGD 25 (25479) Revision of: IS 4211:1993 |
Gauges -- Thread Pitch Gauges for ISO Metric Screw Threads Pitch Range 0 4 To 6 mm -- Specification Second Revision |
|
PGD 25 (26553) Revision of: IS 2092:1983 |
Geometrical Product Specifications GPS -- Dimensional Measuring Equipment -- Design and Metrological Characteristics of Mechanical Dial Gauges |
| No Records Found | ||
PGD 25 (25385)
|
Geometrical product specifications GPS Filtration Part 32 Robust profile filters Spline filters |
| No Records Found |
|
|
IS/ISO 10360-2 : 1994 Reviewed In : 2017 |
Coordinate Metrology - Part 2 Performance Assessment of Coordinate Measuring Machines |
|
|
IS 10707 : 1983 Reviewed In : 2008 |
Instruments for Measurement of Surface Roughness by Profile Method |
|
|
IS 11689 : 1986 |
Gauging practice for straight sided splines for general engineering use |
|
|
IS 11703 (Part 1) : 1986 |
Gauges For Straight Sided Splines For General Engineering Use Part 1 Plug Gauges |
|
|
IS 11703 (Part 2) : 1986 |
Gauges For Straight Sided Splines For General Engineering Use Part 2 Ring Gauges |
|
|
IS 15262 : 2002 ISO 4287 Reviewed In : 2019 |
Geometrical product specifications GPS - surface texture profile method - Terms definitions and surface texture parameters |
|
|
IS 15263 : 2002 ISO 4288 Reviewed In : 2019 |
Geometrical product specifications GPS - surface texture profile method - Rules and procedures for the assessment of surface texture |
|
|
IS 15372 : 2003 ISO 6318 Reviewed In : 2019 |
Measurement of roundness - Terms definitions and parameters of roundness |
|
|
IS 15375 : 2003 ISO 11562 Reviewed In : 2019 |
Geometrical product specifications GPS - surface texture profile method - Metrological characteristics of phase correct filters |
|
|
IS 15421 (Part 2) : 2003 ISO 13565-2 Reviewed In : 2019 |
Geometrical product specifications GPS - Surface texture profile method - Surfaces having stratified functional properties Part 2 height characterization using the linear material ratio curve |
|
|
IS 15421 (Part 3) : 2003 ISO 13565-3 Reviewed In : 2019 |
Geometrical product specifications GPS - Surface texture profile method - surfaces having stratified functional properties Part 3 height characterization using the material probability curve |
|
|
IS 15635 (Part 4) : 2006 ISO 10360-4 Reviewed In : 2017 |
Geometrical Product Specifications GPS - Acceptance And Reverification Tests For Coordinate Measuring Machines CMM Part 4 CMMs Used In Scanning Measuring Mode |
|
|
IS 2306 : 1963 |
Dimensions for gauge limits for ISO metric screw thread 1 6 to 39 mm |
|
|
IS 3477 : 1973 |
GO and NO GO snap gauges for size range 3 to 250 mm |
|
|
IS 3484 : 1966 |
Plain Plug Gauges |
|
|
IS 3651 (Part 1) : 1982 Reviewed In : 2014 |
Specification for Vernier Calipers - Part I Vernier Calipers with Least Count 0 1 mm and 0 05 mm Second Revision |
|
|
IS 3651 (Part 2) : 1985 Reviewed In : 2014 |
Specification for Vernier Callipers - Part 2 Vernier Callipers with Least Count 0 02 mm |
|
|
IS 3651 (Part 3) : 1988 Reviewed In : 2013 |
Specification for Vernier Callipers - Part 3 Vernier Callipers with Least Count 0 1 mm measuring range above 1000 mm up to and including 4000 mm |
|
|
IS 4019 : 1967 |
Firm-joint Dividers |
|
|
IS 4052 : 1983 |
Spring Callipers |
|
|
IS 4083 : 1967 |
Spring Dividers |
|
|
IS 4189 : 1967 |
Firm-joint Inside and Outside Calipers |
|
|
IS 4213 : 1991 Reviewed In : 2014 |
Engineering metrology - Vernier depth gagues upto 300 mm - Specification First Revision |
|
|
IS 4290 (Part 1) : 1992 |
Roughness Comparison Specimens - Part 1 Turned Ground Bored Milled Shaped and Planed |
|
|
IS 4290 (Part 2) : 1992 |
Roughness comparison specimens Part 2 Spark-eroded shot-blasted and grit blasted and polished |
|
|
IS 4290 (Part 3) : 1992 |
Roughness comparison specimens Part 3 Cast surfaces |
|
|
IS 4583 : 1968 |
Plate Snap Gauges |
|
|
IS 5049 : 1969 Reviewed In : 1988 |
Gauge For Wire Diameters |
|
|
IS 5812 : 1970 Reviewed In : 2019 |
Specification for optical bevel protractors |
|
|
IS 6138 : 1971 |
Gauging members for plain plug gauges NO GO member dia range 1 to 30 mm |
|
|
IS 6245 : 1971 |
Gauging members for plain plug gauges NO GO members size range 30 to 100 mm |
|
|
IS 6247 : 1971 |
Gauging members for plain plug gauges NO GO members size range 100 to 250 mm |
|
|
IS 6633 : 1972 |
NO GO plain ring gauges size range 1 to 315 mm |
|
|
IS 8378 : 1987 Reviewed In : 2019 |
Vocabulary for basic and general terms in dimensional metrology First Revision |
|
|
IS 9112 : 1979 |
Screw thread micrometers |
|
IS 10649 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for ring gauges for drill chuck taper arbors of morse taper and jacob taper type |
|
|
IS 10685 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads Size Range Above M120 up to and including M200 |
|
|
IS 11103 : 1984 Reviewed In : 2020 |
Specification for cylindrical measuring pins Size Range From 0 1 mm up to and including 20 mm |
|
|
IS 11498 : 2023 |
Geometrical Product Specifications GPS Dimensional Measuring Equipment Dial Test Indicators Lever Type Design and Metrological Characteristics |
|
|
IS 12257 (Part 1) : 1987 Reviewed In : 2022 |
Specification for pneumatic length measurement comparators Part 1 general information on principles and methods |
|
|
IS 12257 (Part 2) : 1992 Reviewed In : 2022 |
Pneumatic measurement Part 2 design features of instruments working in high pressure range |
|
|
IS 12257 (Part 3) : 1992 Reviewed In : 2022 |
Pneumatic measurement Part 3 parameters of instruments working on high pressure |
|
|
IS 12257 (Part 4) : 1992 Reviewed In : 2022 |
Pneumatic measurement - Specification Part 4 general information and examples of application |
|
|
IS 13907 : 1994 ISO 7863 Reviewed In : 2020 |
Height setting micrometers and rising blocks - Specification |
|
|
IS 14271 : 1995 Reviewed In : 2020 |
Engineering metrology - Dial snap gauges - Specification |
|
|
IS 16491 (Part 1) : 2024 ISO 13385-1:2019 |
Geometrical product specifications GPS Dimensional measuring equipment Part 1 Design and metrological characteristics of callipers First Revision |
|
|
IS 2092 : 1983 Reviewed In : 2019 |
Specification for plunger type dial gauges First Revision |
|
|
IS 2103 : 1980 Reviewed In : 2022 |
SPECIFICATION FOR ENGINEER - SQUARES Second Revision |
|
|
IS 2220 : 1990 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Engineering metrology - Steel straightedges - Specification First Revision |
|
|
IS 2251 : 1986 Reviewed In : 2022 |
Specification for plug and ring gauges for self holding tapers First Revision |
|
|
IS 2285 : 2003 ISO 8512-1 Reviewed In : 2024 |
Engineering metrology - Measuring equipment - Cast iron surface plates - Specification Third Revision |
|
|
IS 2334 : 2001 ISO 1502 Reviewed In : 2023 |
ISO general purpose metric screw threads - Gauges and gauging Second Revision |
|
|
IS 2554 : 1971 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for cast iron angle plates First Revision |
|
|
IS 2921 : 2016 ISO 13225 : 2012 Reviewed In : 2021 |
Geometrical product specifications GPS - Dimensional measuring equipment height gauges - Design and metrological characteristics Second Revision |
|
|
IS 2949 : 1992 Reviewed In : 2022 |
Engineering metrology - Plain V - Blocks for inspection purposes - Specification Second Revision |
|
|
IS 2966 : 1964 Reviewed In : 2019 |
Specification for internal micrometers Including Stick Micrometers |
|
|
IS 2967 : 1983 Reviewed In : 2019 |
Specification for external micrometer First Revision |
|
|
IS 2984 : 2003 ISO 3650 Reviewed In : 2019 |
Slip gauges - Specification ISO title geometrical product specifications GPS - length standards gauge blocks Second Revision |
|
|
IS 3179 : 2024 |
Feeler Gauges Specification third revision |
|
|
IS 3485 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for plain and master setting ring gauges Size Range From 1 Up To And Including 315 Mm Second Revision |
|
|
IS 3510 : 1990 Reviewed In : 2020 |
Engineering Metrology - Toolmaker Flats - Specification First Revision |
|
|
IS 3512 : 1966 Reviewed In : 2019 |
Specification for Toolmakers Straightedges |
|
|
IS 4210 : 1967 Reviewed In : 2024 |
Specification for strip feeler gauges for electrical purposes |
|
|
IS 4211 : 1993 Reviewed In : 2019 |
Gauges - Thread pitch gauges for ISO metric screw threads Pitch Range 0 4 To 6 Mm - Specification First Revision |
|
|
IS 4239 : 2023 |
Bevel protractors -- Specification second revision |
|
|
IS 4241 : 1990 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Engineering metrology - Engineer Parallels - Specification First Revision |
|
|
IS 4349 : 1987 Reviewed In : 2024 |
Specification for cylindrical setting masters First Revision |
|
|
IS 4440 : 1996 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Engineering metrology - Precision equipment - Slip gauge accessories First Revision |
|
|
IS 4492 : 1968 IEC 153-1 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for welded V - Blocks Diameter Range 300 To 2000 Mm |
|
|
IS 4563 : 1987 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for block squares First Revision |
|
|
IS 4960 : 1968 Reviewed In : 2020 |
Specification for universal and elongated type V - Blocks |
|
|
IS 4966 (Part 1) : 1969 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauges for serrations Part 1 for gauging external serrations |
|
|
IS 4966 (Part 2) : 1969 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauges for serrations Part 2 for gauging internal serrations |
|
|
IS 5268 (Part 1) : 1991 Reviewed In : 2022 |
Engineering metrology - Straightedges Part 1 cast iron straightedges bow shaped or camel back type and 1-Section or parallel type First Revision |
|
|
IS 5273 : 1969 Reviewed In : 2019 |
Specification for radius gauges |
|
|
IS 5359 : 1987 Reviewed In : 2019 |
Specification for sine bars First Revision |
|
|
IS 5388 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for hexagon handles for plain and threaded plug gauges Second Revision |
|
|
IS 5440 : 1969 Reviewed In : 2020 |
Specification for optical flats |
|
|
IS 5939 : 1970 Reviewed In : 2022 |
Specification for single angle sine tables |
|
|
IS 5943 : 1970 Reviewed In : 2022 |
Specification for compound angle sine tables |
|
|
IS 5979 : 1981 Reviewed In : 2022 |
Specification for sine centres First Revision |
|
|
IS 5980 : 1978 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for bench centres Firsf Revision |
|
|
IS 6137 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauging members for plain plug gauges go and no go members Size Range From 1 Up to and Including 40 Mm Second Revision |
|
|
IS 6150 : 1971 Reviewed In : 2019 |
Specification for ISO metric screw thread measuring prisms |
|
|
IS 6231 : 1971 Reviewed In : 2019 |
Specification for prismatic angle gauges |
|
|
IS 6232 : 1971 Reviewed In : 2019 |
Specification for cast iron box angle plates |
|
|
IS 6244 : 1980 Reviewed In : 2022 |
Specification for gauging members for plain plug gauges go and no go members Size Range Above 40 To 120 mm First Revision |
|
|
IS 6246 : 1980 Reviewed In : 2022 |
Specification for gauging members for plain plug gauges go and no go members Size Range Above 120 Up To And Including 250 mm First Revision |
|
|
IS 6311 : 1978 Reviewed In : 2020 |
Specification for ISO metric screwthread measuring cylinders First Revision |
|
|
IS 6952 : 1990 Reviewed In : 2022 |
Engineering metrology - Cylindrical squares - Specification First Revision |
|
|
IS 6973 : 1973 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for precision angle plates |
|
|
IS 6985 : 1973 Reviewed In : 2020 Reaffirmed but not taken up for revision |
Specification for precision box angle plates |
|
|
IS 6987 : 1973 Reviewed In : 2020 |
Specification for steel precision polygons |
|
|
IS 7014 : 1973 Reviewed In : 2020 |
Specification for length bars |
|
|
IS 7327 : 2003 ISO 8512-2 Reviewed In : 2023 |
Engineering metrology - Measuring equipment - Granite surface plates - Specification Second Revision |
|
|
IS 7599 (Part 1) : 1975 Reviewed In : 2022 |
General requirements for engineer s comparators with stands Part I engineer s comparators |
|
|
IS 7599 (Part 2) : 1975 Reviewed In : 2022 |
General Requirements for Engineer s Comparators With Stand - Part II Comparator Standard |
|
|
IS 7604 : 1975 Reviewed In : 2022 |
Specification for length bar accessories |
|
|
IS 7606 : 1982 Reviewed In : 2022 |
Specification for plain adjustable snap gauges First Revision |
|
|
IS 8023 : 1991 Reviewed In : 2020 |
Gauges - Single ended progressive type plate snap gauges Up to 160 mm - Specification First Revision |
|
|
IS 8823 : 1978 Reviewed In : 2020 |
Specification for triangular straightedges |
|
|
IS 9475 : 1986 Reviewed In : 2022 |
Specification for plug and ring gauges for self release 7 24 tapers First Revision |
|
|
IS 9483 : 1993 Reviewed In : 2020 |
Measuring instruments - Micrometer heads - Specification First Revision |
|
|
IS 9529 : 1980 Reviewed In : 2022 |
Specification for taper plug gauges and taper ring gauges to check taper bore of gauge handles and taper shanks of gauging members |
|
|
IS 9608 : 1985 Reviewed In : 2020 |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads Size range above M40 up to and Including M120 First Revision |
|
|
IS 9610 : 1985 Reviewed In : 2020 |
Specification for go and no go screw ring gauges for ISO metric screw threads Size range from M1 up to and including M100 First Revision |
|
|
IS 9631 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads Size Range From M1 up to and Including M40 First Revision |