Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Production and General Engineering Department

Programme of Work




PGD18 : Industrial Automation Systems And Robotics


  • Scope : a) Standardization in the field of industrial automation systems and integration concerning discrete part manufacturing and encompassing the application of multiple technologies i.e. information systems, machines, equipment communication (Bus communication, telecommunication etc. excluded): - Process automation; - Electrical electronics equipment; - Programmable logical controllers for general application; - Sensors. b) Standardization in the field of Robotics.
  • Liaison :
    ISO/TC 184 - Automation systems and integration - Participating (P)
    ISO/TC 184/SC 1 - Industrial cyber and physical device control - Participating (P)
    ISO/TC 184/SC 4 - Industrial data - Participating (P)
    ISO/TC 184/SC 4/WG 3 - Oil, Gas, Process and Power
    ISO/TC 184/SC 5 - Interoperability, integration, and architectures for enterprise systems and automation applications - Participating (P)
    ISO/TC 184/SC 5/WG 12 - Convergence of informatization and industrialization
    ISO/TC 184/SC 5/WG 15 - Model-based standards authoring
    ISO/TC 184/SC 5/WG 9 - Key performance indicators for manufacturing operations management
    ISO/TC 299 - Robotics - Participating (P)
    ISO/TC 299/JWG 5 - Joint ISO/TC 299 - IEC/SC 62A - IEC/SC 62D WG: Medical robot safety
    ISO/TC 299/WG 3 - Industrial safety
    ISO/TC 299/WG 4 - Service robot performance
    ISO/TC 299/WG 6 - Modularity for service robots

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS/ISO 10303-1 : 2021
ISO 10303-1 : 2021
Industrial automation systems and integration -- Product data representation and exchange: Part 1 Overview and fundamental principles
-
Identical under single numbering
2.
 IS 13450 (Part 4/Sec 1) : 2020
IEC TR 60601-4-1 : 2017
Medical electrical equipment: Part 4 Guidance and interpretation: Section 1 Medical electrical equipment and medical electrical systems employing a degree of autonomy
-
Identical under dual numbering
3.
 IS 13547 (Part 1) : 2010
Reviewed In : 2020
Manipulating industrial robots -- Mechanical interfaces: Part 1 Plates (second revision)
February, 2020
-
Identical under dual numbering
4.
 IS 13547 (Part 2) : 2010
Reviewed In : 2020
Manipulating industrial robots -- Mechanical interfaces: Part 2 Shafts (first revision)
February, 2020
-
Identical under dual numbering
5.
 IS/ISO 13584-1 : 2001
ISO 13584-1 : 2001
Reviewed In : 2021
Industrial automation systems and integration -- Parts library: Part 1 Overview and fundamental principles
April, 2021
-
Identical under single numbering
6.
 IS 14530 (Part 1) : 2019
ISO 10218-1 : 2011
Robots and robotic devices -- Safety requirements for industrial robots: Part 1 Robots (first revision)
-
Identical under dual numbering
7.
 IS 14530 (Part 2) : 2019
ISO 10218-2 : 2011
Robots and robotic devices -- Safety requirements for industrial robots: Part 2 Robot systems and integration (first revision)
-
Identical under dual numbering
8.
 IS 14531 : 2005
ISO 9946
Reviewed In : 2020
Manipulating industrial robots -- Presentation of characteristics (first revision)
February, 2020
-
Identical under dual numbering
9.
 IS 14533 : 2005
ISO 9283
Reviewed In : 2020
Manipulating industrial robots -- Performance criteria and related test methods (first revision)
February, 2020
-
Identical under dual numbering
10.
 IS 14662 : 2024
ISO 8373 : 2021
Robotics Vocabulary
-
Identical under dual numbering
11.
 IS 14663 : 2018
ISO 9787 : 2013
Reviewed In : 2023
Robots and robotic devices -- Coordinate systems and motion nomenclatures (first revision)
January, 2023
-
Identical under dual numbering
12.
 IS 14776 (Part 1) : 2000
ISO/TR 10314-1
Reviewed In : 2020
Industrial automation -- Shop floor production: Part 1 Reference model for standardization and a methodology for identification of requirements
February, 2020
-
Identical under dual numbering
13.
 IS 14776 (Part 2) : 2000
ISO/TR 10314-2
Reviewed In : 2020
Industrial automation -- Shop floor production: Part 2 Application of the reference model for standardization and methodology
February, 2020
-
Identical under dual numbering
14.
 IS 15034 : 2001
ISO/TR 13309
Reviewed In : 2023
Manipulating industrial robots -- Informative guide on test equipment and metrology methods of operation for robot performance evaluation in accordance with is 14533:1998
January, 2023
-
Identical under dual numbering
15.
 IS 15291 : 2024
ISO 11593 : 2022
Robots for industrial environments -- Automatic end effector exchange systems -- Vocabulary (first revision)
-
Identical under dual numbering
16.
 IS 15292 : 2003
ISO 15187
Reviewed In : 2013
Manipulating industrial robots -- Graphical user interfaces for programming and operation of robots (GUI-R)
-
Identical under dual numbering
17.
 IS 15296 : 2017
ISO 11161
Reviewed In : 2022
Safety of machinery -- Integrated manufacturing systems -- Basic requirements (first revision)
January, 2022
-
Identical under dual numbering
18.
 IS/ISO 15531-1 : 2004
ISO 15531-1 : 2004
Reviewed In : 2023
Industrial automation systems and integration -- Industrial manufacturing management data: Part 1 General overview
January, 2023
-
Identical under dual numbering
19.
 IS/ISO 15531-31 : 2004
ISO 15531-31 : 2004
Reviewed In : 2023
Industrial automation systems and integration -- Industrial manufacturing management data: Part 31 Resource information model
January, 2023
-
Identical under single numbering
20.
 IS/ISO 15531-32 : 2005
ISO 15531-32 : 2005
Reviewed In : 2023
Industrial automation systems and integration - Industrial manufacturing management data : resources usage management: Part 32 conceptual model for resources usage management data
January, 2023
-
Identical under single numbering
21.
 IS/ISO 15531-42 : 2005
ISO 15531-42 : 2005
Reviewed In : 2023
Industrial automation systems and integration - Industrial manufacturing management data: Part 42 time model
January, 2023
-
Identical under single numbering
22.
 IS/ISO 15531-43 : 2006
ISO 15531-43 : 2006
Reviewed In : 2023
Industrial Automation Systems and Integration Industrial Manufacturing Management Data Part 43 Manufacturing Flow Management Data : Data Model for Flow Monitoring and Manufacturing Data Exchange
January, 2023
-
Identical under single numbering
23.
 IS 15571 : 2005
ISO/TR 11065
Reviewed In : 2023
Industrial automation glossary
January, 2023
-
Identical under dual numbering
24.
 IS 16492 : 2017
ISO 14539 : 2000
Reviewed In : 2021
Manipulating industrial robots - Object handling with grasp - Type grippers - Vocabulary and presentation of characteristics
April, 2021
-
Identical under dual numbering
25.
 IS 16530 (Part 1) : 2016
ISO 16100-1 : 2009
Reviewed In : 2021
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability: Part 1 framework
April, 2021
-
Identical under dual numbering
26.
 IS 16530 (Part 2) : 2016
ISO 16100 - 2 :2003
Reviewed In : 2021
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability part 2 profiling methodology
April, 2021
-
Identical under dual numbering
27.
 IS 16530 (Part 3) : 2017
ISO 16100-3 : 2005
Reviewed In : 2021
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability: Part 3 interface services, protocols and capability templates
April, 2021
-
Identical under dual numbering
28.
 IS 16530 (Part 4) : 2016
ISO 16100 4 : 2006
Reviewed In : 2021
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability: Part 4 conformance test methods, criteria and reports
April, 2021
-
Identical under dual numbering
29.
 IS 16608 : 2018
ISO 13482
Reviewed In : 2024
Robots and robotic devices - Safety requirements for personal care robots
March, 2024
-
Identical under dual numbering
30.
 IS 17192 (Part 1) : 2019
ISO 18646-1 : 2016
Reviewed In : 2023
Robotics — Performance Criteria and Related Test Methods for Service Robots Part 1 Locomotion for Wheeled Robots
August, 2023
-
Identical under dual numbering
31.
 IS 17192 (Part 2) : 2020
ISO 18646-2 : 2019
Robotics — Performance Criteria and Related Test Methods for Service Robots Part 2 Navigation
-
Identical under dual numbering
32.
 IS 17192 (Part 2) : 2024
ISO 18646-2 : 2024
Robotics Performance criteria and related test methods for service robots Part 2: Navigation (first revision)
-
Identical under dual numbering
33.
 IS 17192 (Part 4) : 2023
ISO 18646-4 : 2021
Robotics Performance criteria and related test methods for service robots Part 4: Lower-back support robots
-
Identical under dual numbering
34.
 IS 17193 : 2019
ISO/TS 15066 ; 2016
Reviewed In : 2023
Robots and Robotic Devices — Collaborative Robots
August, 2023
-
Identical under dual numbering
35.
 IS 17437 : 2020
ISO 19649 : 2017
Mobile Robots — Vocabulary
-
Identical under single numbering
36.
 IS 17691 (Part 1) : 2021
ISO/TR 20218-1:2018
ROBOTICS SAFETY DESIGN FOR INDUSTRIAL ROBOT SYSTEMS PART 1: END-EFFECTORS
-
Identical under single numbering
37.
 IS 17691 (Part 2) : 2021
ISO/TR 20218-2:2017
ROBOTICS SAFETY DESIGN FOR INDUSTRIAL ROBOT SYSTEMS PART 2: MANUAL LOADUNLOAD STATIONS
-
Identical under single numbering
38.
 IS 17885 (Part 1) : 2022
ISO 23247-1 : 2021
Automation systems and integration Digital twin framework for manufacturing Part 1: Overview and general principles
-
Identical under dual numbering
39.
 IS 17885 (Part 2) : 2022
ISO 23247-2 : 2021
Automation systems and integration Digital twin framework for manufacturing Part 2: Reference architecture
-
Identical under dual numbering
40.
 IS 17885 (Part 3) : 2022
ISO 23247-3 : 2021
Automation systems and integration Digital twin framework for manufacturing Part 3: Digital representation of manufacturing elements
-
Identical under dual numbering
41.
 IS 17885 (Part 4) : 2022
ISO 23247-4 : 2021
Automation systems and integration Digital twin framework for manufacturing Part 4 : Information exchange
-
Identical under dual numbering
42.
 IS/ISO 20140-1 : 2019
ISO 20140-1 : 2019
Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 1: Overview and general principles
-
Identical under single numbering
43.
 IS/ISO 20140-2 : 2018
ISO 20140-2 : 2018
Reviewed In : 2023
Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 2: Environmental performance evaluation process
May, 2023
-
Identical under single numbering
44.
 IS/ISO 20140-3 : 2019
ISO 20140 - 3 : 2019
Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 3: Environmental performance evaluation data aggregation process
-
Identical under single numbering
45.
 IS/ISO 20140-5 : 2017
ISO 20140-5 : 2017
Reviewed In : 2023
Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 5: Environmental performance evaluation data
May, 2023
-
Identical under single numbering
46.
 IS/ISO 20242-1 : 2005
ISO 20242-1 : 2005
Reviewed In : 2022
Industrial automation systems and integration - Service interface for testing applications: Part 1 overview
November, 2022
-
Identical under single numbering
47.
 IS/ISO 8000-1 : 2022
ISO 8000-1 : 2022
Data Quality Part 1: Overview
-
Identical under single numbering
48.
 IS/ISO 8000-2 : 2022
ISO 8000-2 : 2022
Data Quality Part 2: Vocabulary
-
Identical under single numbering
49.
 IS/ISO 8000-8 : 2015
8000-8 : 2015
Data Quality Part 8: Information and data quality: Concepts and measuring
-
Identical under single numbering
50.
 IS/ISO/TS 8000-60 : 2017
ISO 8000-60 : 2017
Data Quality Part 60: Data quality management: Overview
-
Identical under single numbering
51.
 IS/ISO 8000-61 : 2016
ISO 8000-61 : 2016
Data Quality Part 61: Data quality management: Process reference model
-
Identical under single numbering
52.
 IS/ISO 8000-62 : 2018
ISO 8000-62 : 2022
Data Quality Part 62: Data quality management: Organizational process maturity assessment: Application of standards relating to process assessment
-
Identical under single numbering
53.
 IS/ISO 8000-63 : 2019
ISO 8000-63 : 2019
Data Quality Part 63: Data quality management: Process measurement
-
Identical under single numbering
54.
 IS/ISO 8000-64 : 2022
ISO 8000-64 : 2022
Data Quality Part 64: Data quality management: Organizational process maturity assessment: Application of the Test Process Improvement method
-
Identical under single numbering
55.
 IS/ISO 8000-65 : 2020
ISO 8000-65 : 2020
Data Quality Part 65: Data quality management: Process measurement questionnaire
-
Identical under single numbering
56.
 IS/ISO 8000-66 : 2021
ISO 8000-66 : 2021
Data Quality Part 66: Data quality management: Assessment indicators for data processing in manufacturing operations
-
Identical under single numbering
57.
 IS/ISO/TS 8000-81 : 2021
ISO 8000-81 : 2021
Data Quality Part 81: Data quality assessment: Profiling
-
Identical under single numbering
58.
 IS/ISO/TS 8000-82 : 2022
ISO 8000-82 : 2022
Data Quality Part 82: Data quality assessment: Creating data rules
-
Identical under single numbering
59.
 IS/ISO 8000-100 : 2016
ISO 8000-100 : 2016
Data Quality Part 100: Master data: Exchange of characteristic data: Overview
-
Identical under single numbering
60.
 IS/ISO 8000-110 : 2021
ISO 8000-110 : 2021
Data Quality Part 110: Master data: Exchange of characteristic data: Syntax semantic encoding and conformance to data specification
-
Identical under single numbering
61.
 IS/ISO 8000-115 : 2018
ISO 8000-115 : 2018
Data Quality Part 115: Master data: Exchange of quality identifiers: Syntactic semantic and resolution requirements
-
Identical under single numbering
62.
 IS/ISO 8000-116 : 2019
ISO 8000-116 : 2019
Data Quality Part 116: Master data: Exchange of quality identifiers: Application of ISISO 8000-115 to authoritative legal entity identifiers
-
Identical under single numbering
63.
 IS/ISO 8000-120 : 2016
ISO 8000-120 : 2016
Data Quality Part 120: Master data: Exchange of characteristic data: Provenance
-
Identical under single numbering
64.
 IS/ISO 8000-130 : 2016
ISO 8000-130 : 2016
Data Quality Part 130: Master data: Exchange of characteristic data: Accuracy
-
Identical under single numbering
65.
 IS/ISO 8000-140 : 2016
ISO 8000-140
Data Quality: Part 140 Master data: Exchange of characteristic data: Completeness
-
Identical under single numbering
66.
 IS/ISO 8000-150 : 2022
ISO 8000-150
Data Quality Part 150: Data quality management: Roles and responsibilities
-
Identical under single numbering
67.
 IS/ISO 8000-311 : 2012
ISO 8000-311 : 2012
Data Quality Part 311: Application of Product Data Quality for Shape (PDQ-S) � Guidance
-
Identical under single numbering

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
No Records Found

Preliminary Draft Standards

SI. No.
Doc No
TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
No Records Found

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
PGD 18 (24666)
Revision of: IS 14530:2019
Robotics Safety requirements Part 1 Industrial robots
2
PGD 18 (24668)
Revision of: IS 14530:2019
Robotics Safety requirements Part 2 Industrial robot applications and robot cells

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
No Records Found


Aspect Wise Report

 
 Product:   2
 Code of Practices :    24
 Methods of Test :   21
 Terminology :   10
 Dimensions :   0
 System Standard :   0
 Safety Standard :   7
 Others :    2
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 14530 : 1998
ISO 10210
Reviewed In : 2018
Manipulating industrial robots - Safety
2.
 IS 15031 : 2001
ISO/TR 11032
Reviewed In : 2018
Manipulating industrial robots - Application oriented test - Spot welding
3.
 IS 15032 (Part 1) : 2001
ISO 6210-1
Reviewed In : 2018
Cylinders for robot resistance welding guns Part 1 general requirements
4.
 IS 15033 : 2001
ISO/TR 11062
Reviewed In : 2018
Manipulating industrial robots - Emc test methods and performance evaluation criteria - Guidelines
5.
 IS 15035 : 2001
ISO/TR 10562
Reviewed In : 2012
Manipulating Industrial Robots - Intermediate Code for Robots ICR
6.
 IS 15294 : 2003
ISO/TR 10450
Reviewed In : 2013
Industrial Automation Systems and Integration - Operating Conditions for Discrete Part Manufacturing - Equipment in Industrial Environments
7.
 IS 15295 : 2003
ISO 10656
Reviewed In : 2018
Electric resistance welding - Integrated transformers for welding guns
8.
 IS 16606 : 2017
ISO 11593 : 1996
Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 13547 (Part 1) : 2010
Reviewed In : 2020
Manipulating industrial robots -- Mechanical interfaces Part 1 Plates second revision
2.
 IS 13547 (Part 2) : 2010
Reviewed In : 2020
Manipulating industrial robots -- Mechanical interfaces Part 2 Shafts first revision