Programme of work

BUREAU OF INDIAN STANDARDS

Production and General Engineering Department

Programme of Work

PGD13 : Bearing

Scope : Formulation of standards for rolling element bearings and hydro-mechanic bearing (including plain, thrust bush bimetallic, hydrostatic bearing and hydro dynamic bearings etc.)
Liaison :

ISO/TC 123 - Plain bearings - Participating (P)
ISO/TC 123/SC 2 - Materials and lubricants, their properties, characteristics, test methods and testing conditions - Participating (P)
ISO/TC 123/SC 3 - Dimensions, tolerances and construction details - Participating (P)
ISO/TC 123/SC 5 - Quality analysis and assurance - Participating (P)
ISO/TC 123/SC 6 - Terms and common items - Observer (O)
ISO/TC 123/SC 7 - Special types of plain bearings - Participating (P)
ISO/TC 123/SC 8 - Calculation methods for plain bearings and their applications - Participating (P)
ISO/TC 4 - Rolling bearings - Participating (P)
ISO/TC 4/SC 11 - Linear motion rolling bearings - Participating (P)
ISO/TC 4/SC 12 - Ball bearings - Participating (P)
ISO/TC 4/SC 4 - Rolling bearings - Vocabulary, boundary dimensions and geometrical product specifications - Participating (P)
ISO/TC 4/SC 4/WG 5 - Symbols, terms and definitions associated with GPS
ISO/TC 4/SC 5 - Roller Bearings - Participating (P)
ISO/TC 4/SC 6 - Insert bearings - Participating (P)
ISO/TC 4/SC 7 - Spherical plain bearings - Participating (P)
ISO/TC 4/SC 8 - Load ratings and life - Participating (P)
ISO/TC 4/SC 8/WG 9 - Rolling bearings — Methods for calculating the modified reference rating life for universally loaded bearings
ISO/TC 4/WG 25 - Cleanliness for rolling bearings

Published Standards

SI. No.	IS No.	Title	Reaffirmation Details	No. of Amendments	Degree of Equivalence
1.	IS 10203 : 1982 Reviewed In : 2023 Reaffirmed but not taken up for revision	Technical supply conditions for thin - Walled plain bearings	May, 2023	-	Indigenous
2.	IS 10260 (Part 1) : 2017 ISO 4378-1 : 2009 Reviewed In : 2021	Plain bearings - Terms, definitions, classification and symbols: Part 1 design, bearing materials and their properties (First Revision)	November, 2021	-	Identical under dual numbering
3.	IS 10260 (Part 2) : 1982 Reviewed In : 2020	Terms, definitions and classification of plain - Bearing: Part 2 friction and wear	June, 2020	-	Identical under dual numbering
4.	IS 10260 (Part 2) : 2024 ISO 4378-2:2017	Plain Bearings Terms Definitions Classification and Symbols Part 2 Friction and Wear Second revision		-	Identical under dual numbering
5.	IS 10260 (Part 3) : 2018 ISO 4378-3 : 2009 Reviewed In : 2024	Plain bearings - Terms, definitions, classification and symbols: Part 3 lubrication (First Revision)	March, 2024	-	Identical under dual numbering
6.	IS 10260 (Part 3) : 2024 ISO 4378-3:2017	Plain Bearings ï¿½ Terms, Definitions, Classification and Symbols Part 3 Lubrication (Second Revision)		-	Identical under dual numbering
7.	IS 10260 (Part 4) : 2024 ISO 4378-4:2009	Plain Bearings ï¿½ Terms, Definitions, Classification and Symbols Part 4 Basic Symbols		-	Identical under dual numbering
8.	IS 10260 (Part 5) : 2024 ISO 4378-5:2009	Plain Bearings ï¿½ Terms Definitions Classification and Symbols Part 5 Application of Symbols		-	Identical under dual numbering
9.	IS 10648 : 1983 Reviewed In : 2020 Reaffirmed but not taken up for revision	Code for identification of ring type needle bearings Including Sealed Bearings	June, 2020	-	Indigenous
10.	IS 11027 (Part 1) : 2019 ISO 1132-1 : 2000 Reviewed In : 2023	Rolling Bearing â€” Tolerances Part 1 Terms and Definitions ( First Revision )	May, 2023	-	Identical under dual numbering
11.	IS 11027 (Part 2) : 2018 ISO 1132-2 : 2001 Reviewed In : 2023	Rolling Bearing - Tolerances Part 2 Meauring and Gauging Principles and Methods	May, 2023	-	Identical under dual numbering
12.	IS 11904 : 2023 ISO 464 : 2015	Rolling bearings Radial bearings with locating snap ring Dimensions geometrical product specifications GPS and tolerance values		-	Identical under dual numbering
13.	IS 12102 : 1987 Reviewed In : 2023	Specification for tapered roller bearings	January, 2023	-	Indigenous
14.	IS/ISO 12297-1 : 2021 ISO 12297-1 : 2021	Rolling Bearings — Cylindrical Rollers Part 1 Boundary Dimensions, Geometrical Product Specifications (GPS) and Tolerance Values for Steel Rollers ( First Revision )		-	Identical under single numbering
15.	IS/ISO 12297-2 : 2018 ISO 12297-2 : 2018	Rolling bearings Cylindrical rollers Part 2: Boundary Dimensions Geometrical Product Specifications GPS and Tolerance Values for Ceramic Rollers		-	Identical under single numbering
16.	IS 13405 : 2018 ISO 246 : 2007 Reviewed In : 2023	Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions (Second Revision)	May, 2023	-	Identical under dual numbering
17.	IS 13406 : 2024 ISO 8443 : 2022	Rolling Bearings Radial Ball Bearings with Flanged Outer Ring Flange Dimensions (second revision)		-	Identical under dual numbering
18.	IS 13962 : 2018 ISO 10317 : 2008 Reviewed In : 2023	Rolling bearings - Tapered roller bearings - Designation system (First Revision)	May, 2023	1	Identical under dual numbering
19.	IS 14347 : 1996 Reviewed In : 2023	Plummer block housings - Specification	January, 2023	-	Indigenous
20.	IS 14478 : 1997 Reviewed In : 2023 Reaffirmed but not taken up for revision	Plain bearings - Thick - Walled bushes, plain and flange type, full - Round (without any joint or slit) - Specification	August, 2023	-	Indigenous
21.	IS 14802 (Part 1) : 2000 ISO 4384-1 Reviewed In : 2020	Plain bearings - Hardness testing of bearing metals: Part 1 compoundmaterials	May, 2020	-	Identical under dual numbering
22.	IS 14802 (Part 2) : 2024 ISO 4384-2 : 2022	Hardness Testing Of Bearing Metals â€” Plain Bearings Part 2 Solid Materials (Second Revision)		-	Identical under dual numbering
23.	IS 14803 (Part 1) : 2022 ISO 12129-1 :2019	Plain bearings Tolerances Part 1: Fits		-	Identical under dual numbering
24.	IS 14803 (Part 2) : 2022 ISO 12129-2 : 2019	Plain bearings Tolerances Part 2: Tolerances on form and position and surface roughness for shafts and thrust collars		-	Identical under dual numbering
25.	IS 15620 : 2019 ISO 4383 : 2012 Reviewed In : 2024	Plain Bearings — Multilayer Materials for Thin-Walled Plain Bearing ( First Revision )	April, 2024	-	Identical under dual numbering
26.	IS 15624 : 2005 ISO 6691 : 200 Reviewed In : 2020	Thermoplastic polymers for plain bearings - Classification and designation	June, 2020	-	Identical under dual numbering
27.	IS 15625 : 2022 ISO 12128 : 2020	Plain bearings Lubrication holes grooves and pockets Dimensions types designation and their application to bearing bushes		-	Identical under dual numbering
28.	IS 16298 : 2024 ISO 6280 : 2018	Plain Bearings â€” Requirements and Guidance on Backings for Thick-Walled Multilayer Bearings (First Revision)		-	Identical under dual numbering
29.	IS 16478 (Part 1) : 2024 ISO 4386-1 : 2019	Plain Bearings ï¿½ Metallic Multilayer Plain Bearings Part 1 Non-Destructive Ultrasonic Testing of Bond of Thickness Greater than or Equal to 05 mm (first revision)		-	Identical under dual numbering
30.	IS 16478 (Part 2) : 2024 ISO 4386-2 : 2019	Plain Bearings â€” Metallic Multilayer Plain Bearings Part 2 Destructive Testing of Bond for Bearing Metal Layer Thicknesses Greater than or Equal to 2 mm (First Revision)		-	Identical under dual numbering
31.	IS 16478 (Part 3) : 2023 ISO 4386-3 : 2018	Plain bearings Metallic multilayer plain bearings Part 3 : Non-destructive penetrant testing		-	Identical under dual numbering
32.	IS 16605 (Part 1) : 2018 ISO 2982-1:20132-1	Rolling bearings Accessories Part 1 : Dimensions for adapter sleeve assemblies and withdrawal sleeves		-	Identical under dual numbering
33.	IS 16605 (Part 2) : 2018 ISO 2982-2 : 2013	Rolling Bearings â€” Accessories Part 2 Dimensions for Locknuts and Locking Devices		-	Identical under dual numbering
34.	IS 16736 : 2020 ISO 3096 : 2018	Rolling Bearings — Needle Rollers — Boundary Dimensions, Geometrical Product Specifications ( GPS ) and Tolerance Values ( First Revision )		-	Identical under dual numbering
35.	IS 17126 : 2024 ISO 4381 : 2011	Plain Bearings â€” Tin Casting Alloys for Multilayer Plain Bearings (First Revision)		-	Identical under dual numbering
36.	IS 17267 : 2019 ISO/TS 16281 : 2008	Rolling Bearings - Methods for Calculating the Modified References Rating Life for Universally Loaded Bearings		-	Identical under dual numbering
37.	IS 17276 : 2019 ISO 15243 : 2017 Reviewed In : 2023	Rolling Bearings - Damage and Failures - Terms, Characteristics and Causes	May, 2023	-	Identical under dual numbering
38.	IS 18379 (Part 1) : 2023 ISO 21250-1 : 2020	Rolling bearings Noise testing of rolling bearing greases Part 1: Basic principles testing assembly and test machine		-	Identical under dual numbering
39.	IS 18392 : 2024 ISO 24393 : 2008	Rolling bearings Linear motion rolling bearings Vocabulary		-	Identical under dual numbering
40.	IS 18761 : 2024 ISO 15241 : 2012	Rolling Bearings Symbols for Physical Quantities		-	Identical under dual numbering
41.	IS 2399 : 2024 ISO 5593 : 2023	Rolling Bearings - Vocabulary ( Third Revision )		-	Identical under dual numbering
42.	IS 2898 (Part 1) : 2019 ISO 3290-1 : 2014	Rolling bearings -- Balls: Part 1 Steel balls (Second Revision)		-	Identical under dual numbering
43.	IS 2898 (Part 2) : 2019 ISO 3290-2 : 2014	Rolling bearings -- Balls: Part 2 Ceramic balls		-	Identical under dual numbering
44.	IS 3090 : 1965 Reviewed In : 2017	Code of practice for installation and maintenance of rolling bearings	July, 2017	-	Indigenous
45.	IS 3823 : 2014 ISO 76 : 2006 Reviewed In : 2023	Rolling bearings -- Static load ratings (Third Revision)	May, 2023	-	Identical under dual numbering
46.	IS 3824 : 2014 ISO 281 : 2007 Reviewed In : 2023	Rolling bearings -- Dynamic load ratings and rating life (Third Revision)	January, 2023	-	Identical under dual numbering
47.	IS 3980 : 1982 Reviewed In : 2020 Reaffirmed but not taken up for revision	Specification for porous metal powder oil -- Impregnated bearings (First Revision)	June, 2020	1	Not Equivalent
48.	IS 4215 : 1983 Reviewed In : 2020 Reaffirmed but not taken up for revision	Specification for ring type needle bearings (First Revision)	June, 2020	-	Indigenous
49.	IS 4216 : 1981 Reviewed In : 2021 Decision taken to Reaffirm and Archive	Specification for needle cages (First Revision)	May, 2021	1	Indigenous
50.	IS 4217 : 2020	Rolling bearings -- Needle rollers -- Specification (Second Revision)	-	-	Not Equivalent
51.	IS 4757 (Part 1) : 2020	Plain bearings -- Wrapped bushes: Part 1 Dimensions (Second Revision)		-
52.	IS 4757 (Part 2) : 2020 ISO 3547-2 : 2017	Plain bearings -- Wrapped bushes: Part 2 Test data for outside and inside diameters (Second Revision)		-	Identical under dual numbering
53.	IS 4757 (Part 3) : 2020 ISO 3547-3 : 2017	Plain bearings -- Wrapped bushes: Part 3 Lubrication holes, grooves and indentations (Second Revision)		-	Identical under dual numbering
54.	IS 4757 (Part 4) : 2020 ISO 3547-4 : 2017	Plain bearings -- Wrapped bushes: Part 4 Materials (Second Revision)		-	Identical under single numbering
55.	IS 4757 (Part 5) : 2022 ISO 3547-5 : 2020	Plain bearings -- Wrapped bushes: Part 5 Checking the outside diameter		-	Identical under dual numbering
56.	IS 4757 (Part 6) : 2022 ISO 3547-6 : 2020	Plain bearings Wrapped bushes Part 6: Checking the inside diameter		-	Identical under dual numbering
57.	IS 4757 (Part 7) : 2022 ISO 3547-7 : 2020	Plain bearings Wrapped bushes Part 7: Measurement of wall thickness of thin-walled Bushes		-	Identical under dual numbering
58.	IS 4773 : 2017 ISO 113 : 2010 Reviewed In : 2023	Rolling bearings - Plummer block housings - Boundary dimensions (Third Revision)	January, 2023	-	Identical under dual numbering
59.	IS 4774 (Part 1) : 2023	Plain bearings Thin-walled half bearings with or without flange Part 1: Tolerance design features and methods of test		-	Modified/Technically Equivalent
60.	IS 4774 (Part 2) : 2022 ISO 3548-2 : 2020	Plain bearings Thin-walled half bearings with or without flange Part 2: Measurement of wall thickness and flange thickness Second Revision		-	Identical under dual numbering
61.	IS 4774 (Part 3) : 2022 ISO 3548-3 : 2012	Plain bearing Thin-walled half bearing with or without flange Part 3: Measurement of peripheral length		-	Identical under dual numbering
62.	IS 5669 : 2019 ISO 15 : 2017 Reviewed In : 2023	Rolling bearings -- Radial bearings -- Boundary dimensions, general plan (Second Revision)	May, 2023	-	Identical under dual numbering
63.	IS 5692 : 2024 ISO 492 : 2023	Rolling Bearings â€” Radial Bearings â€” Geometrical Product Specifications (GPS) and Tolerance Values (Third Revision)		-	Identical under dual numbering
64.	IS 5932 : 2019 ISO 104 : 2015 Reviewed In : 2023	Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan (Second Revision)	May, 2023	-	Identical under dual numbering
65.	IS 5933 : 2024 ISO 199 : 2023	Rolling Bearings â€” Thrust Bearings â€” Geometrical Product Specifications (GPS) and Tolerance Values (Fifth Revision)		-	Identical under dual numbering
66.	IS 5934 : 1999 ISO 582-1995 Reviewed In : 2022	Rolling bearings -- Chamfer dimensions -- Maximum values -- Specification (Second Revision)	December, 2022	-	Identical under dual numbering
67.	IS 5935 (Part 1) : 2019 ISO 5753-1 : 2009 Reviewed In : 2023	Rolling bearings -- Internal clearance: Part 1 Radial internal clearance for radial bearings (Second Revision)	May, 2023	-	Identical under dual numbering
68.	IS 5935 (Part 2) : 2019 ISO 5753-2 : 2010 Reviewed In : 2023	Rolling bearings - Internal clearance: Part 2 axial internal clearance for four - Point - Contact ball bearings	May, 2023	-	Identical under dual numbering
69.	IS 6453 : 1984 Reviewed In : 2020	Technical supply conditions for rolling bearings	June, 2020	1	Indigenous
70.	IS 6454 : 1972 Reviewed In : 2021 Decision taken to Reaffirm and Archive	Specification for self - Aligning roller bearings	May, 2021	1	Indigenous
71.	IS 6455 : 2020	Single Row Deep Groove Ball Bearings — Specification ( First Revision )	-	-	Indigenous
72.	IS 6456 : 1972 Reviewed In : 2021 Decision taken to Reaffirm and Archive	Specification for double row radial ball bearings	May, 2021	1	Indigenous
73.	IS 6457 : 1972 Reviewed In : 2023	Specification for single row cylindrical roller bearings	January, 2023	1	Indigenous
74.	IS 6457 : 2024	SINGLE ROW CYLINDRICAL ROLLER BEARINGS SPECIFICATION		-	Indigenous
75.	IS 6458 : 1972 Reviewed In : 2020	Specification for double row cylindrical roller bearings	June, 2020	1	Indigenous
76.	IS 7461 : 2024 ISO 355 : 2019	Rolling Bearings â€” Tapered Roller Bearings â€” Boundary Dimensions and Series Designations (Fourth Revision)		-	Identical under dual numbering
77.	IS 9202 : 2020	Rolling Bearings — Cylindrical Rollers — Specification ( First Revision )	-	-	Not Equivalent
78.	IS 9619 : 1980 Reviewed In : 2023	Identification code for shell type needle bearings (Including Sealed Bearing)	January, 2023	-	Indigenous
79.	IS 9764 (Part 1) : 2022	Plain bearings Ring type thrust washers made from strip Dimensions and tolerances		-	Identical under dual numbering
80.	IS 9764 (Part 2) : 2022	Plain bearings Pressed bimetallic half thrust washers Features and tolerances		-	Modified/Technically Equivalent

Standards Under Develpoment

Projects Approved

SI. No.	Doc No	TITLE
No Records Found

Preliminary Draft Standards

SI. No.	Doc No	TITLE
1	PGD 13 (25113) Revision of: IS 4773:2017	Rolling Bearings Plummer Block Housings Boundary Dimensions fourth revision
2	PGD 13 (25114) Revision of: IS 6454:1972	Self - Aligning Roller Bearings Part 1 Single Row Specification first revision
3	PGD 13 (25116) Revision of: IS 6456:1972	Specification for Double Row Radial Ball Bearings first revision
4	PGD 13 (25118)	Rolling Bearings Cast and Pressed Housings for Insert Bearings Boundary Dimensions and Tolerances
5	PGD 13 (25119) Revision of: IS 6458:1972	Specification for Double Row Cylindrical Roller Bearings first revision
6	PGD 13 (25123) Revision of: IS 3090:1965	Installation and Maintenance of Rolling Bearings Code of Practice first revision
7	PGD 13 (25210)	Self - Aligning Roller Bearings Part 2 Double Row Specification
8	PGD 13 (25229) Revision of: IS 10260:2017	Plain Bearings Terms Definitions Classification and Symbols Part 1 Design Bearing Materials and Their Properties Second Revision
9	PGD 13 (26113) Revision of: IS 16605:2018	Specification for Rolling Bearings Accessories Part 1 Dimensions for Adapter Sleeve Assemblies and Withdrawal Sleeves First revision
10	PGD 13 (26114) Revision of: IS 16605:2018	Specification for Rolling Bearings Accessories Part 2 Dimensions for Locknuts And Locking Devices First Revision
11	PGD 13 (26126) Revision of: IS 12102:1987	Specification for Tapered Roller Bearings First Revision
12	PGD 13 (26185) Revision of: IS 9619:1980	Identification Code for Shell Type Needle Bearings First Revision

Drafts Standards in WC Stage

SI. No.	Doc No	TITLE
No Records Found

Draft Standards Completed WC Stage

SI. No.	Doc No	TITLE
1	PGD 13 (26119) Revision of: IS 4216:1981	Cages for Needle Roller Bearings Specification First Revision

Finalized Draft Indian Standard

SI. No.	Doc No	TITLE
1	PGD 13 (23244) Revision of: IS 17267:2019	Rolling Bearings Methods for calculating the modified reference rating life for universally loaded bearings first Revision

Finalized Draft Indian Standards under Print

SI. No.	Doc No	TITLE
1	PGD 13 (24930) Revision of: IS 14802:2000	Plain Bearings hardness testing of bearing metals Part 1 Multilayer bearings materials first revision
2	PGD 13 (24932)	Mechanical Vibration Vibration of Rotating Machinery Equipped with Active Magnetic Bearings Part 1 Vocabulary
3	PGD 13 (24935)	Mechanical Vibration Vibration of Rotating Machinery Equipped with Active Magnetic Bearings Part 2 Evaluation of Vibration
4	PGD 13 (24938)	Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings Part 3 Evaluation of stability margin
5	PGD 13 (24941)	Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings Part 4 Technical guidelines
6	PGD 13 (24945)	Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings Part 5 Touch-down bearings

Total Published Standards:71 Total Standards Under development : 20

Aspect Wise Report

Product:	28
Code of Practices :	7
Methods of Test :	15
Terminology :	9
Dimensions :	17
System Standard :	0
Safety Standard :	0
Others :	0
Service Specification :	0
Process Specification :	0
Unclassified :	1

Total :77

Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.	IS No.	Title
1.	IS 11027 : 1984 ISO 1132 Reviewed In : 2017	Definitions of Tolerances for Rolling Bearings
2.	IS 11145 : 2002 ISO 6524 Reviewed In : 2018	Plain bearings - Thin - Walled half - Bearings - Checking of peripheral length First Revision
3.	IS 14691 : 1999 Reviewed In : 2020	Rolling bearings - Taper rolling bearings - Tapered roller - Metric series - Specification
4.	IS 1859 : 1961	Threads Cutting Dies
5.	IS 1988 : 1962	Screwing Taps
6.	IS 2398 : 1967 Reviewed In : 2020	Identification code for rolling bearings
7.	IS 2898 : 1976 Reviewed In : 2016	Specification for steel balls for rolling bearings First Revision
8.	IS 3230 : 1970	Reccommendation for Tapping Drill Sizes
9.	IS 3824 (Part 1) : 1983 Reviewed In : 2006	Methods of evaluating dynamic load ratings of rolling bearings Part 1 Radial ball bearings
10.	IS 3824 (Part 2) : 1983 Reviewed In : 2006	Methods of evaluating dynamic load ratings of rolling bearings Part 2 Radial roller bearings
11.	IS 3824 (Part 3) : 1983 Reviewed In : 2006	Methods of evaluating dynamic load ratings of rolling bearings Part 3 Thrust ball bearings
12.	IS 3824 (Part 4) : 1983 Reviewed In : 2006	Methods of evaluating dynamic load ratings of rolling bearings Part 4 Thrust roller bearings
13.	IS 4025 : 2006 Reviewed In : 2020	Rolling bearings -- Gauging practice Second Revision
14.	IS 4058 : 1967 Reviewed In : 1991	Code of practice for fire safety of industrial buildings viscose rayon yarn and or staple fibre plants First Revision
15.	IS 4059 : 1967 Reviewed In : 1991	Accuracy requirements for medium quality medium speed gears
16.	IS 4702 : 1968 Reviewed In : 1991	Accuracy requirements for high precision gears
17.	IS 4725 : 1968 Reviewed In : 1991	Accuracy Requirements For Precision Gears
18.	IS 4757 : 1980 Reviewed In : 2020	Specification for wrapped bushes First Revision
19.	IS 4773 (Part 3) : 2021 ISO 3548-3	Plain bearing Thin-walled half bearings with or without flange Part 3 Measurement of peripheral length Adoption of ISO 3548-3 2012 Superseding IS 11145 1992
20.	IS 5617 : 1970	Recconmendations for Tapping Drill Sizes for Fastening Pipe Threads
21.	IS 5935 : 1992 Reviewed In : 2020	Radial internal clearances in unloaded radial rolling bearings First Revision
22.	IS 6172 : 1979	Hand Taps for Pipe Threads Parallel
23.	IS 6174 : 1971	Nut Screwing Tap for ISO Metric Screw Threads Coarse
24.	IS 6548 : 1992 ISO 1224 Reviewed In : 2020	Rolling bearings - Instrument precision bearings First Revision
25.	IS 6548 (Part 1) : 2016 ISO 1224-1 : 2007 Reviewed In : 2020	Rolling bearings - Instrument precision bearings Part 1 boundary dimensions tolerances and characteristics of metric series bearings Second Revision
26.	IS 6548 (Part 2) : 2015 ISO 1224-2 : 2007 Reviewed In : 2020	Rolling bearings - Instrument precision bearings Part 2 boundary dimensions tolerances and characteristics of inch series bearings Second Revision
27.	IS 6731 : 1977 Reviewed In : 2020	Specification for locknuts narrow series and lockwashers with straight inner tab for rolling bearings First Revision
28.	IS 7460 : 1988 Reviewed In : 2019	Tolerances for tapered roller bearings First Revision
29.	IS 7461 (Part 1) : 1993 Reviewed In : 2019	General plan of - Boundary dimensions for tapered roller bearings Part 1 single row bearings Second Revision
30.	IS 7461 (Part 2) : 1992 Reviewed In : 2019	Generalplanofboundarydimensions for tapered roller bearings Part 2 double row bearings Second Revision
31.	IS 7461 (Part 3) : 1992 Reviewed In : 2019	General plan of boundary dimensions for tapered roller bearings Part 3 flanged cups Second Revision
32.	IS 7796 : 1975	Hand Taps for Pipe Threads Taper
33.	IS 7821 : 1975	Long Shank Machine Taps with Nominal Diameters from M3 to M24
34.	IS 8656 : 1977 Reviewed In : 2016	Specification for tapered adapter sleeves for rolling bearings
35.	IS 8657 : 1977 Reviewed In : 2016	Specification for tapered withdrawal sleeves for rolling bearings
36.	IS 9169 : 1979	Dimensions for Thread Cutting Elements for Hand Taps and Machine Taps-serial

Annexure-II :List of Indian Product Standards

SI. No.	IS No. & Year	Title
1.	IS 10203 : 1982 Reviewed In : 2023 Reaffirmed but not taken up for revision	Technical supply conditions for thin - Walled plain bearings
2.	IS 11904 : 2023 ISO 464 : 2015	Rolling bearings Radial bearings with locating snap ring Dimensions geometrical product specifications GPS and tolerance values
3.	IS 12102 : 1987 Reviewed In : 2023	Specification for tapered roller bearings
4.	IS 14347 : 1996 Reviewed In : 2023	Plummer block housings - Specification
5.	IS 14478 : 1997 Reviewed In : 2023 Reaffirmed but not taken up for revision	Plain bearings - Thick - Walled bushes plain and flange type full - Round without any joint or slit - Specification
6.	IS 15620 : 2019 ISO 4383 : 2012 Reviewed In : 2024	Plain Bearings Multilayer Materials for Thin-Walled Plain Bearing First Revision
7.	IS 15624 : 2005 ISO 6691 : 200 Reviewed In : 2020	Thermoplastic polymers for plain bearings - Classification and designation
8.	IS 16298 : 2024 ISO 6280 : 2018	Plain Bearings Requirements and Guidance on Backings for Thick-Walled Multilayer Bearings First Revision
9.	IS 2898 (Part 1) : 2019 ISO 3290-1 : 2014	Rolling bearings -- Balls Part 1 Steel balls Second Revision
10.	IS 2898 (Part 2) : 2019 ISO 3290-2 : 2014	Rolling bearings -- Balls Part 2 Ceramic balls
11.	IS 3823 : 2014 ISO 76 : 2006 Reviewed In : 2023	Rolling bearings -- Static load ratings Third Revision
12.	IS 3824 : 2014 ISO 281 : 2007 Reviewed In : 2023	Rolling bearings -- Dynamic load ratings and rating life Third Revision
13.	IS 3980 : 1982 Reviewed In : 2020 Reaffirmed but not taken up for revision	Specification for porous metal powder oil -- Impregnated bearings First Revision
14.	IS 4215 : 1983 Reviewed In : 2020 Reaffirmed but not taken up for revision	Specification for ring type needle bearings First Revision
15.	IS 4216 : 1981 Reviewed In : 2021 Decision taken to Reaffirm and Archive	Specification for needle cages First Revision
16.	IS 4217 : 2020	Rolling bearings -- Needle rollers -- Specification Second Revision
17.	IS 4757 (Part 4) : 2020 ISO 3547-4 : 2017	Plain bearings -- Wrapped bushes Part 4 Materials Second Revision
18.	IS 4773 : 2017 ISO 113 : 2010 Reviewed In : 2023	Rolling bearings - Plummer block housings - Boundary dimensions Third Revision
19.	IS 4774 (Part 1) : 2023	Plain bearings Thin-walled half bearings with or without flange Part 1 Tolerance design features and methods of test
20.	IS 6454 : 1972 Reviewed In : 2021 Decision taken to Reaffirm and Archive	Specification for self - Aligning roller bearings
21.	IS 6455 : 2020	Single Row Deep Groove Ball Bearings Specification First Revision
22.	IS 6456 : 1972 Reviewed In : 2021 Decision taken to Reaffirm and Archive	Specification for double row radial ball bearings
23.	IS 6457 : 2024	SINGLE ROW CYLINDRICAL ROLLER BEARINGS SPECIFICATION
24.	IS 6458 : 1972 Reviewed In : 2020	Specification for double row cylindrical roller bearings
25.	IS 9202 : 2020	Rolling Bearings Cylindrical Rollers Specification First Revision
26.	IS 9619 : 1980 Reviewed In : 2023	Identification code for shell type needle bearings Including Sealed Bearing
27.	IS 9764 (Part 1) : 2022	Plain bearings Ring type thrust washers made from strip Dimensions and tolerances
28.	IS 9764 (Part 2) : 2022	Plain bearings Pressed bimetallic half thrust washers Features and tolerances