Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Production and General Engineering Department

Programme of Work




PGD9 : Abrasives


  • Scope : Standardization in the field of coated abrasives, grinding wheels and diamond/cubic boron nitride abrasive tools.
  • Liaison :
    ISO TC 29/SC 5 - Grinding wheels and abrasives - Participating (P)

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 1004 : 1980
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for valve grinding compound (First Revision)
September, 2024
1
Indigenous
2.
 IS 10489 : 1983
Reviewed In : 2021
Specification for steel dresser for abrasive wheels
April, 2021
-
Indigenous
3.
 IS 10519 : 1983
Reviewed In : 2020
Specification for diamond abrasive circular segmental saws
October, 2020
-
Indigenous
4.
 IS 10986 : 2013
ISO 6104:2005
Reviewed In : 2023
Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature (First Revision)
June, 2023
-
Identical under dual numbering
5.
 IS 11026 : 1984
Reviewed In : 2020
Specification for razor hone
October, 2020
-
Indigenous
6.
 IS 11643 : 1985
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for silicon carbide for bonded abrasive products
August, 2024
1
Indigenous
7.
 IS 12099 : 1987
Reviewed In : 2020
Specification for triangular polishing blocks for the use in floor polishing machines
October, 2020
-
Indigenous
8.
 IS 1249 : 1997
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Recommendations for selection of grinding wheels (Second Revision)
September, 2024
-
Indigenous
9.
 IS 1262 : 2021
Specification for Bonded Abrasive Specialities Second Revision of IS 1262
-
Indigenous
10.
 IS 12686 : 1989
ANSI B 74.20
Reviewed In : 2020
Abrasives - Diamond or cubicboron nitride micron powder sizes
October, 2020
-
Indigenous
11.
 IS 13520 : 1992
Reviewed In : 2020
Reaffirmed but not taken up for revision
Diamond abrasive frame saw blades - Specification
October, 2020
-
Indigenous
12.
 IS 13521 : 1992
Reviewed In : 2020
Marking system for diamond/cubic boron nitride abrasive products
October, 2020
-
Indigenous
13.
 IS/ISO 13942 : 2019
ISO 13942 : 2019
Bonded abrasive products — Limit deviations and run-out tolerances (First revision of IS/ISO 13942)
-
Identical under single numbering
14.
 IS 13998 : 2021
Multi-Point Diamond Impregnated Dressing Tools — Specification (First Revision of IS 13998 )
-
Indigenous
15.
 IS 14369 : 1996
Reviewed In : 2020
Abrasive belts - Designation, dimensions and tolerances and selection of width/length combinations
October, 2020
-
Not Equivalent
16.
 IS 14370 : 1996
Reviewed In : 2020
Determination of magnetic matter in abrasives - Test methods
October, 2020
1
Indigenous
17.
 IS 14992 : 2012
ISO 3919 : 2005
Reviewed In : 2024
Coated abrasives - Flap wheels with shaft (First Revision)
September, 2024
-
Identical under dual numbering
18.
 IS 15066 : 2001
Reviewed In : 2020
Coated abrasives - Flap wheel with incorporated flanges or separate flanges - - designation and dimensions
October, 2020
-
Not Equivalent
19.
 IS 15287 (Part 1) : 2003
ISO 6344-1
Reviewed In : 2020
Coated abrasives - Grain size analysis: Part 1 grain size distribution test
October, 2020
-
Identical under dual numbering
20.
 IS 15287 (Part 2) : 2003
Reviewed In : 2020
Coated abrasives - Grain size analysis: Part 2 determination of grain size distribution of macrogrits P12 to P220
October, 2020
-
Identical under dual numbering
21.
 IS 15287 (Part 3) : 2018
ISO 6344-3 : 2013
Coated abrasives - Grain size analysis: Part 3 determination of grain size distribution of microgrits P240 to P2500 (First Revision)
-
Identical under dual numbering
22.
 IS 15287 (Part 3) : 2024
6344-3:2021
Coated Abrasives Determination and designation of grain size distribution Part 3 Microgrit sizes P240 to P5000
-
Identical under dual numbering
23.
 IS 15288 (Part 1) : 2003
ISO 8486-1:1996
Reviewed In : 2023
Bonded abrasives - Determination and designation of grain size distribution: Part 1 macrogrits F4 to F220
June, 2023
-
Identical under dual numbering
24.
 IS 15288 (Part 2) : 2018

Reviewed In : 2023
Bonded abrasives - Determination and designation of grain size distribution: Part 2 microgrits F 230 to F 1200 (First Revision)
June, 2023
-
Identical under dual numbering
25.
 IS 15289 (Part 1) : 2013
ISO 9136-1: 2004
Reviewed In : 2023
Abrasive grains - Determination of bulk density: Part 1 macrogrits (First Revision)
June, 2023
-
Identical under dual numbering
26.
 IS 15289 (Part 2) : 2013
ISO 9136-2 :1999
Reviewed In : 2023
Abrasive grains - Determination of bulk density: Part 2 microgrits (First Revision)
June, 2023
-
Identical under dual numbering
27.
 IS 15290 : 2003
ISO 9138
Reviewed In : 2020
Abrasive grains - Sampling and splitting
October, 2020
-
Identical under dual numbering
28.
 IS 15290 : 2024
ISO 9138:2015
Abrasive Grains Sampling And Splitting
-
Identical under dual numbering
29.
 IS 15297 : 2018
ISO 6103: 2014
Reviewed In : 2023
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (Second Revision)
June, 2023
-
Identical under dual numbering
30.
 IS 15299 : 2019
ISO 666: 2012
Reviewed In : 2023
Machine tools - Mounting of grinding wheels by means of hub flanges (Second Revision)
June, 2023
-
Identical under dual numbering
31.
 IS 15425 : 2004
ISO 9137
Reviewed In : 2021
Abrasive grains -- Determinations of capillarity
April, 2021
-
Identical under dual numbering
32.
 IS 15538 : 2018
ISO 9284 : 2013
Abrasive grains - Test sieving machines
-
-
Identical under dual numbering
33.
 IS 15555 : 2004
ISO 3310-3
Reviewed In : 2023
Test sieves - Technical requirements and testing - Test sieves of electroformed sheets
June, 2023
-
Identical under dual numbering
34.
 IS/ISO 15635 : 2001
ISO 15635 : 2001
Reviewed In : 2023
Coated abrasives - Flap discs
June, 2023
-
Identical under single numbering
35.
 IS 17097 : 2019
ISO 6106 ; 2013
Reviewed In : 2023
Abrasive products - Checking the grain size of superabrasives
June, 2023
-
Identical under dual numbering
36.
 IS 17204 : 2019
ISO 22917 : 2016
Reviewed In : 2023
Precision Superabrasives — Limit Deviations and Run-out Tolerances for Grinding Wheels with Diamond or Cubic Boron Nitride
June, 2023
-
Identical under dual numbering
37.
 IS 17206 : 2019
ISO 16057 : 2002
Reviewed In : 2023
Coated Abrasives — Vulcanized Fibre Discs
June, 2023
-
Identical under dual numbering
38.
 IS 17207 (Part 1) : 2019
ISO 21537-1 : 2004
Clamping Flanges for Superabrasive Cutting-off Wheels Part 1 Natural Stone
-
Identical under dual numbering
39.
 IS 17207 (Part 2) : 2019
ISO 21537-2 : 2004
Reviewed In : 2023
Clamping Flanges for Superabrasive Cutting-off Wheels Part 2 Building and Construction
June, 2023
-
Identical under dual numbering
40.
 IS 1991 (Part 1) : 1987
ANSI B.7.1
Reviewed In : 2023
Safety requirements for the use, care and protection of abrasive grinding wheels : Part 1 definitions (Second Revision)
June, 2023
-
Indigenous
41.
 IS 1991 (Part 2) : 1987
ANSI B.7.1
Reviewed In : 2023
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 2 handling and storage (Second Revision)
June, 2023
-
Indigenous
42.
 IS 1991 (Part 3) : 1987
ANSI B.7.1
Reviewed In : 2023
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 3 general machine requirements (second revision)
June, 2023
-
Indigenous
43.
 IS 1991 (Part 4) : 1988
ANSI B.7.1
Reviewed In : 2023
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 4 safety guards (Second Revision)
June, 2023
-
Indigenous
44.
 IS 1991 (Part 5) : 1987
ANSI B.7.1
Reviewed In : 2023
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 5 flanges (Second Revision)
June, 2023
-
Indigenous
45.
 IS 1991 (Part 6) : 1987
ANSI B.7.1
Reviewed In : 2023
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 6 inspection and mounting (second revision)
June, 2023
-
Indigenous
46.
 IS 1991 (Part 7) : 1987
ANSI B.7.1
Reviewed In : 2023
Safety requirements forjhe use,care and projection of abrasive grinding wheels: Part 7 standard speeds (Second Revision)
June, 2023
-
Indigenous
47.
 IS 1991 (Part 8) : 1987
ANSI B.7.1
Reviewed In : 2023
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 8 special speeds (Second Revision)
June, 2023
-
Indigenous
48.
 IS 1991 (Part 9) : 1987
ANSI B.7.1
Reviewed In : 2023
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 9 general operating rules (Second Revision)
June, 2023
-
Indigenous
49.
 IS 1991 (Part 10) : 1987
ANSI B.7.1
Reviewed In : 2023
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 10 mounted wheels (Second Revision)
June, 2023
-
Indigenous
50.
 IS/ISO 21948 : 2001
ISO 21948 : 2001
Reviewed In : 2023
Coated abrasives - Plain sheets
June, 2023
-
Identical under single numbering
51.
 IS/ISO 21949-2001 : 2001
ISO 21949 : 2001
Reviewed In : 2023
Coated abrasives - Plain sheets with holes for dust extraction
June, 2023
-
Identical under single numbering
52.
 IS/ISO 21950 : 2001
ISO 21950: 2001
Reviewed In : 2023
Coated abrasives - Plain discs
June, 2023
-
Identical under single numbering
53.
 IS/ISO 21951 : 2001
ISO 21951 : 2001
Reviewed In : 2017
Coated abrasives - Plain discs with holes for dust extraction
May, 2017
-
Identical under single numbering
54.
 IS 2794 : 2021
Specification for Truing / Dressing Tools Single Diamond (Second Revision of IS 2794)
-
Indigenous
55.
 IS 2817 : 1965
Reviewed In : 2020
Methods for sampling of coated abrasives
October, 2020
-
Indigenous
56.
 IS 3178 : 1996
Reviewed In : 2018
Reaffirmed but not taken up for revision
Abrasive emery grain - Specification (First Revision)
March, 2018
-
Indigenous
57.
 IS 3300 : 1980
Reviewed In : 2018
Dimensions for mounted wheels and points (First Revision)
March, 2018
-
Indigenous
58.
 IS 5201 : 1969
Reviewed In : 2020
Reaffirmed but not taken up for revision
Methods for sampling of abrasive emery grain
October, 2020
-
Indigenous
59.
 IS 5319 : 1987
F.F.S. 740(a)-65
Reviewed In : 2024
Reaffirmed but not taken up for revision
Commercial steel, wool (First Revision)
September, 2024
1
Indigenous
60.
 IS 551 : 2018
ISO 525 : 2013
Reviewed In : 2018
Bonded abrasive products - General requirements (Fourth Revision
-
-
Identical under dual numbering
61.
 IS/ISO 603-1 : 1999
Reviewed In : 2023
Bonded abrasive products - Dimensions: Part 1 grinding wheels for external cylindrical grinding between centres
June, 2023
-
Identical under single numbering
62.
 IS/ISO 603-2 : 1999
Reviewed In : 2023
Bonded abrasive products - Dimensions: Part 2 grinding wheels for centreless external cylindrical grinding
June, 2023
-
Identical under single numbering
63.
 IS/ISO 603-3 : 1999
ISO 603_3: 1999
Reviewed In : 2023
Bonded Abrasive Products- Dimensions Part 3 Grinding Wheels for Internal Cylindrical Grinding
June, 2023
-
Identical under single numbering
64.
 IS/ISO 603-4 : 1999
ISO 603-4 : 1999
Reviewed In : 2023
Bonded abrasive products - Dimensions: Part 4 grinding wheels for surface grinding / peripheral grinding
June, 2023
-
Identical under single numbering
65.
 IS/ISO 603-5 : 2018
ISO 603-5 : 1999
Reviewed In : 2023
Bonded Abrasive Products- Dimensions Part 5 Grinding Wheels for Surface Grinding/Face Grinding
June, 2023
-
Identical under dual numbering
66.
 IS/ISO 603-6 : 1999
ISO 603-6 : 1999
Reviewed In : 2023
Bonded Abrasive Products - Dimensions Part 6 Grinding Wheels for Tool and Tool Room Grinding
June, 2023
-
Identical under dual numbering
67.
 IS/ISO 603-7 : 1999
ISO 603-7 : 1999
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 7 Grinding Wheels for Manually Guided Grinding
June, 2023
-
Identical under single numbering
68.
 IS/ISO 603-8 : 1999
ISO 603-8 : 1999
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 8 Grinding Wheels for Deburring and Fettling / Snagging
June, 2023
-
Identical under single numbering
69.
 IS/ISO 603-9 : 1999
ISO 603-9 : 1999
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 9 Grinding Wheels for High-Pressure Grinding
June, 2023
-
Identical under single numbering
70.
 IS/ISO 603-10 : 1999
ISO 603-10: 1999
Reviewed In : 2023
Bonded abrasive products - Dimensions: Part 10 stones for honing and superfinishings
June, 2023
-
Identical under single numbering
71.
 IS/ISO 603-11 : 1999
ISO 603-11 : 1999
Reviewed In : 2023
Bonded abrasive products — Dimensions Part 11 Hand Finishing Sticks
June, 2023
-
Identical under single numbering
72.
 IS/ISO 603-12 : 1999
ISO 603-12 : 1999
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 12 Grinding Wheels for Deburring and Fettling on a Straight Grinder
June, 2023
-
Identical under single numbering
73.
 IS/ISO 603-13 : 1999
ISO 603-13 : 1999
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 13 Grinding Wheels for Deburring and Fettling on a Vertical Grinder
June, 2023
-
Identical under single numbering
74.
 IS/ISO 603-14 : 1999
ISO 603-14 : 1999
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 14 Grinding Wheels for Deburring and Fettling / Snagging on an Angle Grinder
June, 2023
-
Identical under single numbering
75.
 IS/ISO 603-15 : 1999
ISO 603-15 : 1999
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 15 Grinding Wheels for Cutting-Off on Stationary or Mobile Cutting-Off Machines
June, 2023
-
Identical under dual numbering
76.
 IS/ISO 603-16 : 1999
ISO 603-16 : 1999
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 16 Grinding Wheels for Cutting-off on Hand Held Power Tools
June, 2023
-
Identical under single numbering
77.
 IS/ISO 603-17 : 2014
ISO 603-17 : 2014
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 17 Spindle Mounted Wheels ( ISO Type 52 )
June, 2023
-
Identical under single numbering
78.
 IS/ISO 603-18 : 1999
ISO 603-18 : 2013
Reviewed In : 2023
Bonded Abrasive Products — Dimensions Part 18 Grinding Wheels for Flat Glass Edge Grinding Machines
June, 2023
-
Identical under dual numbering
79.
 IS 715 : 2002
Reviewed In : 2024
Coated Abrasives
September, 2024
1
Indigenous

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
1
PGD 9 (25721)
Revision of: IS 15287:2003
Coated abrasives -- Determination and designation of grain size distribution Part 2 Microgrit sizes P12 to P220 First Revision
2
PGD 9 (26409)
Bonded abrasive products -- Dimensions -- Part 8 Grinding wheels for deburring and fettlingsnagging
3
PGD 9 (26410)
Bonded abrasive products -- Dimensions -- Part 9 Grinding wheels for high-pressure grinding
4
PGD 9 (26412)
Bonded abrasive products Dimensions Part 14 Grinding wheels for deburring and fettlingsnagging on an angle grinder
5
PGD 9 (26414)
Bonded abrasive products -- Dimensions -- Part 16 Grinding wheels for cutting-off on hand held power tools
6
PGD 9 (26415)
Coated abrasives Flap wheels with shaft
7
PGD 9 (26556)
Bonded abrasive products -- Dimensions -- Part 15 Grinding wheels for cutting-off on stationary or mobile cutting-off machines

Preliminary Draft Standards

SI. No.
Doc No
TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
No Records Found

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
PGD 9 (23612)
Revision of: IS 15538:2018
ABRASIVE GRAINS TEST SIEVING MACHINES
2
PGD 9 (23642)
Revision of: IS 551:2018
Bonded Abrasive Products Shape types Designation and Marking
3
PGD 9 (25720)
Revision of: IS 14369:1996
Coated Abrasives -- Abrasive belts -- Selection of width length combination

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
1
PGD 9 (23647)
Revision of: IS 15287:2003
Coated abrasives -- Determination and designation of grain size distribution Part 2 Macrogrit sizes P12 to P220

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
No Records Found


Aspect Wise Report

 
 Product:   29
 Code of Practices :    1
 Methods of Test :   8
 Terminology :   1
 Dimensions :   22
 System Standard :   0
 Safety Standard :   0
 Others :    16
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 10960 (Part 1) : 1984
Reviewed In : 2014
Grain sizes for diamond or cubic boron nitride Part 1 Designation and grain sizes distribution
2.
 IS 10960 (Part 2) : 1984
Reviewed In : 2014
Grain sizes for diamond or cubic boron nitride Part 2 Method of test of macro grits
3.
 IS 12057 : 1987
ISO 3920
Reviewed In : 2020
Dimensions for honing stones
4.
 IS 13068 : 1991
ISO 6103
Reviewed In : 2015
Bonded abrasive products - Static balancing of grinding wheels - Testing
5.
 IS 13564 : 1993
Reviewed In : 2015
Recommendations for selection of diamond and cubic boron nitride grinding wheels
6.
 IS 13596 : 1993
Reviewed In : 2020
Dimensional tolerances on grinding wheels
7.
 IS 15289 : 2003
Reviewed In : 2015
Abrasive macrograins - Determination of bulk density
8.
 IS 2324 (Part 1) : 1985
ANSI B74:2
Reviewed In : 2014
1985 bonded abrasive grinding wheels Part 1 profiles and types Second Revision
9.
 IS 2324 (Part 2) : 1985
Reviewed In : 2010
Bonded Abrasive Grinding Wheels - Part 2 Dimensions
10.
 IS 3264 : 1985
Reviewed In : 2018
Specification for diamond or cubic boron nitride abrasive grinding wheels First Revision
11.
 IS 3755 : 1966
Reviewed In : 2008
Emery Fillets
12.
 IS 715 (Part 1) : 1976
Reviewed In : 1998
Coated Abrasives - Part 1 General Applications
13.
 IS 715 (Part 2) : 1976
Reviewed In : 1998
Coated Abrasives - Part II Special and Mechanized Applications
14.
 IS 8915 : 1978
2933
Reviewed In : 2014
Dimensions for depressed centre wheels type 27
15.
 IS 9291 : 1979
ISO 1117
Reviewed In : 2014
Dimensions of internal grinding wheels


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 1004 : 1980
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for valve grinding compound First Revision
2.
 IS 10489 : 1983
Reviewed In : 2021
Specification for steel dresser for abrasive wheels
3.
 IS 10519 : 1983
Reviewed In : 2020
Specification for diamond abrasive circular segmental saws
4.
 IS 11026 : 1984
Reviewed In : 2020
Specification for razor hone
5.
 IS 11643 : 1985
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for silicon carbide for bonded abrasive products
6.
 IS 12099 : 1987
Reviewed In : 2020
Specification for triangular polishing blocks for the use in floor polishing machines
7.
 IS 1262 : 2021
Specification for Bonded Abrasive Specialities Second Revision of IS 1262
8.
 IS 12686 : 1989
ANSI B 74.20
Reviewed In : 2020
Abrasives - Diamond or cubicboron nitride micron powder sizes
9.
 IS 13520 : 1992
Reviewed In : 2020
Reaffirmed but not taken up for revision
Diamond abrasive frame saw blades - Specification
10.
 IS 13998 : 2021
Multi-Point Diamond Impregnated Dressing Tools Specification First Revision of IS 13998
11.
 IS 14992 : 2012
ISO 3919 : 2005
Reviewed In : 2024
Coated abrasives - Flap wheels with shaft First Revision
12.
 IS 15297 : 2018
ISO 6103: 2014
Reviewed In : 2023
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing Second Revision
13.
 IS 15299 : 2019
ISO 666: 2012
Reviewed In : 2023
Machine tools - Mounting of grinding wheels by means of hub flanges Second Revision
14.
 IS 15538 : 2018
ISO 9284 : 2013
Abrasive grains - Test sieving machines
15.
 IS 15555 : 2004
ISO 3310-3
Reviewed In : 2023
Test sieves - Technical requirements and testing - Test sieves of electroformed sheets
16.
 IS/ISO 15635 : 2001
ISO 15635 : 2001
Reviewed In : 2023
Coated abrasives - Flap discs
17.
 IS 17206 : 2019
ISO 16057 : 2002
Reviewed In : 2023
Coated Abrasives Vulcanized Fibre Discs
18.
 IS 17207 (Part 1) : 2019
ISO 21537-1 : 2004
Clamping Flanges for Superabrasive Cutting-off Wheels Part 1 Natural Stone
19.
 IS 17207 (Part 2) : 2019
ISO 21537-2 : 2004
Reviewed In : 2023
Clamping Flanges for Superabrasive Cutting-off Wheels Part 2 Building and Construction
20.
 IS/ISO 21948 : 2001
ISO 21948 : 2001
Reviewed In : 2023
Coated abrasives - Plain sheets
21.
 IS/ISO 21949-2001 : 2001
ISO 21949 : 2001
Reviewed In : 2023
Coated abrasives - Plain sheets with holes for dust extraction
22.
 IS/ISO 21950 : 2001
ISO 21950: 2001
Reviewed In : 2023
Coated abrasives - Plain discs
23.
 IS/ISO 21951 : 2001
ISO 21951 : 2001
Reviewed In : 2017
Coated abrasives - Plain discs with holes for dust extraction
24.
 IS 2794 : 2021
Specification for Truing Dressing Tools Single Diamond Second Revision of IS 2794
25.
 IS 3178 : 1996
Reviewed In : 2018
Reaffirmed but not taken up for revision
Abrasive emery grain - Specification First Revision
26.
 IS 5319 : 1987
F.F.S. 740(a)-65
Reviewed In : 2024
Reaffirmed but not taken up for revision
Commercial steel wool First Revision
27.
 IS 551 : 2018
ISO 525 : 2013
Reviewed In : 2018
Bonded abrasive products - General requirements Fourth Revision
28.
 IS/ISO 603-18 : 1999
ISO 603-18 : 2013
Reviewed In : 2023
Bonded Abrasive Products Dimensions Part 18 Grinding Wheels for Flat Glass Edge Grinding Machines
29.
 IS 715 : 2002
Reviewed In : 2024
Coated Abrasives