Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 1885 (Part 85) : 2003
IEC 60050(161)
Reviewed In : 2022

IS Title/आईएस शीर्षक : Electrotechnical vocabulary: Part 85 electromagnetic compatibility

Superseding IS/सुपरसीडिंग आईएस : 1885 : PART 36 : , 1885 : PART 64 : SEC 1,2

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Code of Practice

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : January, 2022

Technical Department/तकनीकी विभाग : LITD (Electronics and Information Technology Department)

Technical Committee/तकनीकी समिति : LITD 09 (Electromagnetic Compatibility Sectional Committee)

Member Secretary/सदस्य सचिव : JYOTI KUSHWAHA (SCIENTIST-D)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 1885 (Part 85) : 2003
IEC 60050(161)
Reviewed In : 2022 :

1	IS 1885 (Part 36) : 1972 Reviewed In : 2013	Electrotechnical vocabulary: Part 36 Interference	LITD 9
2	IS 1885 (Part 64/Sec 1) : 1987 IEC 50(704)	Electrotechnical vocabulary: Part 64 Electromagnetic compatibility, Sec 1 General terms	LITD 2
3	IS 1885 (Part 64/Sec 2) : 1987	Electrotechnical vocabulary: Part 64 Electromagnetic compatibility, Sec 2 Specific terms	LITD 2

International Standards Referred In IS 1885 (Part 85) : 2003
IEC 60050(161)
Reviewed In : 2022

Standard contains no Cross Referenced International Standard.

IS 1885 (Part 85) : 2003
IEC 60050(161)
Reviewed In : 2022 is Referred in following Indian Standards :

1	IS/IEC 60947 : Part 4 : Sec 2 : 2011	Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 2 a.c semiconductor motor controllers and starters (First Revision)	ETD 7
2	IS 14700 : Part 4 : Sec 24 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 24 test methods for protective devices for HEMP conducted disturbance (First Revision)	LITD 9
3	IS 14700 : Part 4 : Sec 7 : 2017	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 7 general guide on harmonic and interharmonics measurements and instrumentation, for power supply systems and equipment eonnected thereto (First Revision)	LITD 9
4	IS 6873 : Part 3 : 2015	Limits and methods of measurement of radio disturbance characteristics: Part 3 sound and television broadcast receivers and associated equipment (Third Revision)	LITD 9
5	IS 14700 : Part 4 : Sec 4 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 4 electrical fast transient / burst immunity test (Second Revision)	LITD 9
6	IS 14700 : Part 4 : Sec 2 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 2 electrostatic discharge immunity test (Second Revision)	LITD 9
7	IS 14700 : Part 4 : Sec 25 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 25 HEMP immunity test methods for equipment and systems	LITD 9
8	IS 14700 : Part 4 : Sec 14 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 14 voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase	LITD 9
9	IS 14700 : Part 4 : Sec 33 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 33 measurement methods for high - Power transient parameters	LITD 9
10	IS 10052 : Part 1 : Sec 3 : 2018	Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 3 Ancillary equipment — Disturbance power	LITD 9
11	IS 10052 : Part 4 : Sec 4 : 2018	Radio disturbance and immunity measuring apparatus and methods - Specificaiton: Part 4 uncertainties, statistics and limit modelling: Sec 4 statistics of complaints and a model for the calculation of limits for the protection of radio services	LITD 9
12	IS 10052 : Part 1 : Sec 5 : 2018	Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 5 Antenna calibration sites and reference test sites for 5 MHz to 18 GHz	LITD 9
13	IS 15039 : 2018	Information technology equipment - Immunity characteristics - Limits and methods of measurement (First Revision)	LITD 9
14	IS 10052 : Part 2 : Sec 1 : 2018	Specification for radio disturbance and immunity measuring apparatus and methods: Part 2 methods of measurement of disturbances and immunity: Sec 1 conducted disturbance measurements (Second Revision)	LITD 9
15	IS 12233 : Part 1 : 2018	Radio interference characteristics of overhead power lines and high - Voltage equipment: Part 1 description of phenomena	LITD 9
16	IS 12233 : Part 3 : 2019	Radio Interference Characteristics of Overhead Power Lines and High-Voltage Equipment Part 3 Code of Practice for Minimizing the Generation of Radio Noise ( Second Revision)	LITD 9
17	IS 14700 : Part 6 : Sec 1 : 2019	Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 1 Immunity standard for residential, commercial and light-industrial environments ( First Revision )	LITD 9
18	IS 14700 : Part 6 : Sec 2 : 2019	Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 2 Immunity standard for industrial environments ( First Revision )	LITD 9
19	IS 6873 : Part 5 : 2019	Limits and Methods of Measurement of Radio Disturbance Characteristics Part 5 Electrical Lighting and Similar Equipment ( Third Revision )	LITD 9
20	IS/IEC 61204 : Part 3 : 2016	Low-Voltage Switch Mode Power Supplies Part 3 Electromagnetic Compatibility ( EMC )	ETD 31
21	IS 15040 : 2020	Radio Disturbance Characteristics for Protection of Receivers used on Board Vehicles, Boats and Internal Combustion Engines — Limits and Methods of Measurement ( Second Revision )	LITD 9
22	IS/IEC 61800 : Part 5 : Sec 1 : 2016	Adjustable Speed Electrical Power Drive Systems Part 5 Safety Requirements Section 1 Electrical, thermal and energy	ETD 31
23	IS 14700 : Part 4 : Sec 17 : 2018	Electromagnetic Compatiblity (EMC) Part 4 Testing & Measurement Techniques Section 17 Ripple on d.c input Power Port Immunity Test	LITD 9
24	IS 14700 : Part 4 : Sec 5 : 2019	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 5 surge immunity test (First Revision)	LITD 9
25	IS 12552 : 2020	Sound and Television Broadcast Receivers and Associated Equipment — Immunity Characteristics — Limits and Methods of Measurement ( Second Revision )	LITD 9
26	IS 14700 : Part 3 : Sec 2 : 2020	Electromagnetic Compatibility (EMC) Part 3 Limits Section 2 Limits for harmonic current emissions ( equipment input current ? 16 A per phase ) ( Third Revision )	LITD 9
27	IS 14700 : Part 4 : Sec 6 : 2016	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 6 immunity to conducted disturbances, induced by radio - Frequency fields	LITD 9
28	IS 14700 : Part 4 : Sec 13 : 2016	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 13 harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity test	LITD 9
29	IS 14700 : Part 4 : Sec 34 : 2017	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 34 voltage dips, short interruptions and voltage variations immunity tests for current more than 16 A per phase	LITD 9
30	IS 14700 : Part 4 : Sec 35 : 2018	Electromagnetic Compatibility (EMC) Part 4 Testing & Measurement Techniques Section 35 HPEM Simulator Compendium	LITD 9
31	IS 1885 : Part 25 : 1967	Electrotechnical vocabulary: Part 25 radiolocation and radio - Navigation	LITD 12
32	IS 6873 : Part 4 : 1999	Limits and Methods of Measurement of Radio Disturbance Characteristics - Part 4 : Industrial, Scientific and Medical (ISM) Radio-frequency Equipment	LITD 9
33	IS 10052 : Part 1 : Sec 1 : 2019	Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 1 Measuring apparatus ( Third Revision )	LITD 9
34	IS 12233 : Part 2 : 2017	Radio interference characterstics of overhead power lines and high - Voltage equipment: Part 2 methods of measurement and procedure for determining limits (First Revision)	LITD 9
35	IS/IEC 62311 : 2007	Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)	LITD 9
36	IS/ISO 50004 : 2020	ENERGY MANAGEMENT SYSTEMS GUIDANCE FOR THE IMPLEMENTATION MAINTENANCE AND IMPROVEMENT OF AN ISO 50001 ENERGY MANAGEMENT SYSTEM First Revision	MED 39
37	IS 17607 : 2021	Polyolefin agricultural twines	TXD 9
38	IS/IEC 60862 : Part 1 : 2003	Surface acoustic wave (SAW) filters of assessed quality: Part 1 generic specification	LITD 24
39	IS 12746 : Part 2 : 1989	Telecontrol equipment and systems: Part 2 environmental conditions and power supplies	LITD 10
40	IS 14700 : Part 4 : Sec 3 : 2018	Electromagnetic Compatibility (EMC) Part 4 Testing and Measurement Techniques Section 24 Test methods for protective devices for HEMP conducted disturbance ( First Revision )	LITD 9
41	IS 6873 : PART 2 : SEC 2 : 2019	Limits and Methods of Measurement of Radio Disturbance Characteristics Part 2 Electromagnetic Compatibility (EMC) — Requirements for Household Appliances, Electric Tools and Similar Apparatus Section 2 Emission — Product family standard ( Forth Revision )	LITD 9
42	IS 10052 : Part 1 : Sec 4 : 2018	Radio disturbance and immunity measuring apparatus and methods - Specificaiton: Part 1 radio disturbance and immunity measuring apparatus: Sec 4 antennas and test sites for radiated disturbance measurements	LITD 9
43	IS 6873 : PART 2 : SEC 1 : 2015	Withdrawal	LITD 9

Classification Details

Group	:	Electronic and Telecom equipments, components and devices
Sub Group	:	Electronic components and devices
Sub Sub Group	:	Electrotechnical Vocabulary
Aspect	:	Code of Practice
Certification	:	None
Relevant Ministries	:
Sustainable development Goals :
Short Commom Man's Title	:	Electrotechnical Vocabulary - Part 85 : Electromagnetic Compatibility
ITC-HS Code	:	N/A
Degree of Equivalence	:	Identical under dual numbering
Identical/Equivalent International Standard(s)	:	IEC 60050(161)
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 1885 : Part 85 : 2003

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 1885 : Part 85 : 2003

List of Expired or Cancelled Licenses under IS : IS 1885 : Part 85 : 2003

List of laboratories for : IS 1885 : Part 85 : 2003

List of Amendement(s) for : IS 1885 : Part 85 : 2003

List of Gazette Document(s) for : IS 1885 : Part 85 : 2003

List of Corigenda Document(s) for : IS 1885 : Part 85 : 2003

List of Product Manuals & SIT