Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS/IEC 60603-4 : 1987
60603-4 : 1987
Reviewed In : 2024

IS Title/आईएस शीर्षक : Connectors for frequencies below 3 MHz for use with printed boards Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm ( 0.075 in )centres and staggered terminations at that same spacing

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under single numbering

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : September, 2024

Technical Department/तकनीकी विभाग : LITD (Electronics and Information Technology Department)

Technical Committee/तकनीकी समिति : LITD 03 (Electromechanical Components And Mechanical Structures For Electronic--equipment Sectional Committee)

Member Secretary/सदस्य सचिव : MS. ALISMITA KHAG (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 1

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS/IEC 60603-4 : 1987
60603-4 : 1987
Reviewed In : 2024 :

1	IS 1885 (Part 6) : 1978 Reviewed In : 2014	Electrotechnical vocabulary: Part 6 printed circuits (First Revision)	LITD 5
2	IS 10424 : 1982 Reviewed In : 2020	Guide for design and use of printed boards	LITD 5
3	IS 12448 (Part 1) : 1988 Reviewed In : 2016	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 1 general	LITD 3
4	IS 12448 (Part 2/Sec 1) : 1988 Reviewed In : 2019	Basic testing procedures and measuring methods for electrotechnical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 1 general examination	LITD 3
5	IS 12448 (Part 2/Sec 2) : 1988 Reviewed In : 2016	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 2 electrical continuity and contact resistance tests	LITD 3
6	IS 12448 (Part 2/Sec 3) : 1988 Reviewed In : 2016	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 3 insulation tests	LITD 3
7	IS 12448 (Part 2/Sec 4) : 1988 Reviewed In : 2016	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 4 voltage stress tests	LITD 3
8	IS 12448 (Part 3) : 1989 Reviewed In : 2022	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 3 current - Carrying capacity tests	LITD 3
9	IS 12448 (Part 4) : 1989 Reviewed In : 2022	Basic testing procedures and measuring methods for Electromechanical components for electronic equipment: Part 4 dynamic stress tests	LITD 3
10	IS 12448 (Part 5/Sec 1) : 1989 Reviewed In : 2016	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 1 impact tests (Free Components)	LITD 3
11	IS 12448 (Part 5/Sec 2) : 1989 Reviewed In : 2016	Basic testing procedure and measuring methods for electromechanical components: Part 5 (Fixed For Electronic Equipment Impact Tests (Free Components), static load tests components), endurance tests and overload tests .: Sec 2 static load tests (Fixed Components)	LITD 3
12	IS 12448 (Part 5/Sec 3) : 1989 Reviewed In : 2016	Basic testing measuring standard procedures and methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 3 endurance tests	LITD 3
13	IS 12448 (Part 5/Sec 4) : 1989 Reviewed In : 2016	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 4 overload tests	LITD 3
14	IS 12448 (Part 6) : 1991 Reviewed In : 2022	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 6 climatic tests and soldering tests	LITD 3
15	IS 12448 (Part 7) : 1990 Reviewed In : 2022	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 7 mechanical operating tests and sealing tests	LITD 3
16	IS 12448 (Part 8) : 1992 Reviewed In : 2022	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 8 connector tests (Mechanical) and mechanical tests on contacts and terminations	LITD 3
17	IS 12448 (Part 9) : 1992 Reviewed In : 2016	Basic testing procedures and measuring methods for electromechanical components for electronic equipment:Part 9 Cable-clamping tests, explosion hazard tests,chemical resistance tests,fire hazard tests of	LITD 3
18	IS 8945 : 1987 Reviewed In : 2020	Specification for electrical measuring instruments for explosive gas atmospheres (First Revision)	ETD 22

International Standards Referred In IS/IEC 60603-4 : 1987
60603-4 : 1987
Reviewed In : 2024

1	IEC 60050 : 581 : 2008
2	IEC 60603 : 1 : 1981

IS/IEC 60603-4 : 1987
60603-4 : 1987
Reviewed In : 2024 is Referred in following Indian Standards :

1	IS 265 : 2021	HYDROCHLORIC ACID SPECIFICATION Fifth Revision	CHD 1
2	IS 2840 : 2002	China clay for ceramic industry - Specification (Second Revision)	CHD 9
3	IS 4589 : 2002	Plastic clay and washed plastic clay for ceramic industry - Specification (Third Revision)	CHD 9
4	IS 15030 : 2001	Terephthalic acid - Specification	PCD 9
5	IS 4751 : 1994	Potassium metabisulphite, food grade - Specification (First Revision)	FAD 8
6	IS 1885 : Part 75 : 2021	Electrotechnical Vocabulary Part 75 : Control Technology (Second Revision)	ETD 1
7	IS 5464 : 1995	Citric acid, monohydrate - Specification	PCD 9
8	IS 6046 : 1982	Specification for gypsum for agricultural use (First Revision)	FAD 7
9	IS 8876 : 1978	Method for dete - Rmination of residue on chlorination of tungsten metal powder	MTD 25
10	IS 4105 : 2020	Specification for Styrene ( Vinyl Benzene ) ( Second Revision )	PCD 9
11	IS 12113 : 1987	Specification for ferrous sulphate heptahydrate, agricultural grade	FAD 7
12	IS 1909 : 1992	Indian curry powder - Specification (First Revision)	FAD 9
13	IS 13268 : 1992	Demineraltzation plant - Guidelines	CHD 13
14	IS 9909 : 1981	Specification for succinic acid for electroless plating	CHD 5
15	IS 12846 : 1989	Boric acid, photographic grade - Specification	CHD 5
16	IS 5295 : 1985	Specification for ethylene glycol (First Revision)	PCD 9
17	IS 1163 : 1992	Chocolates - Specification (Second Revision)	FAD 6
18	IS 254 : 1973	Specification for magnesium chloride (Second Revision)	CHD 1
19	IS 6831 : 1992	Caustic potash - Specification (Second Revision)	CHD 1
20	IS 2697 : 1976	Specification for ammonium bicarbonate for food industry (First Revision)	FAD 8
21	IS 255 : 1982	Specification for sodium sulphate, anhydrous (Technical Grade) (Second Revision)	CHD 1
22	IS 333 : 1980	Specification for potassium permanganate (Second Revision)	CHD 1
23	IS 380 : 1978	Specification for french chalk, technical (Second Revision)	CHD 1
24	IS 6605 : 1972	Specification for potassium chromate	CHD 1
25	IS 8642 : 1977	Specification for dyes for water - Based writing inks	CHD 14
26	IS 296 : 1986	Specification for sodium carbonate, anhydrous (Third Revision)	CHD 1
27	IS 330 : 1992	Chromium trioxide - Specification (Second Revision)	CHD 5
28	IS 573 : 1992	Trisodium phosphate - Specification (Fourth Revision)	CHD 1
29	IS 711 : 1970	Specification for ferric choride, technical (First Revision)	CHD 1
30	IS 799 : 1985	Specification for ammonia, liquor (Second Revision)	CHD 1
31	IS 2124 : 2000	Sodium bicarbonate - Specification (Second Revision)	CHD 1
32	IS 64 : 1972	Specification for barium sulphate pigments for paints (First Revision)	CHD 21
33	IS 12210 : 1987	Specification for caprolactam	PCD 12
34	IS 1448 : Part 138 : 2018	Methods of test for petroleum and its products [ p : 138 ] determination of soap content (First Revision)	PCD 1
35	IS 3959 : 2004	Skin powder - Specification (Second Revision)
36	IS 797 : 1982	Specification for common salt for chemical industries (Third Revision)	CHD 1
37	IS 9591 : 1996	Plasticizer esters - Methods of sampling and tests (First Revision)	PCD 27
38	IS 419 : 1967	Specification for putty, for use on window frames (First Revision)	CHD 20
39	IS 2018 : 1998	Chemical analysis of calcium silicon (Second Revision)	MTD 34
40	IS 9788 : 1981	Specification for titanium dioxide, rutile for paints	CHD 21
41	IS 7884 : 2004	Shampoo, surfactant based - Specification (Third Revision)
42	IS 2017 : 1967	Methods of chemical analysis of metallic manganese	MTD 34
43	IS 14194 : Part 1 : 2020	Radionuclides In Environmental Samples — Methods of Estimation Part 1 Gross Beta Activity Measurement ( Second Revision )	CHD 30
44	IS 3026 : 1991	Tin salts for electroplating - Specification (Second Revision)	CHD 5
45	IS 1156 : 1957	Specification for pearl barley	FAD 16
46	IS 10377 : 1982	Specification for para - Phenylenediamine
47	IS 3088 : 1967	Method for assaying of fine grade palladium	MTD 10
48	IS 9925 : 1981	Method for determination of gold and silver in gold and silver thread and embroidery materials	MTD 10
49	IS 256 : 1972	Specification for glauber salt (Sodium Sulphate, Decahydrate), technical first revision)	CHD 1
50	IS 505 : 1995	Light kaolin - Specification (Third Revision)	CHD 1
51	IS 566 : 1984	Specification for disodium phosphate, dodecahydrate (Second Revision)	CHD 1
52	IS 567 : 1993	Disodium phosphate, anhydrous - Specification (Second Revision)	CHD 1
53	IS 2270 : 1965	Methods for assaying of platinum and platinum alloys	MTD 10
54	IS 13055 : 1991	Methods of sampling and test for anaerobic adhesives and sealants	PCD 27
55	IS 574 : 1989	Glassy sodium metaphosphate specification (Fourth Revision)	CHD 1
56	IS 5296 : 1995	Chloroform, Pure and Technical - Specification (Second Revision)	PCD 9
57	IS 260 : 2001	Aluminium sulphate, non - Ferric - Specification (Second Revision)	CHD 1
58	IS 297 : 2001	Sodium sulphide, technical - Specification (Second Revision)	CHD 1
59	IS 571 : 2000	Monosodium phosphate specification (Second Revision)	CHD 1
60	IS 10513 : 1983	Specification for sodium oleostearate, technical (Soap Noodles)
61	IS 251 : 1998	Sodaash,technical - Specification (Fourth Revision)	CHD 1
62	IS 9924 : 1981	Specification for rhodium salts for electroplating	CHD 5
63	IS 258 : 2000	Potash alum - Specification (Second Revision)	CHD 1
64	IS 1218 : 1978	Determination of Phenols - (SEE IS 1201 to IS 1220)	PCD 6
65	IS 1219 : 1978	Determination of Naphthalene - (SEE IS 1201 to IS 1220)	PCD 6
66	IS 354 : Part 2 : 1986	Methods of sampling and test for resins for paints: Part 2 special test methods for alkyd resins (Second Revision)	CHD 21
67	IS 877 : 1989	Activated carbons, powdered and granular - Methods of sampling and test (Second Revision)	CHD 1
68	IS 701 : 1966	Specification for zinc chloride (Revised)	CHD 1
69	IS 1040 : 1987	Specification for calcium carbide, technical (Third Revision)	CHD 1
70	IS 1113 : 1965	Specification for ammonium chloride, technical and pure (Revised)	CHD 1
71	IS 308 : 1988	Specification for Dissolved Acetylene (Gas) (Third Revision)	CHD 6
72	IS 879 : 1981	Specification for sodium nitrite (First Revision)	CHD 1
73	IS 1078 : 1987	Specification for copper naphthenate (Second Revision)	CHD 1
74	IS 4846 : 1968	Specification for sodium potassium tartrate (Rochelle Salt)	CHD 5
75	IS 1809 : 1979	Specification for nickel salts for electroplating (Second Revision)	CHD 5
76	IS 1109 : 1980	Specification for borax (Second Revision)	CHD 1
77	IS 1314 : 1984	Specification for calcium chloride (Second Revision)	CHD 1
78	IS 266 : 1993	Sulphuric acid - Specification (Third Revision)	CHD 1
79	IS 1089 : 1986	Specification for oleum, technical (Second Revision)	CHD 1
80	IS 1699 : 1995	Methods of sampling and test for food colours (Second Revision)	FAD 8
81	IS 354 : Part 1 : 1987	Methods of sampling and test for resins for paints: Part 1 general test methods (Second Revision)	CHD 21
82	IS 3144 : 1992	Mineral wool thermal insulation materials - Method of test (Second Revision)	CHD 27
83	IS 70 : 1980	Specification for cuprous oxide for paints (First Revision)	CHD 21
84	IS 228 : Part 3 : 1987	Methods for chemical analysis 6f steels: Part 3 determination of phosphorus by alkalimetric method (Third Revision	MTD 34
85	IS 3607 : 1979	Specification for magnesite for chemical industry (First Revision)	CHD 1
86	IS 1813 : 1961	Code of Practice for Treatment of Water for Marine Boilers	CHD 13
87	IS 4150 : 1984	Specification for potassium chloride, technical (Second Revision)	CHD 1
88	IS 4847 : 2006	Copper salts for electroplating - Specification (Second Revision)	CHD 5
89	IS 6358 : 1971	Specification for potassium and sodium cyanides for electroplating	CHD 5

Classification Details

Group	:	Electronic and Telecom equipments, components and devices
Sub Group	:	Electronic components and devices
Sub Sub Group	:	Electromechanical components
Aspect	:	Product Specification
Certification	:	Voluntary Certification
Relevant Ministries	:	Ministry of Commerce and Industry - Department for Promotion of Industry and Internal Trade (DPIIT)
Sustainable development Goals :
Short Commom Man's Title	:
ITC-HS Code	:	N/A
Degree of Equivalence	:	Identical under single numbering
Identical/Equivalent International Standard(s)	:	60603-4 : 1987
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS/IEC 60603 : Part 4 : 1987

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 1

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS/IEC 60603 : Part 4 : 1987

List of Expired or Cancelled Licenses under IS : IS/IEC 60603 : Part 4 : 1987

List of laboratories for : IS/IEC 60603 : Part 4 : 1987

List of Amendement(s) for : IS/IEC 60603 : Part 4 : 1987

List of Gazette Document(s) for : IS/IEC 60603 : Part 4 : 1987

List of Corigenda Document(s) for : IS/IEC 60603 : Part 4 : 1987

List of Product Manuals & SIT