Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 325 : 1996
IEC 60034-1
Reviewed In : 2012

IS Title/आईएस शीर्षक : Three-phase Induction Motors (Withdrawn)

Superseded by IS/प्रतिस्थापित आईएस : IS 12615 : 2011

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 5

Number of Amendments/संशोधनों की संख्या : 3

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : 2012

Technical Department/तकनीकी विभाग : ETD (Electrotechnical Department)

Technical Committee/तकनीकी समिति : ETD 15 (Rotating Machinery Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. JATIN TIWARI (SCIENTIST-B)

Other Details

Gazette Document : 0

Classification details for: IS 325 : 1996

Click to view

Cross Reference Details

Click to view

Cross Reference Details

Indian Standards Referred In IS IS 325 : 1996
IEC 60034-1
Reviewed In : 2012 :

1	IS 1076 (Part 3) : 1985 ISO 497 Reviewed In : 2021	Preferred numbers: Part 3 guide to the choice of series of preferred numbers and of series containlng more rounded values of preferred numbers (Second Revision)	PGD 1
2	IS 1076 (Part 2) : 1985 ISO 17 Reviewed In : 2021	Preferred numbers: Part 2 guide to the use of preferred numbers and series of preferred numbers	PGD 1
3	IS 1076 (Part 1) : 1985 ISO 3 Reviewed In : 2021	Preferred numbers: Part 1 series of preferred numbers (Second Revision)	PGD 1
4	IS 1885 (Part 35) : 2021 IEC 60050: 411 Reviewed In : 2022	Electrotechnical vocabulary: Part 35 rotating machines (First Revision)	ETD 1
5	IS 3855 (Part 5) : 1984	Rectangular and square enamelled copper conductors: Part 5 Wire with temperature indes 180	ETD 33
6	IS 3855 (Part 4) : 1981	Rectangular and square enamelled copper conductors: Part 4 Wires with temperature indes 155	ETD 33
7	IS 3855 (Part 3) : 1978	Rectangular and square enamelled copper conductors: Part 3 Wires with high mechanical properties	ETD 33
8	IS 3855 (Part 2) : 1979	Rectangular and square enamelled copper conductors: Part 2 Methods of tests	ETD 33
9	IS 3855 (Part 1) : 1978	Rectangular and square enamelled copper conductors: Part 1 Thickness of enamel coating	ETD 33
10	IS 8544 (Part 4) : 1979	Motor starters for voltages not exceeding 1 000 V: Part 4 Reduced voltage ac starters: two step auto-transformer starters	ETD 7
11	IS 8544 (Part 3/Sec 2) : 1979	Motor starters for voltages not exceeding 1 000 V: Part 3 Rheostatic motor starters, Sec 2 Additional requirements for ac rheostatic motor controllers	ETD 7
12	IS 8544 (Part 3/Sec 1) : 1979	Motor starters for voltages not exceeding 1000 V: Part 3 Rheostatic motor starters, Sec 1 general requirements	ETD 7
13	IS 8544 (Part 2) : 1977	Motor starters for voltages not exceeding 1 000 V: Part 2 Star-delta starters	ETD 7
14	IS 8544 (Part 1) : 1977	Motor starters for voltages not exceeding 1 000 V: Part 1 Direction line ac starters	ETD 7
15	IS 13947 (Part 4/Sec 1) : 1993 Reviewed In : 2008	Low-Voltage Switchgear and Controlgear - Part 4 : Contractors and Motor-Starters - Section 1 : Electromechanical Contactors and Motor Starters	ETD 7
16	IS 4800 (Part 5) : 1968	Enamelled round winding wires: Part 5 Wires for elevated temperatures	ETD 33
17	IS 12661 (Part 1) : 1988 Reviewed In : 2005	High Voltae Motor-starter: Part 1 Direct-on-line (full Voltage) Ac Starters	ETD 8

International Standards Referred In IS 325 : 1996
IEC 60034-1
Reviewed In : 2012

Standard contains no Cross Referenced International Standard.

IS 325 : 1996
IEC 60034-1
Reviewed In : 2012 is Referred in following Indian Standards :

1	IS 1941 : Part 1 : 1976	Functional requirements for electric motor sirens: Part 1 ac, 4 - Phase, 50 hz, 415 volts type (Second Revision)	CED 22
2	IS 10386 : PART 11 : 2012	Safety Code for Construction, Operation and Maintenance of River Valley Projects: Part 11 Underground Excavation	WRD 21
3	IS 6279 : 1971	Specification for equipment for grit removal devices	CED 24
4	IS 6280 : 1971	Specification for sewage screens	CED 24
5	IS 10261 : 1982	Requirements for settling tank (Clarifier Equipment) for waste water treatment	CED 24
6	IS 10313 : 1982	Requirements for settling tank (clarifier equipment) for water treatment plant	CED 24
7	IS 9222 : Part 1 : 1990	Recommendations for handling and dosing devices for chemicals for water treatment: Part 1 coagulants (First Revision)	CED 24
8	IS 6938 : 2005	Design of rope drum and chain hoists for hydraulic gates - Code of practice (Second Revision)	WRD 12
9	IS 14279 : 1995	Lubricating equipment - Barrel transfer pumps for grease specification	PGD 19
10	IS 1646 : 2015	Fire safety of buildings (General): electrical installations - Code of practice (Third Revision)	CED 36
11	IS 12984 : 1990	Proforma for puruchase specification for plate bending machines	PGD 4
12	IS 2161 : 1996	Coolant pumps for general purpose machine tools - Specification (First Revision)	PGD 35
13	IS 4111 : Part 4 : 1968	Code of practice for ancillary structures in sewerage system: Part 4 puming stations and pumping mains (Rising Mains)	CED 24
14	IS 7090 : 1985	Guidelines for rapid mixing devices (First Revision)	CED 24
15	IS 8413 : Part 1 : 1977	Requirements for biological treatment equipment: Part 1 Trickling filters	CED 24
16	IS 8413 : Part 2 : 1982	Requirements for biological treatment end equipment: Part 2 Activated sludge process and its modifications	CED 24
17	IS 3938 : 1983	Specification for electric wire rope hoists (Second Revision)	MED 14
18	IS 4137 : 2015	Heavy duty electric overhead travelling cranes including special service machines for use in steel work - Code of practice (Second Revision)	MED 14
19	IS 4594 : 1968	Code of practice for design of portal and semi - Portal wharf cranes (Electrical)	MED 14
20	IS 6547 : 2015	Electric chain hoists - Specification (First Revision)	MED 14
21	IS 9507 : 1979	Specification for general purpose electric power driven winches for lifting and hauling	MED 14
22	IS 15419 : 2004	Jib cranes - Code of practice	MED 14
23	IS 12066 : 1987	Specification for three - Phase induction motors for machine tools	ETD 15
24	IS 13555 : 1993	Guide for selection and appltcation of 3 - Phase AC induction motors for different types of driven equipment	ETD 15
25	IS 13065 : 1991	Bulk handling equipment - Wagon marshalling equipment - Endless rope type - General requirements	MED 7
26	IS 2370 : 2014	Walk - In cold rooms - Specification (First Revision)	MED 3
27	IS 15879 : 2009	Breathing air compressor package - Specification	MED 22
28	IS 13404 : 2012	Power trowel - General requirements (First Revision)	MED 18
29	IS 12466 : 2012	Builders Hoist - General Requirements	MED 18
30	IS 11737 : 1996	Industrial bag stitching machine - Specification (First Revision)	MED 29
31	IS 12941 : 1990	Code of practice for selection and use of super capacity bucket elevator	MED 6
32	IS 6034 : 1989	Insulating oil conditioning plants - Specification (First Revision)	MED 17
33	IS 1474 : 1959	Specification for commercial refrigerators	MED 3
34	IS 7465 : 1974	Specification for portable and mobile troughed belt conveyors	MED 6
35	IS 7167 : 1974	Code for selection and use of bucket elevators	MED 6
36	IS 2635 : 1997	DC electric welding generators - Specification (Third Revision)	ETD 21
37	IS 9542 : 1980	Specification for horizontal centrifugal monoset pumps for clear, cold, fresh water	MED 20
38	IS 14222 : 1995	Impulse voltage withstand levels of rotating a.c. machines with form - Wound stator coils	ETD 15
39	IS 13805 : 2004	General standard for qualification and certification of non - Destructive testing personnel - Specification (First Revision)	MTD 21
40	IS 14377 : 1996	Specification for three - Phase induction motors for fans used in air - Conditioning and ventilation	ETD 15
41	IS 14578 : 1999	Three - Phase induction motors for use in nuclear power plants - Specification	ETD 15
42	IS 15881 : 2009	Three phase cage induction motors specifically designed for IGBT converter supply - Specification	ETD 15
43	IS 2223 : 1983	Dimensions of flange mounted AC induction motors	ETD 15
44	IS 2254 : 1985	Dimensions of vertical shaft motors for pumps (Second Revision)	ETD 15
45	IS 2972 : Part 3 : 1979	Specification for textile motors: Part 3 spinning frame motors (First Revision)	ETD 15
46	IS 4029 : 2010	Guide for testing three phase induction motors (First Revision)	ETD 15
47	IS 6362 : 1995	Designation of methods of cooling of rotating electrical machines (First Revision)	ETD 15
48	IS 7538 : 1996	Three - Phase squirrel cage induction motors for centrifugal pumps for agricultural application - Specification (First Revision)	ETD 15
49	IS 5571 : 2009	Guide for selection and installation of electrical equipment in hazardous areas (Other Than Mines) (Third Revision)	ETD 22
50	IS 5112 : 1972	General requirements and testing of ac cargo winches (for shipboard use) (First Revision)	TED 19
51	IS/IEC 61241 : PART 4 : 2001	Electrical apparatus for use in the presence of combustible dust: Part 4 type of protection "PD"	ETD 22
52	IS 11313 : 2007	Hydraulic Power Sprayers - Specification (First Revision)	FAD 11
53	IS 13523 : Part 2 : 1992	Medical Electrical Equipment - Shortwave Therapy Equipment: Part 2 Performance Requirements	MHD 15
54	IS 13836 : 1993	Potato peeling machine (Electrically Operated) - Specification	ETD 32
55	IS 13850 : 1993	Dish washing machine, heavy duty, ratchet type - Specification	ETD 32
56	IS 302 : Part 2 : Sec 35 : 2017	Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)	ETD 32
57	IS 302 : Part 2 : Sec 209 : 1994	Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines	ETD 32
58	IS 9334 : 1986	Specification for electric motor operated actuators (First Revision)	ETD 18
59	IS 2688 : 2009	Insulated stainless steel horizontal milk storage tank - Specification (First Revision)	FAD 33

Classification Details

Group	:	Electrical Switchgear and Other Electrical Products/Accessories
Sub Group	:	Motors, Winding Wires and Accessories
Sub Sub Group	:	Motors, Generators & Turbines
Aspect	:	Product Specification
Certification	:	None
Relevant Ministries	:	No Associated Ministry
Sustainable development Goals :
Short Commom Man's Title	:	Three-phase Induction Motors
ITC-HS Code	:	85015310
Degree of Equivalence	:
Identical/Equivalent International Standard(s)	:
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 325 : 1996

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Gazette Document : 0

Classification details for: IS 325 : 1996

Cross Reference Details

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 325 : 1996

List of Expired or Cancelled Licenses under IS : IS 325 : 1996

List of laboratories for : IS 325 : 1996

List of Amendement(s) for : IS 325 : 1996

List of Gazette Document(s) for : IS 325 : 1996

List of Corigenda Document(s) for : IS 325 : 1996

List of Product Manuals & SIT