Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 2428 : 2007
ISO 514 : 2004
Reviewed In : 2017

IS Title/आईएस शीर्षक : Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application (second revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : 2

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Others

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : September, 2017

Technical Department/तकनीकी विभाग : PGD (Production and General Engineering Department)

Technical Committee/तकनीकी समिति : PGD 32 (Cutting Tools Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. KRISHNA SUDHEENDRAN (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 2428 : 2007
ISO 514 : 2004
Reviewed In : 2017 :

Standard contains no Cross Referenced Indian Standard.

International Standards Referred In IS 2428 : 2007
ISO 514 : 2004
Reviewed In : 2017

Standard contains no Cross Referenced International Standard.

IS 2428 : 2007
ISO 514 : 2004
Reviewed In : 2017 is Referred in following Indian Standards :

1	IS 11394 : 1985	Specification for pliers, distal end cutting, with safety hold, dental	MHD 8
2	IS 12602 : 1989	Dental instruments - Nippers, cutting, carbide tip - Specificaition	MHD 8
3	IS 11118 : 1997	Guidelines for technical evaluation of general purpose parallel lathes	PGD 35
4	IS 9322 : 1980	Technical supply conditions for carbide tipped milling cutters	PGD 32
5	IS 9323 : 1991	Carbide tipped end mills with parallel shanks -- specification (first revision)	PGD 32
6	IS 9324 : 1991	Carbide tipped end mlls with morse taper shanks -- Specification (first revision)	PGD 32
7	IS 9325 : 1996	Carbide tipped slot drills with parallel shanks -- Specification (first Revision)	PGD 32
8	IS 9326 : 1996	Carbide tipped slot drills with morse taper and tapped end shanks -- Specification (first revision)	PGD 32
9	IS 9771 : 1981	Specification for carbide tipped core drills with morse taper shanks	PGD 32
10	IS 10412 : 1983	System of designation and marking of single point cutting tools with carbide tips	PGD 32
11	IS 10884 : 1984	Specification for carbide tipped chucking reamers with parallel shanks	PGD 32
12	IS 10885 : 1984	Specification for carbide tipped chucking reamers with morse taper shanks with short cutting edge	PGD 32
13	IS 10923 : 1994	Carbide tipped and solid carbide reamers - Technical supply conditions (First Revision)	PGD 32
14	IS 11441 : 1985	Dimensions for ground carbide rounds	PGD 32
15	IS 11943 : Part 1 : 1987	Specification for hard metal burrs: Part 1 technical supply conditions	PGD 32
16	IS 12716 : 2002	End mills with indexable specification (first revision)	PGD 32
17	IS 13167 : 1991	Side and face milling cutters with indexable inserts -- Specification	PGD 32
18	IS 13740 : 1993	Carbide Tipped Single Point Tools - Technical Supply Conditions	PGD 32
19	IS 13741 : Part 1 : 1993	Carbide tips: Part 1 Carbide tips for single point tools -- Specification	PGD 32
20	IS 13741 : Part 2 : 1993	Carbide tips: Part 2 Carbide tips for single point tools for light cutting operations -- Specification	PGD 32
21	IS 13741 : Part 3 : 1993	Carbide tips: Part 3 Carbide tips for single point tool blanks for sliding head type automats -- Specification	PGD 32
22	IS 13741 : Part 4 : 1993	Carbide tips: Part 4 Carbide tips for multi point tools -- Specification	PGD 32
23	IS 13741 : Part 5 : 1993	Carbide tips: Part 5 Carbide tips for twist drills with point angle 115 degree C -- Specification	PGD 32
24	IS 13741 : Part 7 : 1993	Carbide tips: Part 7 Carbide tips for single point round nose turning tools -- Speciification	PGD 32
25	IS 13742 : Part 1 : 1993	Carbide tipped single point tools ISO series: Part 1 Straight turning tool (ISO 1 ) -- Specification	PGD 32
26	IS 13742 : Part 2 : 1993	Carbide tipped single point tools -- ISO series: Part 2 Cranked turning and facing tool (ISO 2) -- Specification	PGD 32
27	IS 13742 : Part 4 : 1993	Carbide tipped single point tools -- ISO series: Part 4 Broad turning tool (ISO 4) -- Specification	PGD 32
28	IS 13742 : Part 3 : 1993	Carbide tipped single point tools -- ISO series: Part 3 Cranked finishing tool (ISO 3) -- Specification	PGD 32
29	IS 13742 : Part 5 : 1993	Carbide tips: Part 5 Carbide tips twist drills with point angle 115 degree -- Specification	PGD 32
30	IS 13742 : Part 6 : 1993	Carbide tipped single point tool ISO series: Part 6 Cranked turning tool (ISO 6) -- Specification	PGD 32
31	IS 13741 : Part 6 : 1993	Carbide tips: Part 6 Carbide tips for single point threading tools -- Specification	PGD 32
32	IS 13742 : Part 7 : 1993	Carbide tipped single point tools ISO series: Part 7 Parting off tool (ISO 7) -- Specification	PGD 32
33	IS 13742 : Part 9 : 1993	Carbide tipped single point tools -- ISO series: Part 9 Boring and facing tool (ISO 9) -- Specification	PGD 32
34	IS 13743 : Part 1 to 10 : 1997	Carbide tipped single point tools -- Ind series -- Specification	PGD 32
35	IS 13744 : Part 1 to 8 : 1995	Carbide tipped single point planing tools -- specification	PGD 32
36	IS 14168 : 2017	Side and face milling (Slotting) cutters with indexable inserts -- Dimensions (first revision)	PGD 32
37	IS 15144 : 2002	Indexable hardmetal (Carbide) inserts with rounded corners with partly cylindrical fixing hole -- Dimensions of inserts with 7Â° normal clearance for light alloy and plastic components turning	PGD 32
38	IS 16059 : 2013	Solid carbide parallel shank twist drills jobber series -- Specification	PGD 32
39	IS 16060 : 2013	Solid carbide parallel shank twist drills stub series -- Specification	PGD 32
40	IS 16136 : 2013	Solid carbide end mills with continuous parallel shank -- Specification	PGD 32
41	IS 3889 : 1985	Specification for chisels, dental (First Revision)	MHD 8
42	IS 4714 : 1985	Specification for scalers, dental, No. Sc 1/2, 3/4 and 5/6 (First Revision)	MHD 8
43	IS 13244 : 1991	Half side and face cutters with indexable inserts -- Specification	PGD 32
44	IS 13742 : Part 8 : 1993	Carbide tipped single point tools -- ISO series: Part 8 boring tool (ISO 8) -- Specification	PGD 32
45	IS 17026 : 2018	Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions	PGD 32
46	IS 17027 : 2018	Polycrystalline diamond inserts, tipped -- Dimensions, types	PGD 32

Classification Details

Group	:	Gases, Gas Cylinders , Machine tools and other mechanical products
Sub Group	:	Hand tools and machine components
Sub Sub Group	:	Turning and saw cutting tools
Aspect	:	Others
Certification	:	None
Relevant Ministries	:	Ministry of Consumer Affairs, Food and Public Distribution - Department of Consumer Affairs
Sustainable development Goals :
Short Commom Man's Title	:	Classification and application of hard cutting materials for metal removal with defined cutting edge
ITC-HS Code	:	82078000
Degree of Equivalence	:	Identical under dual numbering
Identical/Equivalent International Standard(s)	:	ISO 513 : 2004
Harmonized with	:	ISO

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 2428 : 2007

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 2428 : 2007

List of Expired or Cancelled Licenses under IS : IS 2428 : 2007

List of laboratories for : IS 2428 : 2007

List of Amendement(s) for : IS 2428 : 2007

List of Gazette Document(s) for : IS 2428 : 2007

List of Corigenda Document(s) for : IS 2428 : 2007

List of Product Manuals & SIT