Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 1060 (Part 5/Sec 1) : 2014
ISO 186 : 2002
Reviewed In : 2024

IS Title/आईएस शीर्षक : Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 1 sampling to determine average quality

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Methods of tests

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : August, 2024

Technical Department/तकनीकी विभाग : CHD (Chemical Department)

Technical Committee/तकनीकी समिति : CHD 15 (Paper And Its Products Sectional Committee)

Member Secretary/सदस्य सचिव : VIRENDRA SINGH (SCIENTIST-E)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 1060 (Part 5/Sec 1) : 2014
ISO 186 : 2002
Reviewed In : 2024 :

Details could not be found.

International Standards Referred In IS 1060 (Part 5/Sec 1) : 2014
ISO 186 : 2002
Reviewed In : 2024

Standard contains no Cross Referenced International Standard.

IS 1060 (Part 5/Sec 1) : 2014
ISO 186 : 2002
Reviewed In : 2024 is Referred in following Indian Standards :

1	IS 15891 : Part 11 : 2017	Textiles - Test Methods for Nonwovens Part 11 Run-Off	TXD 33
2	IS 15891 : Part 5 : 2017	Textiles - Test Methods for Nonwovens Part 5 Determination of Resistance to Mechanical Penetration (Ball Burst Procedure)	TXD 33
3	IS 1060 : Part 5 : Sec 20 : 2018	Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 20 determination of roughness/smoothness (Air Leak Methods) - Bendtsen method	CHD 15
4	IS 1060 : Part 4 : Sec 3 : 2018	Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulps: Sec 3 determination of residue (Ash) on ignition at 900°C	CHD 15
5	IS 7063 : Part 2 : 2018	Method of test for corrugated fibreboard: Part 2 determination of edgewise crush resistance (Unwaxed Edge Method) (First Revision)	CHD 16
6	IS 6213 : Part 21 : 2019	Methods of test for pulp: Part 21 paper, board and pulps - Determination of dry matter content - Oven - Drying method (First Revision)	CHD 15
7	IS 14700 : Part 4 : Sec 1 : 2019	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 1 overview of the IEC 61000 - 4 series (Second Revision)	LITD 9
8	IS 1060 : Part 5 : Sec 21 : 2019	Method of Sampling and Test for Paper and Allied Products Part 5 Method of Test for Paper and Board Section 21 Determination of roughness / smoothness ( Air leak methods ) â€” Sheffield method	CHD 15
9	IS 1060 : Part 4 : Sec 13 : 2020	Methods of Sampling and Test for Paper and Allied Products Part 4 Methods of Test for Paper, Board and Pulps Section 13 Measurement of diffuse blue reflectance factor â€” Indoor daylight conditions ( ISO brightness ) ( First Revision )	CHD 15
10	IS 1060 : Part 4 : Sec 2 : 2018	Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulps: Sec 2 determination of residue (Ash) on ignition at 525°C	CHD 15
11	IS 1060 : Part 5 : Sec 2 : 2014	Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 2 determination of moisture content of a lot - Oven - Drying method	CHD 15
12	IS/IEC 60794-1-2 : 2017	Optical fibre cables Part 1 Generic specification Section 2 Basic optical cable test procedures General guidance First Revision	LITD 11
13	IS 11163 : 2021	Medical Textiles First Aid Dressings Specification First Revision of IS 11163	TXD 36
14	IS 2026 : Part 11 : 2021	Power Transformers Part 11 Dry-Type Transformers	ETD 16
15	IS 1060 : Part 5 : Sec 5 : 2014	Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 5 determination of grammage	CHD 15
16	IS 11255 : Part 3 : Sec 2 : 2021	METHODS FOR MEASUREMENT OF EMISSIONS FROM STATIONARY SOURCES Part 3 Velocity and Volume Flowrate in Ducts Section 2 Automated Measurement Systems	CHD 35
17	IS 15891 : Part 15 : 2017	Textiles - Test Methods for Nonwovens Part 15 Determination of Air Rermeability	TXD 33
18	IS 1060 : Part 5 : Sec 8 : 2014	Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 8 determination of bending resistance - Taber - Type tester	CHD 15
19	IS 1060 : Part 5 : Sec 17 : 2014	Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 17 determination of roughness/smoothness (Air Leak Methods) - Print - Surf method	CHD 15
20	IS 1060 : Part 5 : Sec 19 : 2014	Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 19 determination of cie whiteness, C/2° (Indoor Illumination Conditions)	CHD 15
21	IS 1060 : Part 6 : Sec 2 : 2014	Methods of sampling and test for paper and allied products: Part 6 methods of test for paper: Sec 2 determination of bursting strength of paper	CHD 15
22	IS/ISO 23195 : 2021	Security objectives of information systems of third-party payment services	SSD 3
23	IS 1060 : Part 4 : Sec 7 : 2018	Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 7 determination of pH of aqueous extracts - Hot extraction method	CHD 15
24	IS 1060 : Part 4 : Sec 8 : 2014	Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 8 determination of water soluble chlorides	CHD 15
25	IS 1060 : Part 4 : Sec 9 : 2014	Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 9 determination of water soluble sulfates	CHD 15
26	IS 15891 : Part 1 : 2011	Textiles - Test Methods for Non-Wovens Part 1 Determination of Mass Per Unit Area	TXD 33
27	IS 15891 : Part 3 : 2011	Textiles - Test Methods for Nonwovens Part 3 Determination of Tensile Strength and Elongation	TXD 33
28	IS 15891 : Part 18 : 2017	Textiles - Test Methods for Nonwovens Part 18 Determination of Breaking Strength and Elongation of Nonwoven Materials Using the Grab Tensile Test	TXD 33
29	IS 1060 : Part 5 : Sec 4 : 2014	Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 4 determination of water absorptiveness - Cobb method	CHD 15
30	IS 1060 : Part 5 : Sec 18 : 2014	Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 18 determination of cie whiteness, D65/10° (Outdoor Daylight)	CHD 15
31	IS 15891 : Part 4 : 2011	Textiles - Test Methods for Nonwovens Part 4 Determination of Tear Resistance	TXD 33
32	IS 15891 : Part 13 : 2017	Textiles - Test Methods for Nonwovens Part 13 Repeated Liquid Strike-Through Time	TXD 33
33	IS 6283 : Part 2 : 2023	Tractors Machinery for Agriculture and Forestry Powered Lawn and Garden Equipment Symbols for Operator Controls and Other Displays Part 2 Symbols for Agricultural Tractors and Machinery (Third Revision)	FAD 11
34	IS 14400 : 2023	PALM SUGAR SPECIFICATION First Revision	FAD 2
35	IS 1060 : Part 7 : Sec 1 : 2014	Methods of sampling and test for paper and allied products: Part 7 methods of test for board: Sec 1 determination of bursting strength of board	CHD 15
36	IS/ISO 20140 : Part 2 : 2018	Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 2: Environmental performance evaluation process	PGD 18
37	IS/ISO/IEC 80079 : Part 20 : Sec 1 : 2017	Explosive atmospheres - Part 20 Material characteristics for gas and vapour classification Section 1 Test methods and data	ETD 22

Classification Details

Group	:	Chemicals, Plastics and their Products including packaging and Environment
Sub Group	:	Chemical Products
Sub Sub Group	:	Boards, corrugated/fibreboard boxes and cartons and other packages
Aspect	:	Methods of tests
Certification	:	Not Certifiable
Relevant Ministries	:	Ministry of Chemicals and Fertilizers - Department of Chemicals and Petrochemicals (DCPC), Ministry of Environment, Forest and Climate Change, Ministry of Railways
Sustainable development Goals :
Short Commom Man's Title	:	Methods of Sampling and Test for Paper and Allied Products Part 5 Methods of Test for Paper and Boar
ITC-HS Code	:
Degree of Equivalence	:	Identical under dual numbering
Identical/Equivalent International Standard(s)	:	ISO 186
Harmonized with	:	ISO

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 1060 : Part 5 : Sec 1 : 2014

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 1060 : Part 5 : Sec 1 : 2014

List of Expired or Cancelled Licenses under IS : IS 1060 : Part 5 : Sec 1 : 2014

List of laboratories for : IS 1060 : Part 5 : Sec 1 : 2014

List of Amendement(s) for : IS 1060 : Part 5 : Sec 1 : 2014

List of Gazette Document(s) for : IS 1060 : Part 5 : Sec 1 : 2014

List of Corigenda Document(s) for : IS 1060 : Part 5 : Sec 1 : 2014

List of Product Manuals & SIT