Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 4218 (Part 5) : 1979
Reviewed In : 1996

IS Title/आईएस शीर्षक : ISO Metric screw threads Part V Tolerances (Withdrawn)

Superseded by IS/प्रतिस्थापित आईएस : IS 14962 : Part 3

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 1

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : N/A

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : 1996

Technical Department/तकनीकी विभाग : PGD (Production and General Engineering Department)

Technical Committee/तकनीकी समिति : PGD 37 (General Engineering and Fasteners Standards Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. MONARCH JOSHI (SCIENTIST-C)

Other Details

Gazette Document : 0

Classification details for: IS 4218 : Part 5 : 1979

Click to view

Cross Reference Details

Click to view

Cross Reference Details

Indian Standards Referred In IS IS 4218 (Part 5) : 1979
Reviewed In : 1996 :

Details could not be found.

International Standards Referred In IS 4218 (Part 5) : 1979
Reviewed In : 1996

Standard contains no Cross Referenced International Standard.

IS 4218 (Part 5) : 1979
Reviewed In : 1996 is Referred in following Indian Standards :

1	IS 902 : 1992	Suction hose couplings for fire fighting purposes - Specification (Third Revision)	CED 22
2	IS 1703 : 2000	Water fittings - copper alloy float valves (horizontal plunger type) - Specification (fourth revision)	CED 3
3	IS 11931 : 1987	Specification for Sewer Cleaning Metal Rods	CED 24
4	IS 1361 : 1978	Specification for Steel Windows for Industrial Buildings	CED 11
5	IS 1038 : 1983	Specification For Steel Doors, Windows And Ventilators	CED 11
6	IS 12665 : Part 3 : 1989	Press Working Tools - Shanks:part 3 Shanks with Screwed Shaft	PGD 4
7	IS 12582 : 1989	Tommy screws with fixed bar Specification	PGD 35
8	IS 2670 : 1991	Thread milling cutter shell type specification (first revision)	PGD 32
9	IS 6171 : 1992	Screwing taps - Technical supply conditions (Second Revision)	PGD 32
10	IS 6175 : Part 1 : 1992	Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision)	PGD 32
11	IS 6175 : Part 2 : 1992	Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision)	PGD 32
12	IS 6175 : Part 3 : 1992	Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision)	PGD 32
13	IS 6175 : Part 4 : 1991	Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification	PGD 32
14	IS 6175 : Part 5 : 1991	Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification	PGD 32
15	IS 8616 : 1993	Stub milling arbors with self-release 7/24 taper and with key -- Specification (first revision)	PGD 32
16	IS 8620 : 1993	Clamping nuts for milling arbors specification (first revision)	PGD 32
17	IS 8621 : 1977	Specification for retaining screw for milling arbors	PGD 32
18	IS 10749 : 1983	Specification for swivel head nut for screw type mounts in pusher legs	PGD 8
19	IS 4009 : Part 2 : 1981	Specification for grease nlpples: Part 2 conical head grease nipples (First Revision)	PGD 19
20	IS 9762 : 1994	Specification for polyethylene floats (Spherical) for float valves (first revision)	CED 3
21	IS 10131 : 1992	Link chain ends and chain bows for bucket elevators - Specification (First Revision)	MED 14
22	IS 7285 : Part 1 : 2018	Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision)	MED 16
23	IS 13065 : 1991	Bulk handling equipment - Wagon marshalling equipment - Endless rope type - General requirements	MED 7
24	IS 5740 : 1996	Household sewing machines - Memorandum on screw threads for sewing machine components (First Revision)	MED 29
25	IS 13517 : 1992	Rock bolts - Resin type - Specification	MED 8
26	IS 13219 : 1992	Rock bolts for mines (Cement Grouted) - General requirements	MED 8
27	IS 6680 : 1992	Railway carriagefans - Specification (First Revision)	ETD 32
28	IS 10288 : 1982	Specification for belt - Fasteners, plate type	PGD 40
29	IS 4190 : 1984	Specification for eye bolts with collars (First Revision)	MED 14
30	IS 15100 : 2018	Multi - Function valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision)	MED 16
31	IS 2687 : 1991	Capnuts - Specification (Second Revision)	PGD 37
32	IS 14612 : 1999	Commercial burners using LPG at inlet pressure up to 147.1 kN/m2 (1 500 gf/cm2) - Specification	MED 23
33	IS 5556 : 1991	Serratedlockwashers - Specification (First Revision)	PGD 37
34	IS 7790 : 1991	Domed cap nuts - Specification (First Revision)	PGD 37
35	IS 7795 : 2004	Hexagon nuts with collar - Specification (First Revision)	PGD 37
36	IS 8070 : 1991	Screws - Slotted capstan (Tommy bolts) - Specification (First Revision)	PGD 37
37	IS 8856 : 1991	Hexagon weld nuts - Specification (First Revision)	PGD 37
38	IS 13902 : Part 3 : 1993	Sockets for wire ropes for general purposes: Part 3 special requirements for sockets produced by casting	MED 10
39	IS 15137 : 2002	Metal connecting lugs for porcelain transformer bushings - Specification	ETD 6
40	IS 3347 : Part 8 : Sec 2 : 1992	Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 : 52 kV bushings: Sec 2 metal parts	ETD 6
41	IS 4318 : 1993	Solid core porcelain insulators for overhead traction lines - Specification (First Revision)	ETD 6
42	IS 7624 : 1990	Lead - Acid starter batteries for diesel - locomotives and rail cars - Specification (First Revision)	ETD 11
43	IS 5744 : 1991	Copper alloy screwed ferrules for condenser, heater and cooler tubes - Specification (First Revision)	MTD 8
44	IS 6137 : 1983	Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision)	PGD 25
45	IS 7018 : Part 2 : 1983	Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision)	PGD 25
46	IS 2254 : 1985	Dimensions of vertical shaft motors for pumps (Second Revision)	ETD 15
47	IS 6623 : 2004	High Strength Structural Nuts	PGD 37
48	IS 12943 : 1990	Brass glands for PVC cables - Specification	ETD 9
49	IS 3174 : 1974	Specification for pipe union bolt (First Revision)	TED 2
50	IS 1063 : 1997	Automotive vehicles - Ml4 x 1.25 spark plugs with flat seating and their cylinder head housing - Specification (Second Revision)	TED 11
51	IS 6148 : 1971	Specification for head fittings and round nuts used with ships blocks	TED 17
52	IS 6176 : 1971	Steel Ladders for Ship's Use	TED 17
53	IS 3323 : 1980	Specification for bi-pin landholders for tubular fluorescent lamps (First Revision)	ETD 14
54	IS 9388 : Part 2 : 2019	Equal elbow body for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision)	PGD 36
55	IS 9388 : Part 1 : 1979	Specification for equal elbow body for oil - Hydraulic couplings: Part 1 made from forgings	PGD 36
56	IS 9389 : Part 1 : 2018	Specification for - Equal tee - Body for oil - Hydraulic couplins: Part 1 tee body made from forgings	PGD 36
57	IS 9390 : 2018	Specification for straight coupling body for oil - Hydraulic couplings	PGD 36
58	IS 9389 : Part 2 : 2018	Specification for equal tee body for oil - Hydraulic couplings: Part 2 made from bar stock	PGD 36
59	IS 9387 : Part 1 : 2018	Specification for taper male stud elbow body for oil - Hydraulic c0upling: Part 1 made from forgings zyxw	PGD 36
60	IS 9387 : Part 2 : 2018	Specification for taper male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock	PGD 36
61	IS 9229 : 1979	Specification for inductors for electromagnetic interference suppression	LITD 24
62	IS 6297 : Part 1 : 1971	Specification for transformers and inductors (Power, Audio, Pulse And Switching) for electronic equipment: Part 1 general requirements and tests	LITD 24
63	IS/ISO 12812 : Part 1 : 2017	Core banking- Mobile financial services- Part 1: General framework	SSD 3
64	IS 11563 : 1986	Technical supply conditions for dynamic compressors	MED 22

Classification Details

Group	:	N/A
Sub Group	:	N/A
Sub Sub Group	:	N/A
Aspect	:
ITC-HS Code	:	N/A
Degree of Equivalence	:
Identical/Equivalent International Standard(s)	:
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 4218 : Part 5 : 1979

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Gazette Document : 0

Classification details for: IS 4218 : Part 5 : 1979

Cross Reference Details

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 4218 : Part 5 : 1979

List of Expired or Cancelled Licenses under IS : IS 4218 : Part 5 : 1979

List of laboratories for : IS 4218 : Part 5 : 1979

List of Amendement(s) for : IS 4218 : Part 5 : 1979

List of Gazette Document(s) for : IS 4218 : Part 5 : 1979

List of Corigenda Document(s) for : IS 4218 : Part 5 : 1979

List of Product Manuals & SIT