Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 10322 (Part 1) : 2014
Reviewed In : 2019

IS Title/आईएस शीर्षक : Luminaires: Part 1 general requirements and tests (First Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Modified/Technically Equivalent

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : 1

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : 2019

Technical Department/तकनीकी विभाग : ETD (Electrotechnical Department)

Technical Committee/तकनीकी समिति : ETD 49 (Illumination Engineering and Luminiaries Sectional Committee)

Member Secretary/सदस्य सचिव : MS. NEHA AGARWAL (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 1

Click to download

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 1

Click to view

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 10322 (Part 1) : 2014
Reviewed In : 2019 :

1	IS 616 : 2017 IEC 60065 : 2014 Reviewed In : 2023	Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)	LITD 7
2	IS 694 : 2010 Reviewed In : 2020	Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1 100 V (Fourth Revision)	ETD 9
3	IS 1271 : 2012 IEC 60085 Reviewed In : 2024	Electrical insulation - Thermal evaluation and designation (Second Revision)	ETD 2
4	IS 1293 : 2019 IEC 60884-1	Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)	ETD 14
5	IS 1401 : 2008 IEC 61032 Reviewed In : 2018 Reaffirmed but not taken up for revision	Protection of persons and equipment by enclosures - Probes for verification (Second Revision)	ETD 32
6	IS 1416 : 1972 Reviewed In : 2018	Specification for safety transformers (First Revision)	ETD 32
7	IS 2824 : 2007 IEC 60112 : 2003 Reviewed In : 2017	Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Second Revision)	ETD 2
8	IS 3010 (Part 1) : 1965 Reviewed In : 2019	Specification for appliance - connectors and appliance - Inlets (Non - Reversible Three - Pin Type): Part 1 appliance - Connectors	ETD 14
9	IS 3010 (Part 2) : 1965 Reviewed In : 2019	Specification for appliance - Connectors and appliance - Inlets (Non - Reversible Three - Pin Type): Part 2 appliance - inlets	ETD 14
10	IS 3323 : 1980 Reviewed In : 2017 Reaffirmed but not taken up for revision	Specification for bi-pin landholders for tubular fluorescent lamps (First Revision)	ETD 14
11	IS 5921 (Part 1) : 1993 IEC 249-1 Reviewed In : 2008	Metal-clad base materials for printed circuits for use in electronic and telecommunication equipment: Part 1 General requirements and test	LITD 5
12	IS 6616 : 1982 IEC 262 Reviewed In : 2011	Ballasts for high pressure mercury vapour lamps	ETD 23
13	IS 7809 (Part 3/Sec 5) : 1977 Reviewed In : 2021	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 specifications for individual materials: Sec 5 cellulosic paper with thermosetting adhesive	ETD 2
14	IS 7809 (Part 3/Sec 4) : 1977 Reviewed In : 2018	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 specifications for individual materials: Sec 4 cellulosic paper, creped with thermosetting adhesive	ETD 2
15	IS 7809 (Part 3/Sec 3) : 1981 Reviewed In : 2021	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 specification for individual materials: Sec 3 polyster film tapes (PETP) with non - Thermosetting adhesive	ETD 2
16	IS 7809 (Part 3/Sec 2) : 1981 Reviewed In : 2021	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials: Sec 2 Polyester film tapes (PETP) with thermosetting adhesive	ETD 2
17	IS 7809 (Part 3/Sec 1) : 1986 IEC 60454-2 Reviewed In : 2016	Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)	ETD 2
18	IS 7809 (Part 2) : 1977 IEC 60454-2 Reviewed In : 2021	Specification for pressure sensitive adhesive tapes for electrical purpose : Part 2 methods of test	ETD 2
19	IS 7809 (Part 1) : 1975 IEC 60454-1 Reviewed In : 2023	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 1 general requirements	ETD 2
20	IS 8913 : 1978 IEC 360 Reviewed In : 2024	Method of measurement of lamp cap temperature rise	ETD 23
21	IS 9000 (Part 7/Sec 15) : 1979 Reviewed In : 2019	Basic environmental testing procedures for electronic and electrical items: Part 7 impact test	LITD 1
22	IS 9968 (Part 1) : 1988 Reviewed In : 2020	Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision)	ETD 9
23	IS 9974 (Part 1) : 1981 IEC 662 Reviewed In : 2024	Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests	ETD 23
24	IS 9974 (Part 2) : 1981 IEC 662 Reviewed In : 2024	Specification for high pressure sodium vapour lamps: Part 2 standard lamp data sheets	ETD 23
25	IS 10276 (Part 2) : 1982 Reviewed In : 2018	Specification for edison screw lampholders: Part 2 standard data sheets for lampholders and gauges	ETD 14
26	IS 10322 (Part 5/Sec 4) : 1987 IEC 60598-2-4 Reviewed In : 2020	Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires	ETD 49
27	IS 11000 (Part 2/Sec 2) : 2008 IEC 60695-11-5: 2004 Reviewed In : 2019	Fire hazard testing: Part 2 test methods: Sec 2 needle - Flame test method - Apparatus, cofirmatory test arrangement and guidance (First Revision)	LITD 1
28	IS 11000 (Part 2/Sec 1) : 2018 IEC 60695-2-10 : 2013 Reviewed In : 2021	Fire hazard testing: Part 2 test methods: Sec 1 glow - Wire apparatus and common test procedure (Second Revision)	LITD 1
29	IS 11654 (Part 3/Sec 407) : 1989 Reviewed In : 2020	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 407 glass textile sleeving with pvc based coating - Medium breakdown strength	ETD 2
30	IS 11654 (Part 3/Sec 406) : 1989 Reviewed In : 2020	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 406 glass textile sleeving with pvc based coating - High breakdown strength	ETD 2
31	IS 11654 (Part 3/Sec 405) : 1989 Reviewed In : 2020	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 405 glass textile sleeving with acrylic based coating - Lower breakdown strength	ETD 2
32	IS 11654 (Part 3/Sec 404) : 1989 Reviewed In : 2020	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 404 glass textile sleeving with acrylic based coating - Medium breakdown strength	ETD 2
33	IS 11654 (Part 3/Sec 403) : 1989 Reviewed In : 2020	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 403 glass textile sleeving with acrylic based coating - High breakdown strength	ETD 2
34	IS 11654 (Part 3/Sec 103) : 1989 Reviewed In : 2020	Specification for flexible insulating sleevings: Part 3 specifications for individual types of sleevings: Sec 103 general purpose - Grade sleeving with unilateral tolerances with temperature index 90	ETD 2
35	IS 11654 (Part 3/Sec 1) : 1988 Reviewed In : 2020	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 1 general purpose grade sleeving with temperature index 90	ETD 2
36	IS 11654 (Part 2) : 2024 IEC 60684-2:2011	Specification for flexible insulating sleeving: Part 2 methods of test	ETD 2
37	IS 11654 (Part 1) : 2024 IEC 60667-1:2020	Specification for flexible insulating sleeving: Part 1 definitions and general requirements	ETD 2
38	IS 12063 : 1987	Classification of Degrees of Protection Provided by Enclosures of Electrical Equipment	ETD 1
39	IS 15382 (Part 1) : 2022 60664-1:2020	Insulation coordination for equipment within low - Voltage systems: Part 1 principles, requirements and tests (First Revision)	ETD 19
40	IS 15382 (Part 3) : 2019 IEC 60664-3 : 2006 Reviewed In : 2024	Insulation coordination for equipment within low-voltage systems : Part 3 use of coating potting or moulding for protection against pollution	ETD 19
41	IS 12948 : 1990 Reviewed In : 2024	Tungsten halogen lamps (Non - Vehicle) - Specification	ETD 23
42	SP 30 : 2023	National electrical code 2011 (First Revision)	ETD 20
43	IS/QC 302400 : 1994 Reviewed In : 2018	Fixed capacitors for use in electronic equipment: Sectional specification for fixed capacitors for electromagnetic interference suppression and connection to the supply mains	LITD 5

International Standards Referred In IS 10322 (Part 1) : 2014
Reviewed In : 2019

1	ISO 75 : 1987

IS 10322 (Part 1) : 2014
Reviewed In : 2019 is Referred in following Indian Standards :

1	IS 12274 : 1987	Safety requirements for electronic flash apparatus for photographic purposes	LITD 7
2	SP 7 : Group 1 : 2005	National Building Code--Of India 2005 Group 1	CED 46
3	IS/IEC 60079 : Part 15 : 2010	Explosive atmospheres: Part 15 equipment protection by type of protection "N" (First Revision)	ETD 22
4	IS 13021 : Part 1 : 1991	AC supplied electronic ballasts for tubular fluorescent lamps - Specification: Part 1 general and safety requirements	ETD 23
5	IS 15967 : Part 1 : 2013	Capacitors for use in tubular fluorescent and other discharge lamp circuits: Part 1 safety requirements	ETD 23
6	IS 15974 : 2013	Auxiliaries for lamps starting devices (Other Than Glow Starters) - Performance requirements	ETD 23
7	IS 16102 : Part 1 : 2012	Self - Ballasted led lamps for general lighting services: Part 1 safety requirements	ETD 23
8	IS 16103 : Part 1 : 2012	Led modules for general lighting: Part 1 safety requirements	ETD 23
9	IS 16103 : Part 2 : 2012	Led modules for general lighting: Part 2 performance requirements	ETD 23
10	IS 10322 : Part 4 : 1984	Luminaires - Part 4 : Methods of Tests	ETD 23
11	IS 16107 : Part 1 : 2012	Luminaires performance: Part 1 general requirements	ETD 49
12	IS 16107 : Part 2 : Sec 1 : 2012	Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire	ETD 49
13	IS 10322 : Part 5 : Sec 1 : 2012	Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)	ETD 49
14	IS 10322 : Part 5 : Sec 2 : 2012	Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)	ETD 49
15	IS 10322 : PART 5 : SEC 3 : 2012	Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)	ETD 49
16	IS 10322 : Part 5 : Sec 5 : 2013	Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)	ETD 49
17	IS 10322 : Part 5 : Sec 6 : 2013	Luminaires: Part 5 particular requirements: Sec 6 handlamps	ETD 49
18	IS 10322 : Part 5 : Sec 7 : 2017	Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)	ETD 49
19	IS 10322 : Part 5 : Sec 8 : 2013	Luminaires: Part 5 particular requirements: Sec 8 emergency lighting	ETD 49
20	IS 15885 : PART 1 : 2011	Safety of lamp controlgear: Part 1 general requirements	ETD 23
21	IS 15885 : PART 2 : SEC 1 : 2011	Safety of lamp control gear: Part 2 particular requirements: Sec 1 starting devices (Other Than Glow Starters)	ETD 23
22	IS 732 : 2019	Code of practice for electrical wiring installations (Fourth Revision)	ETD 20
23	IS/IEC 61730 : PART 2 : 2019	Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)	ETD 28
24	IS 6873 : Part 5 : 2019	Limits and Methods of Measurement of Radio Disturbance Characteristics Part 5 Electrical Lighting and Similar Equipment ( Third Revision )	LITD 9
25	IS 2418 : Part 1 : 2018	Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)	ETD 23
26	IS 2418 : Part 2 : 2018	Tubular fluorescent lamps for general lighting service: Part 2 performance requirements (Second Revision)	ETD 23
27	IS 16614 : Part 1 : 2018	Double- Capped LED Linear Lamps Part1 Safety Specification	ETD 23
28	IS 13450 : Part 2 : Sec 22 : 2021	Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 22 surgical cosmetic therapeutic and diagnostic laser equipment First Revision	MHD 15
29	IS/IEC 60079 : PART 7 : 2015	Explosive atmospheres: Part 7 equipment protection by increased safety "E" (First Revision)	ETD 22
30	IS 1258 : 2005	Bayonet lamp holders (Fourth Revision)	ETD 14
31	IS 10276 : Part 1 : 1982	Specification for edison screw lamp holders: Part 1 requirements and tests	ETD 14
32	IS 302 : Part 1 : 2008	Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)	ETD 32
33	IS 3025 : Part 16 : 2023	Methods of Sampling and Test Physical And Chemical for Water and Waste Water Part 16 Filterable Residue Total Dissolved Solids at 180 C Second Revision	CHD 36

Classification Details

Group	:	Electrical Appliances and Accessories
Sub Group	:	Lamps, Luminaire and Accessories
Sub Sub Group	:	Luminaires & lighting
Aspect	:	Product Specification
Certification	:	Voluntary Certification
Relevant Ministries	:	Ministry of Power, Ministry of Electronics and Information Technology
Sustainable development Goals :
Short Commom Man's Title	:	Luminaires Part 1 General Requirements and Tests
ITC-HS Code	:
Degree of Equivalence	:	Modified/Technically Equivalent
Identical/Equivalent International Standard(s)	:	IEC 60598-1(2003-10)
Harmonized with	:	IEC

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 10322 : Part 1 : 2014

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 1

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 1

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 10322 : Part 1 : 2014

List of Expired or Cancelled Licenses under IS : IS 10322 : Part 1 : 2014

List of laboratories for : IS 10322 : Part 1 : 2014

List of Amendement(s) for : IS 10322 : Part 1 : 2014

List of Gazette Document(s) for : IS 10322 : Part 1 : 2014

List of Corigenda Document(s) for : IS 10322 : Part 1 : 2014

List of Product Manuals & SIT